Merge branch 'am65-cpsw-nuss-switchdev-driver'

Vignesh Raghavendra says:

====================
net: ti: am65-cpsw-nuss: Add switchdev driver

This series adds switchdev support for AM65 CPSW NUSS driver to support
multi port CPSW present on J721e and AM64 SoCs.
It adds devlink hook to switch b/w switch mode and multi mac mode.

v2:
Rebased on latest net-next
Update patch 1/4 with rationale for using devlink
====================

Documentation/networking/device_drivers/ethernet/index.rst

@@ -49,6 +49,7 @@ Contents:
    stmicro/stmmac
    ti/cpsw
    ti/cpsw_switchdev
+   ti/am65_nuss_cpsw_switchdev
    ti/tlan
    toshiba/spider_net
 

Documentation/networking/device_drivers/ethernet/ti/am65_nuss_cpsw_switchdev.rst

@@ -0,0 +1,143 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================================================
+Texas Instruments K3 AM65 CPSW NUSS switchdev based ethernet driver
+===================================================================
+
+:Version: 1.0
+
+Port renaming
+=============
+
+In order to rename via udev::
+
+    ip -d link show dev sw0p1 | grep switchid
+
+    SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}==<switchid>, \
+	    ATTR{phys_port_name}!="", NAME="sw0$attr{phys_port_name}"
+
+
+Multi mac mode
+==============
+
+- The driver is operating in multi-mac mode by default, thus
+  working as N individual network interfaces.
+
+Devlink configuration parameters
+================================
+
+See Documentation/networking/devlink/am65-nuss-cpsw-switch.rst
+
+Enabling "switch"
+=================
+
+The Switch mode can be enabled by configuring devlink driver parameter
+"switch_mode" to 1/true::
+
+        devlink dev param set platform/c000000.ethernet \
+        name switch_mode value true cmode runtime
+
+This can be done regardless of the state of Port's netdev devices - UP/DOWN, but
+Port's netdev devices have to be in UP before joining to the bridge to avoid
+overwriting of bridge configuration as CPSW switch driver completely reloads its
+configuration when first port changes its state to UP.
+
+When the both interfaces joined the bridge - CPSW switch driver will enable
+marking packets with offload_fwd_mark flag.
+
+All configuration is implemented via switchdev API.
+
+Bridge setup
+============
+
+::
+
+        devlink dev param set platform/c000000.ethernet \
+        name switch_mode value true cmode runtime
+
+	ip link add name br0 type bridge
+	ip link set dev br0 type bridge ageing_time 1000
+	ip link set dev sw0p1 up
+	ip link set dev sw0p2 up
+	ip link set dev sw0p1 master br0
+	ip link set dev sw0p2 master br0
+
+	[*] bridge vlan add dev br0 vid 1 pvid untagged self
+
+	[*] if vlan_filtering=1. where default_pvid=1
+
+	Note. Steps [*] are mandatory.
+
+
+On/off STP
+==========
+
+::
+
+	ip link set dev BRDEV type bridge stp_state 1/0
+
+VLAN configuration
+==================
+
+::
+
+  bridge vlan add dev br0 vid 1 pvid untagged self <---- add cpu port to VLAN 1
+
+Note. This step is mandatory for bridge/default_pvid.
+
+Add extra VLANs
+===============
+
+ 1. untagged::
+
+	bridge vlan add dev sw0p1 vid 100 pvid untagged master
+	bridge vlan add dev sw0p2 vid 100 pvid untagged master
+	bridge vlan add dev br0 vid 100 pvid untagged self <---- Add cpu port to VLAN100
+
+ 2. tagged::
+
+	bridge vlan add dev sw0p1 vid 100 master
+	bridge vlan add dev sw0p2 vid 100 master
+	bridge vlan add dev br0 vid 100 pvid tagged self <---- Add cpu port to VLAN100
+
+FDBs
+----
+
+FDBs are automatically added on the appropriate switch port upon detection
+
+Manually adding FDBs::
+
+    bridge fdb add aa:bb:cc:dd:ee:ff dev sw0p1 master vlan 100
+    bridge fdb add aa:bb:cc:dd:ee:fe dev sw0p2 master <---- Add on all VLANs
+
+MDBs
+----
+
+MDBs are automatically added on the appropriate switch port upon detection
+
+Manually adding MDBs::
+
+  bridge mdb add dev br0 port sw0p1 grp 239.1.1.1 permanent vid 100
+  bridge mdb add dev br0 port sw0p1 grp 239.1.1.1 permanent <---- Add on all VLANs
+
+Multicast flooding
+==================
+CPU port mcast_flooding is always on
+
+Turning flooding on/off on swithch ports:
+bridge link set dev sw0p1 mcast_flood on/off
+
+Access and Trunk port
+=====================
+
+::
+
+ bridge vlan add dev sw0p1 vid 100 pvid untagged master
+ bridge vlan add dev sw0p2 vid 100 master
+
+
+ bridge vlan add dev br0 vid 100 self
+ ip link add link br0 name br0.100 type vlan id 100
+
+Note. Setting PVID on Bridge device itself works only for
+default VLAN (default_pvid).

Documentation/networking/devlink/am65-nuss-cpsw-switch.rst

@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+am65-cpsw-nuss devlink support
+==============================
+
+This document describes the devlink features implemented by the ``am65-cpsw-nuss``
+device driver.
+
+Parameters
+==========
+
+The ``am65-cpsw-nuss`` driver implements the following driver-specific
+parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``switch_mode``
+     - Boolean
+     - runtime
+     - Enable switch mode

Documentation/networking/devlink/index.rst

@@ -45,3 +45,4 @@ parameters, info versions, and other features it supports.
    sja1105
    qed
    ti-cpsw-switch
+   am65-nuss-cpsw-switch

drivers/net/ethernet/ti/Kconfig

@@ -92,6 +92,7 @@ config TI_CPTS
 config TI_K3_AM65_CPSW_NUSS
 	tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
 	depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+	select NET_DEVLINK
 	select TI_DAVINCI_MDIO
 	imply PHY_TI_GMII_SEL
 	depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS
@@ -105,6 +106,15 @@ config TI_K3_AM65_CPSW_NUSS
 	  To compile this driver as a module, choose M here: the module
 	  will be called ti-am65-cpsw-nuss.
 
+config TI_K3_AM65_CPSW_SWITCHDEV
+	bool "TI K3 AM654x/J721E CPSW Switch mode support"
+	depends on TI_K3_AM65_CPSW_NUSS
+	depends on NET_SWITCHDEV
+	help
+	 This enables switchdev support for TI K3 CPSWxG Ethernet
+	 Switch. Enable this driver to support hardware switch support for AM65
+	 CPSW NUSS driver.
+
 config TI_K3_AM65_CPTS
 	tristate "TI K3 AM65x CPTS"
 	depends on ARCH_K3 && OF

drivers/net/ethernet/ti/Makefile

@@ -26,4 +26,5 @@ keystone_netcp_ethss-y := netcp_ethss.o netcp_sgmii.o netcp_xgbepcsr.o cpsw_ale.
 
 obj-$(CONFIG_TI_K3_AM65_CPSW_NUSS) += ti-am65-cpsw-nuss.o
 ti-am65-cpsw-nuss-y := am65-cpsw-nuss.o cpsw_sl.o am65-cpsw-ethtool.o cpsw_ale.o k3-cppi-desc-pool.o am65-cpsw-qos.o
+ti-am65-cpsw-nuss-$(CONFIG_TI_K3_AM65_CPSW_SWITCHDEV) += am65-cpsw-switchdev.o
 obj-$(CONFIG_TI_K3_AM65_CPTS) += am65-cpts.o