Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Completely minor snmp doc conflict.

Signed-off-by: David S. Miller <davem@davemloft.net>

.clang-format

@@ -72,6 +72,10 @@ ForEachMacros:
   - 'apei_estatus_for_each_section'
   - 'ata_for_each_dev'
   - 'ata_for_each_link'
+  - '__ata_qc_for_each'
+  - 'ata_qc_for_each'
+  - 'ata_qc_for_each_raw'
+  - 'ata_qc_for_each_with_internal'
   - 'ax25_for_each'
   - 'ax25_uid_for_each'
   - 'bio_for_each_integrity_vec'
@@ -85,6 +89,7 @@ ForEachMacros:
   - 'blk_queue_for_each_rl'
   - 'bond_for_each_slave'
   - 'bond_for_each_slave_rcu'
+  - 'bpf_for_each_spilled_reg'
   - 'btree_for_each_safe128'
   - 'btree_for_each_safe32'
   - 'btree_for_each_safe64'
@@ -103,6 +108,8 @@ ForEachMacros:
   - 'drm_atomic_crtc_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane_state'
+  - 'drm_atomic_for_each_plane_damage'
+  - 'drm_connector_for_each_possible_encoder'
   - 'drm_for_each_connector_iter'
   - 'drm_for_each_crtc'
   - 'drm_for_each_encoder'
@@ -121,18 +128,32 @@ ForEachMacros:
   - 'for_each_bio'
   - 'for_each_board_func_rsrc'
   - 'for_each_bvec'
+  - 'for_each_card_components'
+  - 'for_each_card_links'
+  - 'for_each_card_links_safe'
+  - 'for_each_card_prelinks'
+  - 'for_each_card_rtds'
+  - 'for_each_card_rtds_safe'
+  - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
   - 'for_each_clear_bit_from'
   - 'for_each_cmsghdr'
   - 'for_each_compatible_node'
+  - 'for_each_component_dais'
+  - 'for_each_component_dais_safe'
+  - 'for_each_comp_order'
   - 'for_each_console'
   - 'for_each_cpu'
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
   - 'for_each_dev_addr'
   - 'for_each_dma_cap_mask'
+  - 'for_each_dpcm_be'
+  - 'for_each_dpcm_be_rollback'
+  - 'for_each_dpcm_be_safe'
+  - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
   - 'for_each_efi_memory_desc'
@@ -149,6 +170,7 @@ ForEachMacros:
   - 'for_each_iommu'
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
+  - 'for_each_link_codecs'
   - 'for_each_lru'
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
@@ -160,6 +182,7 @@ ForEachMacros:
   - 'for_each_mem_range_rev'
   - 'for_each_migratetype_order'
   - 'for_each_msi_entry'
+  - 'for_each_msi_entry_safe'
   - 'for_each_net'
   - 'for_each_netdev'
   - 'for_each_netdev_continue'
@@ -183,12 +206,14 @@ ForEachMacros:
   - 'for_each_node_with_property'
   - 'for_each_of_allnodes'
   - 'for_each_of_allnodes_from'
+  - 'for_each_of_cpu_node'
   - 'for_each_of_pci_range'
   - 'for_each_old_connector_in_state'
   - 'for_each_old_crtc_in_state'
   - 'for_each_oldnew_connector_in_state'
   - 'for_each_oldnew_crtc_in_state'
   - 'for_each_oldnew_plane_in_state'
+  - 'for_each_oldnew_plane_in_state_reverse'
   - 'for_each_oldnew_private_obj_in_state'
   - 'for_each_old_plane_in_state'
   - 'for_each_old_private_obj_in_state'
@@ -206,14 +231,17 @@ ForEachMacros:
   - 'for_each_process'
   - 'for_each_process_thread'
   - 'for_each_property_of_node'
+  - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_resv_unavail_range'
+  - 'for_each_rtd_codec_dai'
+  - 'for_each_rtd_codec_dai_rollback'
   - 'for_each_rtdcom'
   - 'for_each_rtdcom_safe'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_sg'
   - 'for_each_sg_page'
+  - 'for_each_sibling_event'
   - '__for_each_thread'
   - 'for_each_thread'
   - 'for_each_zone'
@@ -251,6 +279,8 @@ ForEachMacros:
   - 'hlist_nulls_for_each_entry_from'
   - 'hlist_nulls_for_each_entry_rcu'
   - 'hlist_nulls_for_each_entry_safe'
+  - 'i3c_bus_for_each_i2cdev'
+  - 'i3c_bus_for_each_i3cdev'
   - 'ide_host_for_each_port'
   - 'ide_port_for_each_dev'
   - 'ide_port_for_each_present_dev'
@@ -267,11 +297,14 @@ ForEachMacros:
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
+  - 'list_for_each_codec'
+  - 'list_for_each_codec_safe'
   - 'list_for_each_entry'
   - 'list_for_each_entry_continue'
   - 'list_for_each_entry_continue_rcu'
   - 'list_for_each_entry_continue_reverse'
   - 'list_for_each_entry_from'
+  - 'list_for_each_entry_from_rcu'
   - 'list_for_each_entry_from_reverse'
   - 'list_for_each_entry_lockless'
   - 'list_for_each_entry_rcu'
@@ -291,6 +324,7 @@ ForEachMacros:
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
+  - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
   - 'netdev_for_each_lower_private_rcu'
@@ -357,12 +391,14 @@ ForEachMacros:
   - 'sk_nulls_for_each'
   - 'sk_nulls_for_each_from'
   - 'sk_nulls_for_each_rcu'
+  - 'snd_array_for_each'
   - 'snd_pcm_group_for_each_entry'
   - 'snd_soc_dapm_widget_for_each_path'
   - 'snd_soc_dapm_widget_for_each_path_safe'
   - 'snd_soc_dapm_widget_for_each_sink_path'
   - 'snd_soc_dapm_widget_for_each_source_path'
   - 'tb_property_for_each'
+  - 'tcf_exts_for_each_action'
   - 'udp_portaddr_for_each_entry'
   - 'udp_portaddr_for_each_entry_rcu'
   - 'usb_hub_for_each_child'
@@ -371,6 +407,11 @@ ForEachMacros:
   - 'v4l2_m2m_for_each_dst_buf_safe'
   - 'v4l2_m2m_for_each_src_buf'
   - 'v4l2_m2m_for_each_src_buf_safe'
+  - 'virtio_device_for_each_vq'
+  - 'xa_for_each'
+  - 'xas_for_each'
+  - 'xas_for_each_conflict'
+  - 'xas_for_each_marked'
   - 'zorro_for_each_dev'
 
 #IncludeBlocks: Preserve # Unknown to clang-format-5.0

Documentation/devicetree/bindings/arm/cpu-capacity.txt

@@ -235,4 +235,4 @@ cpus {
 ===========================================
 
 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml

Documentation/devicetree/bindings/arm/idle-states.txt

@@ -684,7 +684,7 @@ cpus {
 ===========================================
 
 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml
 
 [2] ARM Linux Kernel documentation - PSCI bindings
     Documentation/devicetree/bindings/arm/psci.txt

Documentation/devicetree/bindings/arm/sp810.txt

@@ -4,7 +4,7 @@ SP810 System Controller
 Required properties:
 
 - compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.txt
+		see Documentation/devicetree/bindings/arm/primecell.yaml
 		for more details
 		should be: "arm,sp810", "arm,primecell"
 

Documentation/devicetree/bindings/arm/topology.txt

@@ -472,4 +472,4 @@ cpus {
 
 ===============================================================================
 [1] ARM Linux kernel documentation
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml

Documentation/devicetree/bindings/clock/marvell,mmp2.txt

@@ -18,4 +18,4 @@ Required Properties:
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.
 
-All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
+All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.

Documentation/devicetree/bindings/display/arm,pl11x.txt

@@ -1,6 +1,6 @@
 * ARM PrimeCell Color LCD Controller PL110/PL111
 
-See also Documentation/devicetree/bindings/arm/primecell.txt
+See also Documentation/devicetree/bindings/arm/primecell.yaml
 
 Required properties:
 

Documentation/devicetree/bindings/gpio/gpio-mvebu.txt

@@ -14,8 +14,6 @@ Required properties:
 
     "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
     SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
-    and
     Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
     for specific details about the offset property.
 

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -78,7 +78,7 @@ Sub-nodes:
 PPI affinity can be expressed as a single "ppi-partitions" node,
 containing a set of sub-nodes, each with the following property:
 - affinity: Should be a list of phandles to CPU nodes (as described in
-Documentation/devicetree/bindings/arm/cpus.txt).
+  Documentation/devicetree/bindings/arm/cpus.yaml).
 
 GICv3 has one or more Interrupt Translation Services (ITS) that are
 used to route Message Signalled Interrupts (MSI) to the CPUs.

Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt

@@ -55,7 +55,7 @@ of these nodes are defined by the individual bindings for the specific function
 = EXAMPLE
 The following example represents the GLINK RPM node on a MSM8996 device, with
 the function for the "rpm_request" channel defined, which is used for
-regualtors and root clocks.
+regulators and root clocks.
 
 	apcs_glb: mailbox@9820000 {
 		compatible = "qcom,msm8996-apcs-hmss-global";

Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt

@@ -41,12 +41,12 @@ processor ID) and a string identifier.
 - qcom,local-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the local endpoint of this edge
+	Definition: specifies the identifier of the local endpoint of this edge
 
 - qcom,remote-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the remote endpoint of this edge
+	Definition: specifies the identifier of the remote endpoint of this edge
 
 = SUBNODES
 Each SMP2P pair contain a set of inbound and outbound entries, these are

Documentation/fb/fbcon.txt

@@ -163,6 +163,14 @@ C. Boot options
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.
 
+7. fbcon=logo-pos:<location>
+
+	The only possible 'location' is 'center' (without quotes), and when
+	given, the bootup logo is moved from the default top-left corner
+	location to the center of the framebuffer. If more than one logo is
+	displayed due to multiple CPUs, the collected line of logos is moved
+	as a whole.
+
 C. Attaching, Detaching and Unloading
 
 Before going on to how to attach, detach and unload the framebuffer console, an

Documentation/networking/index.rst

@@ -11,19 +11,19 @@ Contents:
    batman-adv
    can
    can_ucan_protocol
-   dpaa2/index
-   e100
-   e1000
-   e1000e
-   fm10k
-   igb
-   igbvf
-   ixgb
-   ixgbe
-   ixgbevf
-   i40e
-   iavf
-   ice
+   device_drivers/freescale/dpaa2/index
+   device_drivers/intel/e100
+   device_drivers/intel/e1000
+   device_drivers/intel/e1000e
+   device_drivers/intel/fm10k
+   device_drivers/intel/igb
+   device_drivers/intel/igbvf
+   device_drivers/intel/ixgb
+   device_drivers/intel/ixgbe
+   device_drivers/intel/ixgbevf
+   device_drivers/intel/i40e
+   device_drivers/intel/iavf
+   device_drivers/intel/ice
    kapi
    z8530book
    msg_zerocopy

Documentation/networking/rxrpc.txt

@@ -1000,51 +1000,6 @@ The kernel interface functions are as follows:
      size should be set when the call is begun.  tx_total_len may not be less
      than zero.
 
- (*) Check to see the completion state of a call so that the caller can assess
-     whether it needs to be retried.
-
-	enum rxrpc_call_completion {
-		RXRPC_CALL_SUCCEEDED,
-		RXRPC_CALL_REMOTELY_ABORTED,
-		RXRPC_CALL_LOCALLY_ABORTED,
-		RXRPC_CALL_LOCAL_ERROR,
-		RXRPC_CALL_NETWORK_ERROR,
-	};
-
-	int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call,
-				    enum rxrpc_call_completion *_compl,
-				    u32 *_abort_code);
-
-     On return, -EINPROGRESS will be returned if the call is still ongoing; if
-     it is finished, *_compl will be set to indicate the manner of completion,
-     *_abort_code will be set to any abort code that occurred.  0 will be
-     returned on a successful completion, -ECONNABORTED will be returned if the
-     client failed due to a remote abort and anything else will return an
-     appropriate error code.
-
-     The caller should look at this information to decide if it's worth
-     retrying the call.
-
- (*) Retry a client call.
-
-	int rxrpc_kernel_retry_call(struct socket *sock,
-				    struct rxrpc_call *call,
-				    struct sockaddr_rxrpc *srx,
-				    struct key *key);
-
-     This attempts to partially reinitialise a call and submit it again while
-     reusing the original call's Tx queue to avoid the need to repackage and
-     re-encrypt the data to be sent.  call indicates the call to retry, srx the
-     new address to send it to and key the encryption key to use for signing or
-     encrypting the packets.
-
-     For this to work, the first Tx data packet must still be in the transmit
-     queue, and currently this is only permitted for local and network errors
-     and the call must not have been aborted.  Any partially constructed Tx
-     packet is left as is and can continue being filled afterwards.
-
-     It returns 0 if the call was requeued and an error otherwise.
-
  (*) Get call RTT.
 
 	u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call);