Merge branch 'sched/urgent'

mariux64 · Jul 8, 2020 · faa2fd7 · faa2fd7
2 parents 01e377c + ce3614d
commit faa2fd7
Show file tree

Hide file tree

Showing 1,250 changed files with 11,132 additions and 6,391 deletions.
diff --git a/.gitignore b/.gitignore
@@ -143,6 +143,9 @@ x509.genkey
 /allrandom.config
 /allyes.config
 
+# Kconfig savedefconfig output
+/defconfig
+
 # Kdevelop4
 *.kdev4
 

diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
@@ -56,11 +56,6 @@ Description:	The /dev/kmsg character device node provides userspace access
 		  seek after the last record available at the time
 		  the last SYSLOG_ACTION_CLEAR was issued.
 
-		Due to the record nature of this interface with a "read all"
-		behavior and the specific positions each seek operation sets,
-		SEEK_CUR is not supported, returning -ESPIPE (invalid seek) to
-		errno whenever requested.
-
 		The output format consists of a prefix carrying the syslog
 		prefix including priority and facility, the 64 bit message
 		sequence number and the monotonic timestamp in microseconds,

diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -0,0 +1,27 @@
+What:		/sys/bus/nd/devices/nmemX/papr/flags
+Date:		Apr, 2020
+KernelVersion:	v5.8
+Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
+Description:
+		(RO) Report flags indicating various states of a
+		papr-pmem NVDIMM device. Each flag maps to a one or
+		more bits set in the dimm-health-bitmap retrieved in
+		response to H_SCM_HEALTH hcall. The details of the bit
+		flags returned in response to this hcall is available
+		at 'Documentation/powerpc/papr_hcalls.rst' . Below are
+		the flags reported in this sysfs file:
+
+		* "not_armed"	: Indicates that NVDIMM contents will not
+				  survive a power cycle.
+		* "flush_fail"	: Indicates that NVDIMM contents
+				  couldn't be flushed during last
+				  shut-down event.
+		* "restore_fail": Indicates that NVDIMM contents
+				  couldn't be restored during NVDIMM
+				  initialization.
+		* "encrypted"	: NVDIMM contents are encrypted.
+		* "smart_notify": There is health event for the NVDIMM.
+		* "scrubbed"	: Indicating that contents of the
+				  NVDIMM have been scrubbed.
+		* "locked"	: Indicating that NVDIMM contents cant
+				  be modified until next power cycle.
diff --git a/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg b/Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg
@@ -1,6 +1,6 @@
 What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
 Date:		Feb 2014
-Contact:	Li Jun <b47624@freescale.com>
+Contact:	Li Jun <jun.li@nxp.com>
 Description:
 		Can be set and read.
 		Set a_bus_req(A-device bus request) input to be 1 if
@@ -17,7 +17,7 @@ Description:
 
 What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
 Date:		Feb 2014
-Contact:	Li Jun <b47624@freescale.com>
+Contact:	Li Jun <jun.li@nxp.com>
 Description:
 		Can be set and read
 		The a_bus_drop(A-device bus drop) input is 1 when the
@@ -32,7 +32,7 @@ Description:
 
 What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
 Date:		Feb 2014
-Contact:	Li Jun <b47624@freescale.com>
+Contact:	Li Jun <jun.li@nxp.com>
 Description:
 		Can be set and read.
 		The b_bus_req(B-device bus request) input is 1 during the time
@@ -47,7 +47,7 @@ Description:
 
 What:		/sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
 Date:		Feb 2014
-Contact:	Li Jun <b47624@freescale.com>
+Contact:	Li Jun <jun.li@nxp.com>
 Description:
 		Only can be set.
 		The a_clr_err(A-device Vbus error clear) input is used to clear

diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
@@ -1356,8 +1356,8 @@ PAGE_SIZE multiple when read back.
 
 	  thp_fault_alloc
 		Number of transparent hugepages which were allocated to satisfy
-		a page fault, including COW faults. This counter is not present
-		when CONFIG_TRANSPARENT_HUGEPAGE is not set.
+		a page fault. This counter is not present when CONFIG_TRANSPARENT_HUGEPAGE
+                is not set.
 
 	  thp_collapse_alloc
 		Number of transparent hugepages which were allocated to allow

diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
@@ -11,6 +11,7 @@ Device Mapper
     dm-clone
     dm-crypt
     dm-dust
+    dm-ebs
     dm-flakey
     dm-init
     dm-integrity

diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
@@ -305,8 +305,7 @@ monitor how successfully the system is providing huge pages for use.
 
 thp_fault_alloc
 	is incremented every time a huge page is successfully
-	allocated to handle a page fault. This applies to both the
-	first time a page is faulted and for COW faults.
+	allocated to handle a page fault.
 
 thp_collapse_alloc
 	is incremented by khugepaged when it has found

diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
@@ -147,6 +147,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Falkor v{1,2}   | E1041           | QCOM_FALKOR_ERRATUM_1041    |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1463225       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1418040       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1530923       |
++----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
@@ -186,7 +186,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
 
     flags:
 
-	PR_SVE_SET_VL_INHERIT
+	PR_SVE_VL_INHERIT
 
 	    Inherit the current vector length across execve().  Otherwise, the
 	    vector length is reset to the system default at execve().  (See
@@ -247,7 +247,7 @@ prctl(PR_SVE_GET_VL)
 
     The following flag may be OR-ed into the result:
 
-	PR_SVE_SET_VL_INHERIT
+	PR_SVE_VL_INHERIT
 
 	    Vector length will be inherited across execve().
 
@@ -393,7 +393,7 @@ The regset data starts with struct user_sve_header, containing:
 * At every execve() call, the new vector length of the new process is set to
   the system default vector length, unless
 
-    * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
+    * PR_SVE_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
       calling thread, or
 
     * a deferred vector length change is pending, established via the

diff --git a/Documentation/bpf/prog_cgroup_sockopt.rst b/Documentation/bpf/prog_cgroup_sockopt.rst
@@ -86,6 +86,20 @@ then the next program in the chain (A) will see those changes,
 *not* the original input ``setsockopt`` arguments. The potentially
 modified values will be then passed down to the kernel.
 
+Large optval
+============
+When the ``optval`` is greater than the ``PAGE_SIZE``, the BPF program
+can access only the first ``PAGE_SIZE`` of that data. So it has to options:
+
+* Set ``optlen`` to zero, which indicates that the kernel should
+  use the original buffer from the userspace. Any modifications
+  done by the BPF program to the ``optval`` are ignored.
+* Set ``optlen`` to the value less than ``PAGE_SIZE``, which
+  indicates that the kernel should use BPF's trimmed ``optval``.
+
+When the BPF program returns with the ``optlen`` greater than
+``PAGE_SIZE``, the userspace will receive ``EFAULT`` errno.
+
 Example
 =======
 

diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst
@@ -33,7 +33,7 @@ all combinations of get*(), pin*(), FOLL_LONGTERM, and more. Also, the
 pin_user_pages*() APIs are clearly distinct from the get_user_pages*() APIs, so
 that's a natural dividing line, and a good point to make separate wrapper calls.
 In other words, use pin_user_pages*() for DMA-pinned pages, and
-get_user_pages*() for other cases. There are four cases described later on in
+get_user_pages*() for other cases. There are five cases described later on in
 this document, to further clarify that concept.
 
 FOLL_PIN and FOLL_GET are mutually exclusive for a given gup call. However,

diff --git a/Documentation/dev-tools/kcsan.rst b/Documentation/dev-tools/kcsan.rst
@@ -114,12 +114,6 @@ the below options are available:
   To dynamically limit for which functions to generate reports, see the
   `DebugFS interface`_ blacklist/whitelist feature.
 
-  For ``__always_inline`` functions, replace ``__always_inline`` with
-  ``__no_kcsan_or_inline`` (which implies ``__always_inline``)::
-
-    static __no_kcsan_or_inline void foo(void) {
-        ...
-
 * To disable data race detection for a particular compilation unit, add to the
   ``Makefile``::
 

diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
@@ -61,3 +61,43 @@ test, or an end-to-end test.
   kernel by installing a production configuration of the kernel on production
   hardware with a production userspace and then trying to exercise some behavior
   that depends on interactions between the hardware, the kernel, and userspace.
+
+KUnit isn't working, what should I do?
+======================================
+
+Unfortunately, there are a number of things which can break, but here are some
+things to try.
+
+1. Try running ``./tools/testing/kunit/kunit.py run`` with the ``--raw_output``
+   parameter. This might show details or error messages hidden by the kunit_tool
+   parser.
+2. Instead of running ``kunit.py run``, try running ``kunit.py config``,
+   ``kunit.py build``, and ``kunit.py exec`` independently. This can help track
+   down where an issue is occurring. (If you think the parser is at fault, you
+   can run it manually against stdin or a file with ``kunit.py parse``.)
+3. Running the UML kernel directly can often reveal issues or error messages
+   kunit_tool ignores. This should be as simple as running ``./vmlinux`` after
+   building the UML kernel (e.g., by using ``kunit.py build``). Note that UML
+   has some unusual requirements (such as the host having a tmpfs filesystem
+   mounted), and has had issues in the past when built statically and the host
+   has KASLR enabled. (On older host kernels, you may need to run ``setarch
+   `uname -m` -R ./vmlinux`` to disable KASLR.)
+4. Make sure the kernel .config has ``CONFIG_KUNIT=y`` and at least one test
+   (e.g. ``CONFIG_KUNIT_EXAMPLE_TEST=y``). kunit_tool will keep its .config
+   around, so you can see what config was used after running ``kunit.py run``.
+   It also preserves any config changes you might make, so you can
+   enable/disable things with ``make ARCH=um menuconfig`` or similar, and then
+   re-run kunit_tool.
+5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
+   may help clean up any residual config items which could be causing problems.
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+   built into any kernel, or can be built as a module and loaded at runtime.
+   Doing so should allow you to determine if UML is causing the issue you're
+   seeing. When tests are built-in, they will execute when the kernel boots, and
+   modules will automatically execute associated tests when loaded. Test results
+   can be collected from ``/sys/kernel/debug/kunit/<test suite>/results``, and
+   can be parsed with ``kunit.py parse``. For more details, see "KUnit on
+   non-UML architectures" in :doc:`usage`.
+
+If none of the above tricks help, you are always welcome to email any issues to
+kunit-dev@googlegroups.com.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
@@ -2,7 +2,6 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
-DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 DT_SCHEMA_MIN_VERSION = 2020.5
 
@@ -35,21 +34,40 @@ quiet_cmd_mk_schema = SCHEMA  $@
 
 DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
-DT_SCHEMA_FILES ?= $(DT_DOCS)
-
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
-extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
-
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
-	-Wno-graph_child_address
+	-Wno-graph_child_address \
+	-Wno-interrupt_provider
 
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
+ifeq ($(DT_SCHEMA_FILES),)
+
+# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
+# Just copy processed-schema-examples.yaml
+
+$(obj)/processed-schema.yaml: $(obj)/processed-schema-examples.yaml FORCE
+	$(call if_changed,copy)
+
+DT_SCHEMA_FILES = $(DT_DOCS)
+
+else
+
+# If DT_SCHEMA_FILES is specified, use it for processed-schema.yaml
+
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
 	$(call if_changed,mk_schema)
 
-extra-y += processed-schema.yaml
+endif
+
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+extra-$(CHECK_DT_BINDING) += processed-schema-examples.yaml
+extra-$(CHECK_DTBS) += processed-schema.yaml
+
+# Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
+# build artifacts here before they are processed by scripts/Makefile.clean
+clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
+			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -47,7 +47,7 @@ Required properties:
 			  &lsio_mu1 1 2
 			  &lsio_mu1 1 3
 			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
 		for detailed mailbox binding.
 
 Note: Each mu which supports general interrupt should have an alias correctly

diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -80,14 +80,14 @@ examples:
         ranges = <1 0x00000000 0x42000000 0x02000000>,
                  <5 0x00000000 0x46000000 0x01000000>;
 
-        ethernet@1,01f00000 {
+        ethernet@1,1f00000 {
             compatible = "smsc,lan9115";
             reg = <1 0x01f00000 0x1000>;
             interrupts = <0 48 4>;
             phy-mode = "mii";
         };
 
-        uart@5,00200000 {
+        serial@5,200000 {
             compatible = "ns16550a";
             reg = <5 0x00200000 0x20>;
             interrupts = <0 49 4>;

diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX27
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock

diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX31
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock

diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Clock bindings for Freescale i.MX5
 
 maintainers:
-  - Fabio Estevam <fabio.estevam@freescale.com>
+  - Fabio Estevam <fabio.estevam@nxp.com>
 
 description: |
   The clock consumer should specify the desired clock by having the clock

diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -37,7 +37,7 @@ Optional properties:
 	simple-card or audio-graph-card binding. See their binding
 	documents on how to describe the way the sii902x device is
 	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.txt
+	Documentation/devicetree/bindings/sound/simple-card.yaml
 	Documentation/devicetree/bindings/sound/audio-graph-card.txt
 	Note: In case of the audio-graph-card binding the used port
 	index should be 3.

diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -68,7 +68,7 @@ Required properties:
   datasheet
 - clocks : phandle to the PRE axi clock input, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "axi"
 - interrupts: should contain the PRE interrupt
 - fsl,iram: phandle pointing to the mmio-sram device node, that should be
@@ -94,7 +94,7 @@ Required properties:
   datasheet
 - clocks : phandles to the PRG ipg and axi clock inputs, as described
   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 - clock-names: should be "ipg" and "axi"
 - fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
   PRE as the first entry and the muxable PREs following.

diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -30,8 +30,8 @@ Required properties:
                 "di2_sel" - IPU2 DI0 mux
                 "di3_sel" - IPU2 DI1 mux
         The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.txt, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.txt.
+        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
 
 Optional properties:
  - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q