PCI: Fix typos and whitespace errors

Fix typos in drivers/pci.  Comment and whitespace changes only.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>

drivers/pci/ats.c

@@ -432,7 +432,7 @@ EXPORT_SYMBOL_GPL(pci_prg_resp_pasid_required);
  * @pdev: PCI device structure
  *
  * Returns negative value when PASID capability is not present.
- * Otherwise it returns the numer of supported PASIDs.
+ * Otherwise it returns the number of supported PASIDs.
  */
 int pci_max_pasids(struct pci_dev *pdev)
 {

drivers/pci/controller/dwc/pcie-armada8k.c

@@ -55,7 +55,7 @@ struct armada8k_pcie {
 #define PCIE_ARUSER_REG			(PCIE_VENDOR_REGS_OFFSET + 0x5C)
 #define PCIE_AWUSER_REG			(PCIE_VENDOR_REGS_OFFSET + 0x60)
 /*
- * AR/AW Cache defauls: Normal memory, Write-Back, Read / Write
+ * AR/AW Cache defaults: Normal memory, Write-Back, Read / Write
  * allocate
  */
 #define ARCACHE_DEFAULT_VALUE		0x3511

drivers/pci/controller/dwc/pcie-kirin.c

@@ -2,7 +2,7 @@
 /*
  * PCIe host controller driver for Kirin Phone SoCs
  *
- * Copyright (C) 2017 Hilisicon Electronics Co., Ltd.
+ * Copyright (C) 2017 HiSilicon Electronics Co., Ltd.
  *		http://www.huawei.com
  *
  * Author: Xiaowei Song <songxiaowei@huawei.com>

drivers/pci/controller/pci-aardvark.c

@@ -308,7 +308,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 
 	advk_writel(pcie, PCIE_ISR1_ALL_MASK, PCIE_ISR1_MASK_REG);
 
-	/* Unmask all MSI's */
+	/* Unmask all MSIs */
 	advk_writel(pcie, 0, PCIE_MSI_MASK_REG);
 
 	/* Enable summary interrupt for GIC SPI source */

drivers/pci/controller/pcie-iproc-platform.c

@@ -87,7 +87,7 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
 
 	/*
 	 * DT nodes are not used by all platforms that use the iProc PCIe
-	 * core driver. For platforms that require explict inbound mapping
+	 * core driver. For platforms that require explicit inbound mapping
 	 * configuration, "dma-ranges" would have been present in DT
 	 */
 	pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges");

drivers/pci/controller/pcie-iproc.c

@@ -163,7 +163,7 @@ enum iproc_pcie_ib_map_type {
  * @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or
  * SZ_1G
  * @region_sizes: list of supported inbound mapping region sizes in KB, MB, or
- * GB, depedning on the size unit
+ * GB, depending on the size unit
  * @nr_sizes: number of supported inbound mapping region sizes
  * @nr_windows: number of supported inbound mapping windows for the region
  * @imap_addr_offset: register offset between the upper and lower 32-bit

drivers/pci/controller/vmd.c

@@ -627,7 +627,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	 * 32-bit resources.  __pci_assign_resource() enforces that
 	 * artificial restriction to make sure everything will fit.
 	 *
-	 * The only way we could use a 64-bit non-prefechable MEMBAR is
+	 * The only way we could use a 64-bit non-prefetchable MEMBAR is
 	 * if its address is <4GB so that we can convert it to a 32-bit
 	 * resource.  To be visible to the host OS, all VMD endpoints must
 	 * be initially configured by platform BIOS, which includes setting

drivers/pci/mmap.c

@@ -73,7 +73,7 @@ int pci_mmap_resource_range(struct pci_dev *pdev, int bar,
 #elif defined(HAVE_PCI_MMAP) /* && !ARCH_GENERIC_PCI_MMAP_RESOURCE */
 
 /*
- * Legacy setup: Impement pci_mmap_resource_range() as a wrapper around
+ * Legacy setup: Implement pci_mmap_resource_range() as a wrapper around
  * the architecture's pci_mmap_page_range(), converting to "user visible"
  * addresses as necessary.
  */

drivers/pci/msi.c

@@ -237,7 +237,7 @@ static void msi_set_mask_bit(struct irq_data *data, u32 flag)
 }
 
 /**
- * pci_msi_mask_irq - Generic irq chip callback to mask PCI/MSI interrupts
+ * pci_msi_mask_irq - Generic IRQ chip callback to mask PCI/MSI interrupts
  * @data:	pointer to irqdata associated to that interrupt
  */
 void pci_msi_mask_irq(struct irq_data *data)
@@ -247,7 +247,7 @@ void pci_msi_mask_irq(struct irq_data *data)
 EXPORT_SYMBOL_GPL(pci_msi_mask_irq);
 
 /**
- * pci_msi_unmask_irq - Generic irq chip callback to unmask PCI/MSI interrupts
+ * pci_msi_unmask_irq - Generic IRQ chip callback to unmask PCI/MSI interrupts
  * @data:	pointer to irqdata associated to that interrupt
  */
 void pci_msi_unmask_irq(struct irq_data *data)
@@ -588,11 +588,11 @@ static int msi_verify_entries(struct pci_dev *dev)
  * msi_capability_init - configure device's MSI capability structure
  * @dev: pointer to the pci_dev data structure of MSI device function
  * @nvec: number of interrupts to allocate
- * @affd: description of automatic irq affinity assignments (may be %NULL)
+ * @affd: description of automatic IRQ affinity assignments (may be %NULL)
  *
  * Setup the MSI capability structure of the device with the requested
  * number of interrupts.  A return value of zero indicates the successful
- * setup of an entry with the new MSI irq.  A negative return value indicates
+ * setup of an entry with the new MSI IRQ.  A negative return value indicates
  * an error, and a positive return value indicates the number of interrupts
  * which could have been allocated.
  */
@@ -609,7 +609,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec,
 	if (!entry)
 		return -ENOMEM;
 
-	/* All MSIs are unmasked by default, Mask them all */
+	/* All MSIs are unmasked by default; mask them all */
 	mask = msi_mask(entry->msi_attrib.multi_cap);
 	msi_mask_irq(entry, mask, mask);
 
@@ -637,7 +637,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec,
 		return ret;
 	}
 
-	/* Set MSI enabled bits	 */
+	/* Set MSI enabled bits	*/
 	pci_intx_for_msi(dev, 0);
 	pci_msi_set_enable(dev, 1);
 	dev->msi_enabled = 1;
@@ -729,11 +729,11 @@ static void msix_program_entries(struct pci_dev *dev,
  * @dev: pointer to the pci_dev data structure of MSI-X device function
  * @entries: pointer to an array of struct msix_entry entries
  * @nvec: number of @entries
- * @affd: Optional pointer to enable automatic affinity assignement
+ * @affd: Optional pointer to enable automatic affinity assignment
  *
  * Setup the MSI-X capability structure of device function with a
- * single MSI-X irq. A return of zero indicates the successful setup of
- * requested MSI-X entries with allocated irqs or non-zero for otherwise.
+ * single MSI-X IRQ. A return of zero indicates the successful setup of
+ * requested MSI-X entries with allocated IRQs or non-zero for otherwise.
  **/
 static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
 				int nvec, struct irq_affinity *affd)
@@ -789,7 +789,7 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
 out_avail:
 	if (ret < 0) {
 		/*
-		 * If we had some success, report the number of irqs
+		 * If we had some success, report the number of IRQs
 		 * we succeeded in setting up.
 		 */
 		struct msi_desc *entry;
@@ -812,7 +812,7 @@ static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries,
 /**
  * pci_msi_supported - check whether MSI may be enabled on a device
  * @dev: pointer to the pci_dev data structure of MSI device function
- * @nvec: how many MSIs have been requested ?
+ * @nvec: how many MSIs have been requested?
  *
  * Look at global flags, the device itself, and its parent buses
  * to determine if MSI/-X are supported for the device. If MSI/-X is
@@ -896,7 +896,7 @@ static void pci_msi_shutdown(struct pci_dev *dev)
 	/* Keep cached state to be restored */
 	__pci_msi_desc_mask_irq(desc, mask, ~mask);
 
-	/* Restore dev->irq to its default pin-assertion irq */
+	/* Restore dev->irq to its default pin-assertion IRQ */
 	dev->irq = desc->msi_attrib.default_irq;
 	pcibios_alloc_irq(dev);
 }
@@ -958,7 +958,7 @@ static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
 		}
 	}
 
-	/* Check whether driver already requested for MSI irq */
+	/* Check whether driver already requested for MSI IRQ */
 	if (dev->msi_enabled) {
 		pci_info(dev, "can't enable MSI-X (MSI IRQ already assigned)\n");
 		return -EINVAL;
@@ -1026,7 +1026,7 @@ static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec,
 	if (!pci_msi_supported(dev, minvec))
 		return -EINVAL;
 
-	/* Check whether driver already requested MSI-X irqs */
+	/* Check whether driver already requested MSI-X IRQs */
 	if (dev->msix_enabled) {
 		pci_info(dev, "can't enable MSI (MSI-X already enabled)\n");
 		return -EINVAL;
@@ -1113,8 +1113,8 @@ static int __pci_enable_msix_range(struct pci_dev *dev,
  * pci_enable_msix_range - configure device's MSI-X capability structure
  * @dev: pointer to the pci_dev data structure of MSI-X device function
  * @entries: pointer to an array of MSI-X entries
- * @minvec: minimum number of MSI-X irqs requested
- * @maxvec: maximum number of MSI-X irqs requested
+ * @minvec: minimum number of MSI-X IRQs requested
+ * @maxvec: maximum number of MSI-X IRQs requested
  *
  * Setup the MSI-X capability structure of device function with a maximum
  * possible number of interrupts in the range between @minvec and @maxvec
@@ -1179,7 +1179,7 @@ int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs,
 			return msi_vecs;
 	}
 
-	/* use legacy irq if allowed */
+	/* use legacy IRQ if allowed */
 	if (flags & PCI_IRQ_LEGACY) {
 		if (min_vecs == 1 && dev->irq) {
 			/*
@@ -1248,7 +1248,7 @@ int pci_irq_vector(struct pci_dev *dev, unsigned int nr)
 EXPORT_SYMBOL(pci_irq_vector);
 
 /**
- * pci_irq_get_affinity - return the affinity of a particular msi vector
+ * pci_irq_get_affinity - return the affinity of a particular MSI vector
  * @dev:	PCI device to operate on
  * @nr:		device-relative interrupt vector index (0-based).
  */
@@ -1280,7 +1280,7 @@ const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr)
 EXPORT_SYMBOL(pci_irq_get_affinity);
 
 /**
- * pci_irq_get_node - return the numa node of a particular msi vector
+ * pci_irq_get_node - return the NUMA node of a particular MSI vector
  * @pdev:	PCI device to operate on
  * @vec:	device-relative interrupt vector index (0-based).
  */
@@ -1330,7 +1330,7 @@ void pci_msi_domain_write_msg(struct irq_data *irq_data, struct msi_msg *msg)
 /**
  * pci_msi_domain_calc_hwirq - Generate a unique ID for an MSI source
  * @dev:	Pointer to the PCI device
- * @desc:	Pointer to the msi descriptor
+ * @desc:	Pointer to the MSI descriptor
  *
  * The ID number is only used within the irqdomain.
  */
@@ -1348,7 +1348,8 @@ static inline bool pci_msi_desc_is_multi_msi(struct msi_desc *desc)
 }
 
 /**
- * pci_msi_domain_check_cap - Verify that @domain supports the capabilities for @dev
+ * pci_msi_domain_check_cap - Verify that @domain supports the capabilities
+ * 			      for @dev
  * @domain:	The interrupt domain to check
  * @info:	The domain info for verification
  * @dev:	The device to check

drivers/pci/p2pdma.c

@@ -223,7 +223,7 @@ EXPORT_SYMBOL_GPL(pci_p2pdma_add_resource);
 
 /*
  * Note this function returns the parent PCI device with a
- * reference taken. It is the caller's responsibily to drop
+ * reference taken. It is the caller's responsibility to drop
  * the reference.
  */
 static struct pci_dev *find_parent_pci_dev(struct device *dev)
@@ -380,7 +380,7 @@ static int upstream_bridge_distance(struct pci_dev *provider,
 
 	/*
 	 * Allow the connection if both devices are on a whitelisted root
-	 * complex, but add an arbitary large value to the distance.
+	 * complex, but add an arbitrary large value to the distance.
 	 */
 	if (root_complex_whitelist(provider) &&
 	    root_complex_whitelist(client))
@@ -439,7 +439,7 @@ static int upstream_bridge_distance_warn(struct pci_dev *provider,
 }
 
 /**
- * pci_p2pdma_distance_many - Determive the cumulative distance between
+ * pci_p2pdma_distance_many - Determine the cumulative distance between
  *	a p2pdma provider and the clients in use.
  * @provider: p2pdma provider to check against the client list
  * @clients: array of devices to check (NULL-terminated)

drivers/pci/pci-bridge-emul.c

@@ -305,7 +305,7 @@ int pci_bridge_emul_init(struct pci_bridge_emul *bridge,
 }
 
 /*
- * Cleanup a pci_bridge_emul structure that was previously initilized
+ * Cleanup a pci_bridge_emul structure that was previously initialized
  * using pci_bridge_emul_init().
  */
 void pci_bridge_emul_cleanup(struct pci_bridge_emul *bridge)

drivers/pci/pci-pf-stub.c

@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /* pci-pf-stub - simple stub driver for PCI SR-IOV PF device
  *
- * This driver is meant to act as a "whitelist" for devices that provde
+ * This driver is meant to act as a "whitelist" for devices that provide
  * SR-IOV functionality while at the same time not actually needing a
  * driver of their own.
  */

drivers/pci/pci.c

@@ -4501,7 +4501,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
 
 	/*
 	 * Wait for Transaction Pending bit to clear.  A word-aligned test
-	 * is used, so we use the conrol offset rather than status and shift
+	 * is used, so we use the control offset rather than status and shift
 	 * the test bit to match.
 	 */
 	if (!pci_wait_for_pending(dev, pos + PCI_AF_CTRL,

drivers/pci/pcie/aer_inject.c

@@ -2,7 +2,7 @@
 /*
  * PCIe AER software error injection support.
  *
- * Debuging PCIe AER code is quite difficult because it is hard to
+ * Debugging PCIe AER code is quite difficult because it is hard to
  * trigger various real hardware errors. Software based error
  * injection can fake almost all kinds of errors with the help of a
  * user space helper tool aer-inject, which can be gotten from:

include/linux/pci.h

@@ -382,7 +382,7 @@ struct pci_dev {
 
 	unsigned int	is_busmaster:1;		/* Is busmaster */
 	unsigned int	no_msi:1;		/* May not use MSI */
-	unsigned int	no_64bit_msi:1; 	/* May only use 32-bit MSIs */
+	unsigned int	no_64bit_msi:1;		/* May only use 32-bit MSIs */
 	unsigned int	block_cfg_access:1;	/* Config space access blocked */
 	unsigned int	broken_parity_status:1;	/* Generates false positive parity */
 	unsigned int	irq_reroute_variant:2;	/* Needs IRQ rerouting variant */

include/linux/pci_ids.h

@@ -1112,7 +1112,7 @@
 
 #define PCI_VENDOR_ID_AL		0x10b9
 #define PCI_DEVICE_ID_AL_M1533		0x1533
-#define PCI_DEVICE_ID_AL_M1535 		0x1535
+#define PCI_DEVICE_ID_AL_M1535		0x1535
 #define PCI_DEVICE_ID_AL_M1541		0x1541
 #define PCI_DEVICE_ID_AL_M1563		0x1563
 #define PCI_DEVICE_ID_AL_M1621		0x1621
@@ -1752,7 +1752,7 @@
 #define PCI_VENDOR_ID_STALLION		0x124d
 
 /* Allied Telesyn */
-#define PCI_VENDOR_ID_AT    		0x1259
+#define PCI_VENDOR_ID_AT		0x1259
 #define PCI_SUBDEVICE_ID_AT_2700FX	0x2701
 #define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
 
@@ -2550,7 +2550,7 @@
 #define PCI_DEVICE_ID_KORENIX_JETCARDF2	0x1700
 #define PCI_DEVICE_ID_KORENIX_JETCARDF3	0x17ff
 
-#define PCI_VENDOR_ID_HUAWEI         	0x19e5
+#define PCI_VENDOR_ID_HUAWEI		0x19e5
 
 #define PCI_VENDOR_ID_NETRONOME		0x19ee
 #define PCI_DEVICE_ID_NETRONOME_NFP4000	0x4000