Merge tag 'soc-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "The majority of these last fixes are for devicetree files. These address two important regressions for the Qualcomm SMMU and the Raspberry Pi 4 USB controller, as well as a larger number of patches fixing minor mistakes in board specific files for Rockchips, i.MX, starfive and broadcom. The non-DT changes are - A fix for an old boot regression on Renesas shmobile chips - Another boot time regression for for the Qualcomm PDR SoC driver, among a few other Qualcomm firmware driver fixes for efivars and tzmem - Minor Kconfig fixes for davinci and OMAP1 - Minor code fixes for sparx5 reset controllers, OMAP memory controller, i.MX SCU, cpufreq and SoC drivers and a Hisilicon SoC driver - One more update to the Asahi maintainers, adding Neal Gompa as a reviewer" * tag 'soc-fixes-6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: davinci: da850: fix selecting ARCH_DAVINCI_DA8XX soc: hisilicon: kunpeng_hccs: Fix incorrect string assembly memory: omap-gpmc: drop no compatible check reset: mchp: sparx5: Fix for lan966x ARM: shmobile: smp: Enforce shmobile_smp_* alignment MAINTAINERS: Add myself (Neal Gompa) as a reviewer for ARM Apple support MAINTAINERS: Add apple-spi driver & binding files arm64: dts: rockchip: slow down emmc freq for rock 5 itx ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC3200 ARM: dts: BCM5301X: Fix switch port labels of ASUS RT-AC5300 ARM: dts: bcm2711: Don't mark timer regs unconfigured ARM: OMAP1: select CONFIG_GENERIC_IRQ_CHIP arm64: dts: rockchip: Add missing PCIe supplies to RockPro64 board dtsi arm64: dts: rockchip: Add avdd HDMI supplies to RockPro64 board dtsi arm64: dts: rockchip: Remove undocumented sdmmc property from lubancat-1 arm64: dts: rockchip: fix pinmux of UART5 for PX30 Ringneck on Haikou arm64: dts: rockchip: fix pinmux of UART0 for PX30 Ringneck on Haikou arm64: dts: rockchip: fix u2phy1_host status for NanoPi R4S arm64: dts: bcm2712: PL011 UARTs are actually r1p5 ARM: dts: bcm2711: PL011 UARTs are actually r1p5 ...
mariux64 · Mar 17, 2025 · fc444ad · fc444ad
2 parents 47c7efa + 45d5fe1
commit fc444ad
Show file tree

Hide file tree

Showing 31 changed files with 119 additions and 99 deletions.
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -2213,6 +2213,7 @@ ARM/APPLE MACHINE SUPPORT
 M:	Sven Peter <sven@svenpeter.dev>
 M:	Janne Grunau <j@jannau.net>
 R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
+R:	Neal Gompa <neal@gompa.dev>
 L:	asahi@lists.linux.dev
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -2237,6 +2238,7 @@ F:	Documentation/devicetree/bindings/pci/apple,pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 F:	Documentation/devicetree/bindings/power/apple*
 F:	Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
+F:	Documentation/devicetree/bindings/spi/apple,spi.yaml
 F:	Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
 F:	arch/arm64/boot/dts/apple/
 F:	drivers/bluetooth/hci_bcm4377.c
@@ -2254,6 +2256,7 @@ F:	drivers/nvmem/apple-efuses.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
 F:	drivers/pwm/pwm-apple.c
 F:	drivers/soc/apple/*
+F:	drivers/spi/spi-apple.c
 F:	drivers/watchdog/apple_wdt.c
 F:	include/dt-bindings/interrupt-controller/apple-aic.h
 F:	include/dt-bindings/pinctrl/apple.h

diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
-#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -101,7 +100,3 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
-
-&xhci {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -134,7 +134,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -145,7 +145,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -156,7 +156,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -167,7 +167,7 @@
 			clocks = <&clocks BCM2835_CLOCK_UART>,
 				 <&clocks BCM2835_CLOCK_VPU>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 
@@ -451,8 +451,6 @@
 					  IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
 					  IRQ_TYPE_LEVEL_LOW)>;
-		/* This only applies to the ARMv7 stub */
-		arm,cpu-registers-not-fw-configured;
 	};
 
 	cpus: cpus {
@@ -610,6 +608,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
 			/* DWC2 and this IP block share the same USB PHY,
 			 * enabling both at the same time results in lockups.
 			 * So keep this node disabled and let the bootloader
@@ -1177,6 +1176,7 @@
 };
 
 &uart0 {
+	arm,primecell-periphid = <0x00341011>;
 	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 };
 

diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -124,19 +124,19 @@
 		};
 
 		port@1 {
-			label = "lan1";
+			label = "lan4";
 		};
 
 		port@2 {
-			label = "lan2";
+			label = "lan3";
 		};
 
 		port@3 {
-			label = "lan3";
+			label = "lan2";
 		};
 
 		port@4 {
-			label = "lan4";
+			label = "lan1";
 		};
 	};
 };

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -126,23 +126,23 @@
 
 	ports {
 		port@0 {
-			label = "lan4";
+			label = "wan";
 		};
 
 		port@1 {
-			label = "lan3";
+			label = "lan1";
 		};
 
 		port@2 {
 			label = "lan2";
 		};
 
 		port@3 {
-			label = "lan1";
+			label = "lan3";
 		};
 
 		port@4 {
-			label = "wan";
+			label = "lan4";
 		};
 	};
 };

diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -108,6 +108,11 @@
 		};
 	};
 
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&vgen2_reg>;
+	};
+
 	reg_module_3v3: regulator-module-3v3 {
 		compatible = "regulator-fixed";
 		regulator-always-on;
@@ -236,10 +241,6 @@
 	status = "disabled";
 };
 
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
 /* Apalis SPI1 */
 &ecspi1 {
 	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -527,7 +528,6 @@
 
 	pmic: pmic@8 {
 		compatible = "fsl,pfuze100";
-		fsl,pmic-stby-poweroff;
 		reg = <0x08>;
 
 		regulators {

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
@@ -27,6 +27,7 @@ config ARCH_DAVINCI_DA830
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
+	select ARCH_DAVINCI_DA8XX
 	select DAVINCI_CP_INTC
 
 config ARCH_DAVINCI_DA8XX

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
@@ -8,6 +8,7 @@ menuconfig ARCH_OMAP1
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select FORCE_PCI if PCCARD
+	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)

diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
@@ -136,6 +136,7 @@ ENDPROC(shmobile_smp_sleep)
 	.long	shmobile_smp_arg - 1b
 
 	.bss
+	.align	2
 	.globl	shmobile_smp_mpidr
 shmobile_smp_mpidr:
 	.space	NR_CPUS * 4

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -227,7 +227,7 @@
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_uart>, <&clk_vpu>;
 			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
+			arm,primecell-periphid = <0x00341011>;
 			status = "disabled";
 		};
 

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -16,10 +16,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -1,7 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
- * Copyright 2021-2022 TQ-Systems GmbH
- * Author: Alexander Stein <alexander.stein@tq-group.com>
+ * Copyright 2021-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Alexander Stein
  */
 
 #include "imx8mp.dtsi"
@@ -23,15 +24,6 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-always-on;
 	};
-
-	/* e-MMC IO, needed for HS modes */
-	reg_vcc1v8: regulator-vcc1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
 };
 
 &A53_0 {
@@ -197,7 +189,7 @@
 	no-sd;
 	no-sdio;
 	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc1v8>;
+	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
 

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -28,10 +28,10 @@
 			"Headphone Jack", "HPOUTR",
 			"IN2L", "Line In Jack",
 			"IN2R", "Line In Jack",
-			"Headphone Jack", "MICBIAS",
-			"IN1L", "Headphone Jack";
+			"Microphone Jack", "MICBIAS",
+			"IN1L", "Microphone Jack";
 		simple-audio-card,widgets =
-			"Microphone", "Headphone Jack",
+			"Microphone", "Microphone Jack",
 			"Headphone", "Headphone Jack",
 			"Line", "Line In Jack";
 

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -5163,7 +5163,6 @@
 				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			dma-coherent;
 		};
 
 		anoc_1_tbu: tbu@150c5000 {

diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts
@@ -194,6 +194,13 @@
 			  <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	uart {
+		uart5_rts_pin: uart5-rts-pin {
+			rockchip,pins =
+			  <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm0 {
@@ -222,10 +229,15 @@
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer>;
 	status = "okay";
 };
 
 &uart5 {
+	/* Add pinmux for rts-gpios (uart5_rts_pin) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_xfer &uart5_rts_pin>;
 	rts-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dtsi
@@ -115,7 +115,7 @@
 };
 
 &u2phy1_host {
-	status = "disabled";
+	phy-supply = <&vdd_5v>;
 };
 
 &uart0 {

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -227,6 +227,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcca_0v9: regulator-vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vdd_log: regulator-vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -312,6 +322,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vcca_0v9>;
+	avdd-1v8-supply = <&vcc1v8_dvp>;
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_cec>;
@@ -661,6 +673,8 @@
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_perst>;
+	vpcie0v9-supply = <&vcca_0v9>;
+	vpcie1v8-supply = <&vcca_1v8>;
 	vpcie12v-supply = <&vcc12v_dcin>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -512,7 +512,6 @@
 
 &sdmmc0 {
 	max-frequency = <150000000>;
-	supports-sd;
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts
@@ -503,7 +503,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
-	supports-cqe;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -690,10 +690,9 @@
 
 &sdhci {
 	bus-width = <8>;
-	max-frequency = <200000000>;
+	max-frequency = <150000000>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
-	mmc-hs200-1_8v;
 	no-sdio;
 	no-sd;
 	non-removable;

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
@@ -386,7 +386,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>;
-	supports-cqe;
 	vmmc-supply = <&vcc_3v3_s3>;
 	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";