Skip to content

Commit

Permalink
Merge tag 'renesas-soc-for-v3.12' of git://git.kernel.org/pub/scm/lin…
Browse files Browse the repository at this point in the history 
…ux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas ARM based SoC updates for v3.12

* Setup arch timer based on MD pins on r8a7790 SoC
* Thermal driver support for r8a7790 SoC
* Make arch timer optional for r8a7790 and r8a73a4 SoCs
* CMT10 clock event for r8a7790 and r8a73a4 SoCs
* Increased clock coverage for r8a73a4 SoC
* MMCIF DMA definitions for r8a7740 SoC
* Disconnect SMP code from clocks on emev2 SoC

* tag 'renesas-soc-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (49 commits)
  ARM: shmobile: Setup r8a7790 arch timer based on MD pins
  ARM: shmobile: Introduce r8a7790_read_mode_pins()
  ARM: shmobile: r8a7740: add MMCIF DMA definitions
  ARM: shmobile: Disconnect EMEV2 SMP code from clocks
  ARM: shmobile: Make r8a73a4 Arch timer optional
  ARM: shmobile: Add r8a73a4 CMT10 clock event
  ARM: shmobile: Make r8a7790 Arch timer optional
  ARM: shmobile: Add r8a7790 CMT00 clock event
  ARM: shmobile: Sort r8a7790 MSTP entries
  ARM: shmobile: r8a73a4: add clocks for I2C controllers
  ARM: shmobile: r8a73a4: add Z2 clock support
  ARM: shmobile: r8a73a4: safeguard against wrong clk_set_rate() uses
  ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq
  ARM: shmobile: r8a73a4: wait for completion when kicking the clock
  ARM: shmobile: r8a7790: add thermal driver support
  ARM: shmobile: r8a7790: add clocks for thermal
  ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference
  ARM: shmobile: KZM9D DT reference implementation
  ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates
  ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
  • Loading branch information
Olof Johansson committed Aug 14, 2013
2 parents e1c0e1a + 81b9d53 commit fc5d462
Show file tree
Hide file tree
Showing 34 changed files with 851 additions and 501 deletions.
1 change: 1 addition & 0 deletions arch/arm/boot/dts/Makefile
View file
Original file line number Diff line number Diff line change
Expand Up @@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
emev2-kzm9d-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7740-armadillo800eva-reference.dtb \
Expand Down
57 changes: 57 additions & 0 deletions arch/arm/boot/dts/emev2-kzm9d-reference.dts
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,57 @@
/*
* Device Tree Source for the KZM9D board
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;

/include/ "emev2.dtsi"

/ {
model = "EMEV2 KZM9D Board";
compatible = "renesas,kzm9d-reference", "renesas,emev2";

memory {
device_type = "memory";
reg = <0x40000000 0x8000000>;
};

chosen {
bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};

reg_1p8v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};

reg_3p3v: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};

lan9220@20000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x20000000 0x10000>;
phy-mode = "mii";
interrupt-parent = <&gpio0>;
interrupts = <1 1>; /* active high */
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vddvario-supply = <&reg_1p8v>;
vdd33a-supply = <&reg_3p3v>;
};
};
2 changes: 1 addition & 1 deletion arch/arm/boot/dts/emev2-kzm9d.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -21,6 +21,6 @@
};

chosen {
bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
};
59 changes: 59 additions & 0 deletions arch/arm/boot/dts/emev2.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,6 +14,14 @@
compatible = "renesas,emev2";
interrupt-parent = <&gic>;

aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
gpio4 = &gpio4;
};

cpus {
#address-cells = <1>;
#size-cells = <0>;
Expand Down Expand Up @@ -67,4 +75,55 @@
reg = <0xe1050000 0x38>;
interrupts = <0 11 0>;
};

gpio0: gpio@e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
interrupts = <0 67 0>, <0 68 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
interrupts = <0 69 0>, <0 70 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
interrupts = <0 71 0>, <0 72 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
interrupts = <0 73 0>, <0 74 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
interrupts = <0 75 0>, <0 76 0>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <31>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
22 changes: 22 additions & 0 deletions arch/arm/boot/dts/r8a73a4-ape6evm.dts
View file
Original file line number Diff line number Diff line change
Expand Up @@ -50,3 +50,25 @@
};
};
};

&i2c5 {
vdd_dvfs: max8973@1b {
compatible = "maxim,max8973";
reg = <0x1b>;

regulator-min-microvolt = <935000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
};

&cpu0 {
cpu0-supply = <&vdd_dvfs>;
operating-points = <
/* kHz uV */
1950000 1115000
1462500 995000
>;
voltage-tolerance = <1>; /* 1% */
};
126 changes: 126 additions & 0 deletions arch/arm/boot/dts/r8a73a4.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -85,4 +85,130 @@
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};

i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 174 0x4>;
};

i2c1: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 175 0x4>;
};

i2c2: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 176 0x4>;
};

i2c3: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 177 0x4>;
};

i2c4: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 178 0x4>;
};

i2c5: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 179 0x4>;
};

i2c6: i2c@e6550000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 184 0x4>;
};

i2c7: i2c@e6560000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 185 0x4>;
};

i2c8: i2c@e6570000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupt-parent = <&gic>;
interrupts = <0 173 0x4>;
};

mmcif0: mmcif@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 169 0x4>;
reg-io-width = <4>;
status = "disabled";
};

mmcif1: mmcif@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 170 0x4>;
reg-io-width = <4>;
status = "disabled";
};

sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a73a4-sdhi";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
cap-sd-highspeed;
status = "disabled";
};

sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a73a4-sdhi";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
cap-sd-highspeed;
status = "disabled";
};

sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a73a4-sdhi";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
cap-sd-highspeed;
status = "disabled";
};
};
54 changes: 54 additions & 0 deletions arch/arm/boot/dts/r8a7790.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -54,4 +54,58 @@
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};

mmcif0: mmcif@ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 169 0x4>;
reg-io-width = <4>;
status = "disabled";
};

mmcif1: mmcif@ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
interrupt-parent = <&gic>;
interrupts = <0 170 0x4>;
reg-io-width = <4>;
status = "disabled";
};

sdhi0: sdhi@ee100000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee100000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 165 4>;
cap-sd-highspeed;
status = "disabled";
};

sdhi1: sdhi@ee120000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee120000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 166 4>;
cap-sd-highspeed;
status = "disabled";
};

sdhi2: sdhi@ee140000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee140000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 167 4>;
cap-sd-highspeed;
status = "disabled";
};

sdhi3: sdhi@ee160000 {
compatible = "renesas,r8a7790-sdhi";
reg = <0 0xee160000 0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 168 4>;
cap-sd-highspeed;
status = "disabled";
};
};
16 changes: 14 additions & 2 deletions arch/arm/mach-shmobile/Kconfig
View file
Original file line number Diff line number Diff line change
Expand Up @@ -23,9 +23,10 @@ config ARCH_R8A73A4
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP

config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
Expand Down Expand Up @@ -59,7 +60,6 @@ config ARCH_R8A7790
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select HAVE_ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC

Expand Down Expand Up @@ -156,6 +156,18 @@ config MACH_KZM9D
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF

config MACH_KZM9D_REFERENCE
bool "KZM9D board - Reference Device Tree Implementation"
depends on ARCH_EMEV2
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
---help---
Use reference implementation of KZM9D board support
which makes a greater use of device tree at the expense
of not supporting a number of devices.

This is intended to aid developers

config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
Expand Down
Loading

0 comments on commit fc5d462

Please sign in to comment.