Merge tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/lin…

…ux/kernel/git/krzk/linux into soc/dt

Samsung DTS ARM64 changes for v6.10, part two

Few changes exclusively for Google GS101:
1. Add HSI0 and HSI2 clock controllers (CMUs).
2. Add USB 3.1 Dual Role Device (DRD) support.
3. Add UFS (Universal Flash Storage) support.
4. Document bus clocks in pin controllers necessary for accessing
   registers.

* tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
  arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
  arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
  arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
  arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator
  arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes
  arm64: dts: exynos: gs101: Add the hsi2 sysreg node
  dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible
  arm64: dts: exynos: gs101-oriole: enable USB on this board
  arm64: dts: exynos: gs101: add USB & USB-phy nodes
  arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller
  arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller
  dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
  dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit

Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/clock/google,gs101-clock.yaml

@@ -30,16 +30,18 @@ properties:
       - google,gs101-cmu-top
       - google,gs101-cmu-apm
       - google,gs101-cmu-misc
+      - google,gs101-cmu-hsi0
+      - google,gs101-cmu-hsi2
       - google,gs101-cmu-peric0
       - google,gs101-cmu-peric1
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
 
   clock-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
 
   "#clock-cells":
     const: 1
@@ -72,6 +74,55 @@ allOf:
           items:
             - const: oscclk
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,gs101-cmu-hsi0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: HSI0 bus clock (from CMU_TOP)
+            - description: DPGTC (from CMU_TOP)
+            - description: USB DRD controller clock (from CMU_TOP)
+            - description: USB Display Port debug clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: dpgtc
+            - const: usb31drd
+            - const: usbdpdbg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - google,gs101-cmu-hsi2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24.576 MHz)
+            - description: High Speed Interface bus clock (from CMU_TOP)
+            - description: High Speed Interface pcie clock (from CMU_TOP)
+            - description: High Speed Interface ufs clock (from CMU_TOP)
+            - description: High Speed Interface mmc clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: bus
+            - const: pcie
+            - const: ufs
+            - const: mmc
+
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml

@@ -15,6 +15,7 @@ properties:
       - items:
           - enum:
               - google,gs101-apm-sysreg
+              - google,gs101-hsi2-sysreg
               - google,gs101-peric0-sysreg
               - google,gs101-peric1-sysreg
               - samsung,exynos3-sysreg
@@ -72,6 +73,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - google,gs101-hsi2-sysreg
               - google,gs101-peric0-sysreg
               - google,gs101-peric1-sysreg
               - samsung,exynos850-cmgp-sysreg

arch/arm64/boot/dts/exynos/google/gs101-oriole.dts

@@ -53,6 +53,21 @@
 			wakeup-source;
 		};
 	};
+
+	/* TODO: Remove this once PMIC is implemented  */
+	reg_placeholder: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "placeholder_reg";
+	};
+
+	/* TODO: Remove this once S2MPG11 slave PMIC is implemented  */
+	ufs_0_fixed_vcc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "ufs-vcc";
+		gpio = <&gpp0 1 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
 };
 
 &ext_24_5m {
@@ -106,6 +121,33 @@
 	status = "okay";
 };
 
+&ufs_0 {
+	status = "okay";
+	vcc-supply = <&ufs_0_fixed_vcc_reg>;
+};
+
+&ufs_0_phy {
+	status = "okay";
+};
+
+&usbdrd31 {
+	status = "okay";
+	vdd10-supply = <&reg_placeholder>;
+	vdd33-supply = <&reg_placeholder>;
+};
+
+&usbdrd31_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	maximum-speed = "super-speed-plus";
+	status = "okay";
+};
+
+&usbdrd31_phy {
+	status = "okay";
+};
+
 &usi_uart {
 	samsung,clkreq-on; /* needed for UART mode */
 	status = "okay";

arch/arm64/boot/dts/exynos/google/gs101.dtsi

@@ -370,6 +370,8 @@
 		pinctrl_peric0: pinctrl@10840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x10840000 0x00001000>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
@@ -914,6 +916,8 @@
 		pinctrl_peric1: pinctrl@10c40000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x10c40000 0x00001000>;
+			clocks = <&cmu_peric1 CLK_GOUT_PERIC1_GPIO_PERIC1_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
@@ -1247,18 +1251,132 @@
 			};
 		};
 
+		cmu_hsi0: clock-controller@11000000 {
+			compatible = "google,gs101-cmu-hsi0";
+			reg = <0x11000000 0x4000>;
+			#clock-cells = <1>;
+
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_DPGTC>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USB31DRD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI0_USBDPDBG>;
+			clock-names = "oscclk", "bus", "dpgtc", "usb31drd",
+				      "usbdpdbg";
+		};
+
+		usbdrd31_phy: phy@11100000 {
+			compatible = "google,gs101-usb31drd-phy";
+			reg = <0x11100000 0x0100>,
+			      <0x110f0000 0x0800>,
+			      <0x110e0000 0x2800>;
+			reg-names = "phy", "pcs", "pma";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd31: usb@11110000 {
+			compatible = "google,gs101-dwusb3";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x11110000 0x10000>;
+			status = "disabled";
+
+			usbdrd31_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+				clock-names = "ref";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				status = "disabled";
+			};
+		};
+
 		pinctrl_hsi1: pinctrl@11840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x11840000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		cmu_hsi2: clock-controller@14400000 {
+			compatible = "google,gs101-cmu-hsi2";
+			reg = <0x14400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&ext_24_5m>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_PCIE>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_UFS_EMBD>,
+				 <&cmu_top CLK_DOUT_CMU_HSI2_MMC_CARD>;
+			clock-names = "oscclk", "bus", "pcie", "ufs", "mmc";
+		};
+
+		sysreg_hsi2: syscon@14420000 {
+			compatible = "google,gs101-hsi2-sysreg", "syscon";
+			reg = <0x14420000 0x10000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+		};
+
 		pinctrl_hsi2: pinctrl@14440000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x14440000 0x00001000>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_GPIO_HSI2_PCLK>;
+			clock-names = "pclk";
 			interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
+		ufs_0: ufs@14700000 {
+			compatible = "google,gs101-ufs";
+			reg = <0x14700000 0x200>,
+			      <0x14701100 0x200>,
+			      <0x14780000 0xa000>,
+			      <0x14600000 0x100>;
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_CLK_UNIPRO>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_UFS_EMBD_I_FMP_CLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_ACLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_QE_UFS_EMBD_HSI2_PCLK>,
+				 <&cmu_hsi2 CLK_GOUT_HSI2_SYSREG_HSI2_PCLK>;
+			clock-names = "core_clk", "sclk_unipro_main", "fmp",
+				      "aclk", "pclk", "sysreg";
+			freq-table-hz = <0 0>, <0 0>, <0 0>, <0 0>, <0 0>, <0 0>;
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			pinctrl-names = "default";
+			phys = <&ufs_0_phy>;
+			phy-names = "ufs-phy";
+			samsung,sysreg = <&sysreg_hsi2 0x710>;
+			status = "disabled";
+		};
+
+		ufs_0_phy: phy@14704000 {
+			compatible = "google,gs101-ufs-phy";
+			reg = <0x14704000 0x3000>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&ext_24_5m>;
+			clock-names = "ref_clk";
+			status = "disabled";
+		};
+
 		cmu_apm: clock-controller@17400000 {
 			compatible = "google,gs101-cmu-apm";
 			reg = <0x17400000 0x8000>;
@@ -1281,6 +1399,8 @@
 		pinctrl_gpio_alive: pinctrl@174d0000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x174d0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK>;
+			clock-names = "pclk";
 
 			wakeup-interrupt-controller {
 				compatible = "google,gs101-wakeup-eint",
@@ -1292,6 +1412,8 @@
 		pinctrl_far_alive: pinctrl@174e0000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x174e0000 0x00001000>;
+			clocks = <&cmu_apm CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK>;
+			clock-names = "pclk";
 
 			wakeup-interrupt-controller {
 				compatible = "google,gs101-wakeup-eint",
@@ -1303,11 +1425,17 @@
 		pinctrl_gsactrl: pinctrl@17940000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x17940000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
 		};
 
 		pinctrl_gsacore: pinctrl@17a80000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x17a80000 0x00001000>;
+			/* TODO: update once support for this CMU exists */
+			clocks = <0>;
+			clock-names = "pclk";
 		};
 
 		cmu_top: clock-controller@1e080000 {