scsi: mpi3mr: HDB allocation and posting for hardware and firmware bu…

…ffers

To be able to debug controller problems it is beneficial to allocate and
configure system/host memory buffers which can be used to capture hardware
and firmware diagnostic information.

Add functions required to allocate and post firmware and hardware
diagnostic buffers to the controller and to set up automatic diagnostic
capture triggers.

Captures will be triggered under the following circumstances:

 1. Firmware is in FAULT state.

 2. Admin commands time out.

 3. Controller reset caused due to I/O timeout

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405151758.7xrJz6rp-lkp@intel.com/
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240626102646.14298-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/mpi3mr/mpi/mpi30_tool.h

@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  Copyright 2016-2024 Broadcom Inc. All rights reserved.
+ */
+#ifndef MPI30_TOOL_H
+#define MPI30_TOOL_H     1
+
+#define MPI3_DIAG_BUFFER_TYPE_TRACE	(0x01)
+#define MPI3_DIAG_BUFFER_TYPE_FW	(0x02)
+#define MPI3_DIAG_BUFFER_ACTION_RELEASE	(0x01)
+
+struct mpi3_diag_buffer_post_request {
+	__le16                     host_tag;
+	u8                         ioc_use_only02;
+	u8                         function;
+	__le16                     ioc_use_only04;
+	u8                         ioc_use_only06;
+	u8                         msg_flags;
+	__le16                     change_count;
+	__le16                     reserved0a;
+	u8                         type;
+	u8                         reserved0d;
+	__le16                     reserved0e;
+	__le64                     address;
+	__le32                     length;
+	__le32                     reserved1c;
+};
+
+struct mpi3_diag_buffer_manage_request {
+	__le16                     host_tag;
+	u8                         ioc_use_only02;
+	u8                         function;
+	__le16                     ioc_use_only04;
+	u8                         ioc_use_only06;
+	u8                         msg_flags;
+	__le16                     change_count;
+	__le16                     reserved0a;
+	u8                         type;
+	u8                         action;
+	__le16                     reserved0e;
+};
+
+
+#endif

drivers/scsi/mpi3mr/mpi3mr.h

@@ -47,6 +47,7 @@
 #include "mpi/mpi30_ioc.h"
 #include "mpi/mpi30_sas.h"
 #include "mpi/mpi30_pci.h"
+#include "mpi/mpi30_tool.h"
 #include "mpi3mr_debug.h"
 
 /* Global list and lock for storing multiple adapters managed by the driver */
@@ -187,6 +188,13 @@ extern atomic64_t event_counter;
 #define MPI3MR_HARD_SECURE_DEVICE		0x08
 #define MPI3MR_TAMPERED_DEVICE			0x0C
 
+#define MPI3MR_DEFAULT_HDB_MAX_SZ       (4 * 1024 * 1024)
+#define MPI3MR_DEFAULT_HDB_DEC_SZ       (1 * 1024 * 1024)
+#define MPI3MR_DEFAULT_HDB_MIN_SZ       (2 * 1024 * 1024)
+#define MPI3MR_MAX_NUM_HDB      2
+
+#define MPI3MR_HDB_TRIGGER_TYPE_GLOBAL          3
+
 /* SGE Flag definition */
 #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \
 	(MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \
@@ -210,6 +218,7 @@ extern atomic64_t event_counter;
 #define MPI3MR_WRITE_SAME_MAX_LEN_256_BLKS 256
 #define MPI3MR_WRITE_SAME_MAX_LEN_2048_BLKS 2048
 
+
 /**
  * struct mpi3mr_nvme_pt_sge -  Structure to store SGEs for NVMe
  * Encapsulated commands.
@@ -289,6 +298,8 @@ enum mpi3mr_reset_reason {
 	MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22,
 	MPI3MR_RESET_FROM_SYSFS = 23,
 	MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24,
+	MPI3MR_RESET_FROM_DIAG_BUFFER_POST_TIMEOUT = 25,
+	MPI3MR_RESET_FROM_DIAG_BUFFER_RELEASE_TIMEOUT = 26,
 	MPI3MR_RESET_FROM_FIRMWARE = 27,
 	MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29,
 	MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30,
@@ -327,6 +338,9 @@ struct mpi3mr_ioc_facts {
 	u32 ioc_capabilities;
 	struct mpi3mr_compimg_ver fw_ver;
 	u32 mpi_version;
+	u32 diag_trace_sz;
+	u32 diag_fw_sz;
+	u32 diag_drvr_sz;
 	u16 max_reqs;
 	u16 product_id;
 	u16 op_req_sz;
@@ -852,6 +866,41 @@ struct mpi3mr_drv_cmd {
 	    struct mpi3mr_drv_cmd *drv_cmd);
 };
 
+/**
+ * union mpi3mr_trigger_data - Trigger data information
+ * @fault: Fault code
+ * @global: Global trigger data
+ * @element: element trigger data
+ */
+union mpi3mr_trigger_data {
+	u16 fault;
+	u64 global;
+	union mpi3_driver2_trigger_element element;
+};
+
+/**
+ * struct diag_buffer_desc - memory descriptor structure to
+ * store virtual, dma addresses, size, buffer status for host
+ * diagnostic buffers.
+ *
+ * @type: Buffer type
+ * @trigger_data: Trigger data
+ * @trigger_type: Trigger type
+ * @status: Buffer status
+ * @size: Buffer size
+ * @addr: Virtual address
+ * @dma_addr: Buffer DMA address
+ */
+struct diag_buffer_desc {
+	u8 type;
+	union mpi3mr_trigger_data trigger_data;
+	u8 trigger_type;
+	u8 status;
+	u32 size;
+	void *addr;
+	dma_addr_t dma_addr;
+};
+
 /**
  * struct dma_memory_desc - memory descriptor structure to store
  * virtual address, dma address and size for any generic dma
@@ -1054,6 +1103,11 @@ struct scmd_priv {
  * @sas_node_lock: Lock to protect SAS node list
  * @hba_port_table_list: List of HBA Ports
  * @enclosure_list: List of Enclosure objects
+ * @diag_buffers: Host diagnostic buffers
+ * @driver_pg2:  Driver page 2 pointer
+ * @reply_trigger_present: Reply trigger present flag
+ * @event_trigger_present: Event trigger present flag
+ * @scsisense_trigger_present: Scsi sense trigger present flag
  * @ioctl_dma_pool: DMA pool for IOCTL data buffers
  * @ioctl_sge: DMA buffer descriptors for IOCTL data
  * @ioctl_chain_sge: DMA buffer descriptor for IOCTL chain
@@ -1250,6 +1304,12 @@ struct mpi3mr_ioc {
 	struct dma_memory_desc ioctl_chain_sge;
 	struct dma_memory_desc ioctl_resp_sge;
 	bool ioctl_sges_allocated;
+	bool reply_trigger_present;
+	bool event_trigger_present;
+	bool scsisense_trigger_present;
+	struct diag_buffer_desc diag_buffers[MPI3MR_MAX_NUM_HDB];
+	struct mpi3_driver_page2 *driver_pg2;
+	spinlock_t trigger_lock;
 };
 
 /**
@@ -1406,6 +1466,8 @@ int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc,
 	struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz);
 int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc,
 	struct mpi3_driver_page1 *driver_pg1, u16 pg_sz);
+int mpi3mr_cfg_get_driver_pg2(struct mpi3mr_ioc *mrioc,
+	struct mpi3_driver_page2 *driver_pg2, u16 pg_sz, u8 page_type);
 
 u8 mpi3mr_is_expander_device(u16 device_info);
 int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle);
@@ -1439,4 +1501,16 @@ void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc);
 int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc);
 void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc,
 	struct mpi3mr_sas_node *sas_expander);
+void mpi3mr_alloc_diag_bufs(struct mpi3mr_ioc *mrioc);
+int mpi3mr_post_diag_bufs(struct mpi3mr_ioc *mrioc);
+int mpi3mr_issue_diag_buf_release(struct mpi3mr_ioc *mrioc,
+	struct diag_buffer_desc *diag_buffer);
+void mpi3mr_release_diag_bufs(struct mpi3mr_ioc *mrioc, u8 skip_rel_action);
+void mpi3mr_set_trigger_data_in_hdb(struct diag_buffer_desc *hdb,
+	u8 type, union mpi3mr_trigger_data *trigger_data, bool force);
+int mpi3mr_refresh_trigger(struct mpi3mr_ioc *mrioc, u8 page_type);
+struct diag_buffer_desc *mpi3mr_diag_buffer_for_type(struct mpi3mr_ioc *mrioc,
+	u8 buf_type);
+int mpi3mr_issue_diag_buf_post(struct mpi3mr_ioc *mrioc,
+	struct diag_buffer_desc *diag_buffer);
 #endif /*MPI3MR_H_INCLUDED*/