Merge tag 'asoc-fix-v4.9-rc3' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.9

The most important fix in here is a change which removes the #error
making the topology API unusable as-is since we have recently discovered
some production uses on Chromebooks so need to acknowledge that what
we've got there now is an ABI.

There's also a very big batch of driver specific fixes here which have
kept on being delayed due to more arriving so the update is another of
these bigger than I would like ones.  There is one especially big one in
there, for the Qualcomm code which fixes simultaneous playback and
capture which was broken during the merge window.  The diff for that is
large because it moves blocks of code to different functions but it's
functionally fairly simple and if it breaks it should have been very
obvious in testing.

CREDITS

@@ -1864,10 +1864,11 @@ S: The Netherlands
 
 N: Martin Kepplinger
 E: martink@posteo.de
-E: martin.kepplinger@theobroma-systems.com
+E: martin.kepplinger@ginzinger.com
 W: http://www.martinkepplinger.com
 D: mma8452 accelerators iio driver
-D: Kernel cleanups
+D: pegasus_notetaker input driver
+D: Kernel fixes and cleanups
 S: Garnisonstraße 26
 S: 4020 Linz
 S: Austria

Documentation/ABI/testing/sysfs-class-cxl

@@ -220,8 +220,11 @@ What:           /sys/class/cxl/<card>/reset
 Date:           October 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    write only
-                Writing 1 will issue a PERST to card which may cause the card
-                to reload the FPGA depending on load_image_on_perst.
+                Writing 1 will issue a PERST to card provided there are no
+                contexts active on any one of the card AFUs. This may cause
+                the card to reload the FPGA depending on load_image_on_perst.
+                Writing -1 will do a force PERST irrespective of any active
+                contexts on the card AFUs.
 Users:		https://github.com/ibm-capi/libcxl
 
 What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)

Documentation/device-mapper/dm-raid.txt

@@ -309,3 +309,4 @@ Version History
 	with a reshape in progress.
 1.9.0   Add support for RAID level takeover/reshape/region size
 	and set size reduction.
+1.9.1   Fix activation of existing RAID 4/10 mapped devices

Documentation/devicetree/bindings/clock/uniphier-clock.txt

@@ -24,7 +24,7 @@ Example:
 		reg = <0x61840000 0x4000>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-clock";
+			compatible = "socionext,uniphier-ld11-clock";
 			#clock-cells = <1>;
 		};
 
@@ -43,19 +43,19 @@ Provided clocks:
 21: USB3 ch1 PHY1
 
 
-Media I/O (MIO) clock
----------------------
+Media I/O (MIO) clock, SD clock
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
     "socionext,uniphier-sld3-mio-clock" - for sLD3 SoC.
     "socionext,uniphier-ld4-mio-clock"  - for LD4 SoC.
     "socionext,uniphier-pro4-mio-clock" - for Pro4 SoC.
     "socionext,uniphier-sld8-mio-clock" - for sLD8 SoC.
-    "socionext,uniphier-pro5-mio-clock" - for Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-clock" - for PXs2/LD6b SoC.
+    "socionext,uniphier-pro5-sd-clock"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-clock"  - for PXs2/LD6b SoC.
     "socionext,uniphier-ld11-mio-clock" - for LD11 SoC.
-    "socionext,uniphier-ld20-mio-clock" - for LD20 SoC.
+    "socionext,uniphier-ld20-sd-clock"  - for LD20 SoC.
 - #clock-cells: should be 1.
 
 Example:
@@ -66,7 +66,7 @@ Example:
 		reg = <0x59810000 0x800>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-mio-clock";
+			compatible = "socionext,uniphier-ld11-mio-clock";
 			#clock-cells = <1>;
 		};
 
@@ -112,7 +112,7 @@ Example:
 		reg = <0x59820000 0x200>;
 
 		clock {
-			compatible = "socionext,uniphier-ld20-peri-clock";
+			compatible = "socionext,uniphier-ld11-peri-clock";
 			#clock-cells = <1>;
 		};
 

Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt

@@ -0,0 +1,23 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-bt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+	};

Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt

@@ -43,7 +43,9 @@ aspeed,ast2500-pinctrl, aspeed,g5-pinctrl:
 
 GPID0 GPID2 GPIE0 I2C10 I2C11 I2C12 I2C13 I2C14 I2C3 I2C4 I2C5 I2C6 I2C7 I2C8
 I2C9 MAC1LINK MDIO1 MDIO2 OSCCLK PEWAKE PWM0 PWM1 PWM2 PWM3 PWM4 PWM5 PWM6 PWM7
-RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 TIMER4 TIMER5 TIMER6 TIMER7 TIMER8
+RGMII1 RGMII2 RMII1 RMII2 SD1 SPI1 SPI1DEBUG SPI1PASSTHRU TIMER4 TIMER5 TIMER6
+TIMER7 TIMER8 VGABIOSROM
+
 
 Examples:
 

Documentation/devicetree/bindings/reset/uniphier-reset.txt

@@ -6,56 +6,56 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
+		compatible = "socionext,uniphier-ld11-sysctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x61840000 0x4000>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-reset";
+			compatible = "socionext,uniphier-ld11-reset";
 			#reset-cells = <1>;
 		};
 
 		other nodes ...
 	};
 
 
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	mioctrl@59810000 {
-		compatible = "socionext,uniphier-ld20-mioctrl",
+		compatible = "socionext,uniphier-ld11-mioctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59810000 0x800>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-mio-reset";
+			compatible = "socionext,uniphier-ld11-mio-reset";
 			#reset-cells = <1>;
 		};
 
@@ -68,24 +68,24 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	perictrl@59820000 {
-		compatible = "socionext,uniphier-ld20-perictrl",
+		compatible = "socionext,uniphier-ld11-perictrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59820000 0x200>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-peri-reset";
+			compatible = "socionext,uniphier-ld11-peri-reset";
 			#reset-cells = <1>;
 		};
 

Documentation/devicetree/bindings/serial/cdns,uart.txt

@@ -1,7 +1,9 @@
 Binding for Cadence UART Controller
 
 Required properties:
-- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps"
+- compatible :
+  Use "xlnx,xuartps","cdns,uart-r1p8" for Zynq-7xxx SoC.
+  Use "xlnx,zynqmp-uart","cdns,uart-r1p12" for Zynq Ultrascale+ MPSoC.
 - reg: Should contain UART controller registers location and length.
 - interrupts: Should contain UART controller interrupts.
 - clocks: Must contain phandles to the UART clocks

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -9,6 +9,14 @@ Required properties:
     - "renesas,scifb-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFB compatible UART.
     - "renesas,scifa-r8a7740" for R8A7740 (R-Mobile A1) SCIFA compatible UART.
     - "renesas,scifb-r8a7740" for R8A7740 (R-Mobile A1) SCIFB compatible UART.
+    - "renesas,scif-r8a7743" for R8A7743 (RZ/G1M) SCIF compatible UART.
+    - "renesas,scifa-r8a7743" for R8A7743 (RZ/G1M) SCIFA compatible UART.
+    - "renesas,scifb-r8a7743" for R8A7743 (RZ/G1M) SCIFB compatible UART.
+    - "renesas,hscif-r8a7743" for R8A7743 (RZ/G1M) HSCIF compatible UART.
+    - "renesas,scif-r8a7745" for R8A7745 (RZ/G1E) SCIF compatible UART.
+    - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
+    - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
+    - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.

Documentation/devicetree/bindings/timer/jcore,pit.txt

@@ -0,0 +1,24 @@
+J-Core Programmable Interval Timer and Clocksource
+
+Required properties:
+
+- compatible: Must be "jcore,pit".
+
+- reg: Memory region(s) for timer/clocksource registers. For SMP,
+  there should be one region per cpu, indexed by the sequential,
+  zero-based hardware cpu number.
+
+- interrupts: An interrupt to assign for the timer. The actual pit
+  core is integrated with the aic and allows the timer interrupt
+  assignment to be programmed by software, but this property is
+  required in order to reserve an interrupt number that doesn't
+  conflict with other devices.
+
+
+Example:
+
+timer@200 {
+	compatible = "jcore,pit";
+	reg = < 0x200 0x30 0x500 0x30 >;
+	interrupts = < 0x48 >;
+};

Documentation/devicetree/bindings/usb/dwc2.txt

@@ -28,10 +28,7 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties
 - g-use-dma: enable dma usage in gadget driver.
 - g-rx-fifo-size: size of rx fifo size in gadget mode.
 - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode.
-
-Deprecated properties:
-- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
-  in gadget mode.
+- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode.
 
 Example:
 

Documentation/filesystems/proc.txt

@@ -395,32 +395,6 @@ is not associated with a file:
 
  or if empty, the mapping is anonymous.
 
-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
-of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. Hence, for the example above, the
-task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
-
-08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
-08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
-0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
-a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0
-a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack]
-a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
-a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
-a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
-a800b000-a800e000 rw-p 00000000 00:00 0
-a800e000-a8022000 r-xp 00000000 03:00 14462      /lib/libpthread.so.0
-a8022000-a8023000 r--p 00013000 03:00 14462      /lib/libpthread.so.0
-a8023000-a8024000 rw-p 00014000 03:00 14462      /lib/libpthread.so.0
-a8024000-a8027000 rw-p 00000000 00:00 0
-a8027000-a8043000 r-xp 00000000 03:00 8317       /lib/ld-linux.so.2
-a8043000-a8044000 r--p 0001b000 03:00 8317       /lib/ld-linux.so.2
-a8044000-a8045000 rw-p 0001c000 03:00 8317       /lib/ld-linux.so.2
-aff35000-aff4a000 rw-p 00000000 00:00 0
-ffffe000-fffff000 r-xp 00000000 00:00 0          [vdso]
-
 The /proc/PID/smaps is an extension based on maps, showing the memory
 consumption for each of the process's mappings. For each of mappings there
 is a series of lines such as the following:

Documentation/gpio/board.txt

@@ -6,7 +6,7 @@ Note that it only applies to the new descriptor-based interface. For a
 description of the deprecated integer-based GPIO interface please refer to
 gpio-legacy.txt (actually, there is no real mapping possible with the old
 interface; you just fetch an integer from somewhere and request the
-corresponding GPIO.
+corresponding GPIO).
 
 All platforms can enable the GPIO library, but if the platform strictly
 requires GPIO functionality to be present, it needs to select GPIOLIB from its
@@ -162,6 +162,9 @@ The driver controlling "foo.0" will then be able to obtain its GPIOs as follows:
 
 Since the "led" GPIOs are mapped as active-high, this example will switch their
 signals to 1, i.e. enabling the LEDs. And for the "power" GPIO, which is mapped
-as active-low, its actual signal will be 0 after this code. Contrary to the legacy
-integer GPIO interface, the active-low property is handled during mapping and is
-thus transparent to GPIO consumers.
+as active-low, its actual signal will be 0 after this code. Contrary to the
+legacy integer GPIO interface, the active-low property is handled during
+mapping and is thus transparent to GPIO consumers.
+
+A set of functions such as gpiod_set_value() is available to work with
+the new descriptor-oriented interface.