Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-06-24

This series contains updates to i40e driver only.

Dinghao Liu corrects error handling for failed i40e_vsi_request_irq()
call.

Mateusz allows for disabling of autonegotiation for all BaseT media.

Jesse corrects the multiplier being used on 5Gb speeds for PTP.

Jan adds locking in paths calling i40e_setup_pf_switch() that were
missing it.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -1262,8 +1262,7 @@ static int i40e_set_link_ksettings(struct net_device *netdev,
 			if (ethtool_link_ksettings_test_link_mode(&safe_ks,
 								  supported,
 								  Autoneg) &&
-			    hw->phy.link_info.phy_type !=
-			    I40E_PHY_TYPE_10GBASE_T) {
+			    hw->phy.media_type != I40E_MEDIA_TYPE_BASET) {
 				netdev_info(netdev, "Autoneg cannot be disabled on this phy\n");
 				err = -EINVAL;
 				goto done;

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -32,7 +32,7 @@ static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi);
 static void i40e_handle_reset_warning(struct i40e_pf *pf, bool lock_acquired);
 static int i40e_add_vsi(struct i40e_vsi *vsi);
 static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi);
-static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit);
+static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit, bool lock_acquired);
 static int i40e_setup_misc_vector(struct i40e_pf *pf);
 static void i40e_determine_queue_usage(struct i40e_pf *pf);
 static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
@@ -8703,6 +8703,8 @@ int i40e_vsi_open(struct i40e_vsi *vsi)
 			 dev_driver_string(&pf->pdev->dev),
 			 dev_name(&pf->pdev->dev));
 		err = i40e_vsi_request_irq(vsi, int_name);
+		if (err)
+			goto err_setup_rx;
 
 	} else {
 		err = -EINVAL;
@@ -10569,7 +10571,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 #endif /* CONFIG_I40E_DCB */
 	if (!lock_acquired)
 		rtnl_lock();
-	ret = i40e_setup_pf_switch(pf, reinit);
+	ret = i40e_setup_pf_switch(pf, reinit, true);
 	if (ret)
 		goto end_unlock;
 
@@ -14627,10 +14629,11 @@ int i40e_fetch_switch_configuration(struct i40e_pf *pf, bool printconfig)
  * i40e_setup_pf_switch - Setup the HW switch on startup or after reset
  * @pf: board private structure
  * @reinit: if the Main VSI needs to re-initialized.
+ * @lock_acquired: indicates whether or not the lock has been acquired
  *
  * Returns 0 on success, negative value on failure
  **/
-static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
+static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 {
 	u16 flags = 0;
 	int ret;
@@ -14732,9 +14735,15 @@ static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
 
 	i40e_ptp_init(pf);
 
+	if (!lock_acquired)
+		rtnl_lock();
+
 	/* repopulate tunnel port filters */
 	udp_tunnel_nic_reset_ntf(pf->vsi[pf->lan_vsi]->netdev);
 
+	if (!lock_acquired)
+		rtnl_unlock();
+
 	return ret;
 }
 
@@ -15528,7 +15537,7 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
 	}
 #endif
-	err = i40e_setup_pf_switch(pf, false);
+	err = i40e_setup_pf_switch(pf, false, false);
 	if (err) {
 		dev_info(&pdev->dev, "setup_pf_switch failed: %d\n", err);
 		goto err_vsis;

drivers/net/ethernet/intel/i40e/i40e_ptp.c

@@ -11,13 +11,14 @@
  * operate with the nanosecond field directly without fear of overflow.
  *
  * Much like the 82599, the update period is dependent upon the link speed:
- * At 40Gb link or no link, the period is 1.6ns.
- * At 10Gb link, the period is multiplied by 2. (3.2ns)
+ * At 40Gb, 25Gb, or no link, the period is 1.6ns.
+ * At 10Gb or 5Gb link, the period is multiplied by 2. (3.2ns)
  * At 1Gb link, the period is multiplied by 20. (32ns)
  * 1588 functionality is not supported at 100Mbps.
  */
 #define I40E_PTP_40GB_INCVAL		0x0199999999ULL
 #define I40E_PTP_10GB_INCVAL_MULT	2
+#define I40E_PTP_5GB_INCVAL_MULT	2
 #define I40E_PTP_1GB_INCVAL_MULT	20
 
 #define I40E_PRTTSYN_CTL1_TSYNTYPE_V1  BIT(I40E_PRTTSYN_CTL1_TSYNTYPE_SHIFT)
@@ -465,6 +466,9 @@ void i40e_ptp_set_increment(struct i40e_pf *pf)
 	case I40E_LINK_SPEED_10GB:
 		mult = I40E_PTP_10GB_INCVAL_MULT;
 		break;
+	case I40E_LINK_SPEED_5GB:
+		mult = I40E_PTP_5GB_INCVAL_MULT;
+		break;
 	case I40E_LINK_SPEED_1GB:
 		mult = I40E_PTP_1GB_INCVAL_MULT;
 		break;