Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix
  ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
  ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
  Change bcmring Maintainer list.
  ARM: Update mach-types
  ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
  ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7
  ARM: pxa/palm: fix ifdef around gen_nand driver registration
  ARM: pxa: fix pxa2xx-flash section mismatch
  ARM: mmp2: remove not used clk_rtc

MAINTAINERS

@@ -559,14 +559,14 @@ W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/BCMRING ARM ARCHITECTURE
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-bcmring
 
 ARM/BCMRING MTD NAND DRIVER
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained

arch/arm/Kconfig

@@ -1311,7 +1311,7 @@ config HZ
 
 config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && EXPERIMENTAL
+	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected"
 
 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on !AEABI || OABI_COMPAT
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently

arch/arm/mach-mmp/mmp2.c

@@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
 

arch/arm/mach-pxa/palmtx.c

@@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {

arch/arm/mm/cache-v6.S

@@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]			@ read for ownership
+	strb	r2, [r0]			@ write for ownership
+#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -211,24 +215,28 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrneb	r2, [r1, #-1]			@ read for ownership
+	strneb	r2, [r1, #-1]			@ write for ownership
+#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
 #else
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
 	mcr	p15, 0, r0, c7, c7, 1		@ invalidate unified line
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlo	r2, [r0]			@ read for ownership
+	strlo	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -263,19 +271,23 @@ v6_dma_clean_range:
  *	- end     - virtual end address of region
  */
 ENTRY(v6_dma_flush_range)
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
 #ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
+	ldrb	r2, [r0]		@ read for ownership
+	strb	r2, [r0]		@ write for ownership
 #endif
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
 	mcr	p15, 0, r0, c7, c15, 1		@ clean & invalidate line
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlob	r2, [r0]			@ read for ownership
+	strlob	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer

arch/arm/mm/cache-v7.S

@@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range)
  UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
-	bic	r0, r0, r3
+	bic	r12, r0, r3
 1:
- USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
+ USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	1b
 	dsb
- USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
-	add	r0, r0, r2
+	icache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
 2:
-	cmp	r0, r1
-	blo	1b
+ USER(	mcr	p15, 0, r12, c7, c5, 1	)	@ invalidate I line
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	2b
+3:
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
@@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, just try the next page.
  */
 9001:
-	mov	r0, r0, lsr #12
-	mov	r0, r0, lsl #12
-	add	r0, r0, #4096
-	b	2b
+	mov	r12, r12, lsr #12
+	mov	r12, r12, lsl #12
+	add	r12, r12, #4096
+	b	3b
  UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)

arch/arm/mm/proc-macros.S

@@ -61,17 +61,27 @@
 	.endm
 
 /*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
  */
 	.macro	dcache_line_size, reg, tmp
-	mrc	p15, 1, \tmp, c0, c0, 0		@ read CSIDR
-	and	\tmp, \tmp, #7			@ cache line size encoding
-	mov	\reg, #16			@ size offset
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	lsr	\tmp, \tmp, #16
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 	.endm
 
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+	.macro	icache_line_size, reg, tmp
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
+	mov	\reg, \reg, lsl \tmp		@ actual cache line size
+	.endm
 
 /*
  * Sanity check the PTE configuration for the code below - which makes