Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ata: add CFA specific identify data words
  remove stale comment from <linux/hdreg.h>
  AT91: initialize Compact Flash on AT91SAM9263 cpu
  ide: add at91_ide driver
  ide: allow to wrap interrupt handler
  ide-iops: fix odd-length ATAPI PIO transfers
  ide: NULL noise: drivers/ide/ide-*.c
  ide: expiry() returns int, negative expiry() return values won't be noticed

arch/arm/mach-at91/at91sam9263_devices.c

@@ -347,6 +347,111 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned long ebi0_csa;
+	struct platform_device *pdev;
+
+	if (!data)
+		return;
+
+	/*
+	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
+	 * we assume SMC timings are configured by board code,
+	 * except True IDE where timings are controlled by driver
+	 */
+	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	switch (data->chipselect) {
+	case 4:
+		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->vcc_pin)
+		/* initially off */
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* enable EBI controlled pins */
+	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia

arch/arm/mach-at91/include/mach/board.h

@@ -56,6 +56,9 @@ struct at91_cf_data {
 	u8	vcc_pin;		/* power switching */
 	u8	rst_pin;		/* card reset */
 	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 

drivers/ide/Kconfig

@@ -721,6 +721,11 @@ config BLK_DEV_IDE_TX4939
 	depends on SOC_TX4939
 	select BLK_DEV_IDEDMA_SFF
 
+config BLK_DEV_IDE_AT91
+	tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+	depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+	select IDE_TIMINGS
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_RPC || ARCH_SHARK)

drivers/ide/Makefile

@@ -116,3 +116,4 @@ obj-$(CONFIG_BLK_DEV_IDE_AU1XXX)	+= au1xxx-ide.o
 
 obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
 obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91)		+= at91_ide.o