Merge tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kern…

…el/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "It is pretty calm and chill in pin control for the moment. Just
  incremental development.

  There is an odd patch to the Super-H architecture, it's coming from
  the maintainers so should be fine.

  Summary:

  New drivers:
   - Bitmain BM1880 pin controller
   - Mediatek MT8516
   - Cirrus Logich Lochnagar PMIC pins

  Updates:
   - Incremental development on Renesas SH-PFC
   - Incremental development on Intel pin controller and some particular
     updates for Cedarfork.
   - Pin configuration support in Allwinner SunXi drivers
   - Suspend/resume support in the NXP/Freescale i.MX8MQ driver
   - Support for more packaging of the ST Micro STM32"

* tag 'pinctrl-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: mcp23s08: Do not complain about unsupported params
  pinctrl: Rework Kconfig dependency for BM1880 pinctrl driver
  MAINTAINERS: Add entry for BM1880 pinctrl
  pinctrl: Add pinctrl support for BM1880 SoC
  dt-bindings: pinctrl: Add BM1880 pinctrl binding
  pinctrl: stm32: check irq controller availability at probe
  pinctrl: mediatek: Add MT8516 Pinctrl driver
  pinctrl: zte: fix leaked of_node references
  pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()
  pinctrl: intel: Retain HOSTSW_OWN for requested gpio pin
  pinctrl: pistachio: fix leaked of_node references
  pinctrl: sunxi: Support I/O bias voltage setting on H6
  pinctrl: sunxi: Prepare for alternative bias voltage setting methods
  pinctrl: st: fix leaked of_node references
  pinctrl: samsung: fix leaked of_node references
  pinctrl: stm32: align stm32mp157 pin names
  pinctrl: stm32: add package information for stm32mp157c
  pinctrl: stm32: introduce package support
  dt-bindings: pinctrl: stm32: add new entry for package information
  pinctrl: imx8mq: Add suspend/resume ops
  ...

Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt

@@ -0,0 +1,98 @@
+Bitmain BM1880 Pin Controller
+
+This binding describes the pin controller found in the BM1880 SoC.
+
+Required Properties:
+
+- compatible:   Should be "bitmain,bm1880-pinctrl"
+- reg:          Offset and length of pinctrl space in SCTRL.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration for BM1880 SoC
+includes only pinmux as there is no pinconf support available in SoC.
+
+Each configuration node can consist of multiple nodes describing the pinmux
+options. The name of each subnode is not important; all subnodes should be
+enumerated and processed purely based on their content.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+
+Required Properties:
+
+- pins:           An array of strings, each string containing the name of a pin.
+                  Valid values for pins are:
+
+                  MIO0 - MIO111
+
+- groups:         An array of strings, each string containing the name of a pin
+                  group. Valid values for groups are:
+
+                  nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp,
+                  pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp,
+                  pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp,
+                  pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp,
+                  pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp,
+                  pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp,
+                  pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp,
+                  pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp,
+                  i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp,
+                  uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp,
+                  uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp,
+                  uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp,
+                  gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp,
+                  gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp,
+                  gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp,
+                  gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp,
+                  gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp,
+                  gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp,
+                  gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp,
+                  gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp,
+                  gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp,
+                  gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp,
+                  gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp,
+                  gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp,
+                  gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp,
+                  gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp,
+                  i2s1_grp, i2s1_mclkin_grp, spi0_grp
+
+- function:       An array of strings, each string containing the name of the
+                  pinmux functions. The following are the list of pinmux
+                  functions available:
+
+                  nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
+                  pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13,
+                  pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22,
+                  pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31,
+                  pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3,
+                  i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7,
+                  uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15,
+                  gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8,
+                  gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16,
+                  gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
+                  gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+                  gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+                  gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44,
+                  gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51,
+                  gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58,
+                  gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65,
+                  gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin,
+                  spi0
+
+Example:
+        pinctrl: pinctrl@50 {
+                compatible = "bitmain,bm1880-pinctrl";
+                reg = <0x50 0x4B0>;
+
+                pinctrl_uart0_default: uart0-default {
+                        pinmux {
+                                groups = "uart0_grp";
+                                function = "uart0";
+                        };
+                };
+        };

Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt

@@ -0,0 +1,141 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the pinctrl portion
+of the driver.
+
+Also see these documents for generic binding information:
+  [1] GPIO : ../gpio/gpio.txt
+  [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+And these for relevant defines:
+  [3] include/dt-bindings/pinctrl/lochnagar.h
+
+This binding must be part of the Lochnagar MFD binding:
+  [4] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar-pinctrl"
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+  - #gpio-cells : Must be 2. The first cell is the pin number, see
+    [3] for available pins and the second cell is used to specify
+    optional parameters, see [1].
+  - gpio-ranges : Range of pins managed by the GPIO controller, see
+    [1]. Both the GPIO and Pinctrl base should be set to zero and the
+    count to the appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define,
+    see [3].
+
+  - pinctrl-names : A pinctrl state named "default" must be defined.
+  - pinctrl-0 : A phandle to the default pinctrl state.
+
+Required sub-nodes:
+
+The pin configurations are defined as a child of the pinctrl states
+node, see [2]. Each sub-node can have the following properties:
+  - groups : A list of groups to select (either this or "pins" must be
+    specified), available groups:
+      codec-aif1, codec-aif2, codec-aif3, dsp-aif1, dsp-aif2, psia1,
+      psia2, gf-aif1, gf-aif2, gf-aif3, gf-aif4, spdif-aif, usb-aif1,
+      usb-aif2, adat-aif, soundcard-aif
+  - pins : A list of pin names to select (either this or "groups" must
+    be specified), available pins:
+      fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
+      fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
+      codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
+      dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
+      gf-gpio3, gf-gpio7, codec-aif1-bclk, codec-aif1-rxdat,
+      codec-aif1-lrclk, codec-aif1-txdat, codec-aif2-bclk,
+      codec-aif2-rxdat, codec-aif2-lrclk, codec-aif2-txdat,
+      codec-aif3-bclk, codec-aif3-rxdat, codec-aif3-lrclk,
+      codec-aif3-txdat, dsp-aif1-bclk, dsp-aif1-rxdat, dsp-aif1-lrclk,
+      dsp-aif1-txdat, dsp-aif2-bclk, dsp-aif2-rxdat,
+      dsp-aif2-lrclk, dsp-aif2-txdat, psia1-bclk, psia1-rxdat,
+      psia1-lrclk, psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+      psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat, gf-aif3-lrclk,
+      gf-aif3-txdat, gf-aif4-bclk, gf-aif4-rxdat, gf-aif4-lrclk,
+      gf-aif4-txdat, gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+      gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat, gf-aif2-lrclk,
+      gf-aif2-txdat, dsp-uart1-rx, dsp-uart1-tx, dsp-uart2-rx,
+      dsp-uart2-tx, gf-uart2-rx, gf-uart2-tx, usb-uart-rx,
+      codec-pdmclk1, codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+      codec-dmicclk1, codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+      codec-dmicclk3, codec-dmicdat3, codec-dmicclk4, codec-dmicdat4,
+      dsp-dmicclk1, dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+      i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, dsp-standby,
+      codec-mclk1, codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+      gf-gpio1, gf-gpio5, dsp-gpio20, led1, led2
+  - function : The mux function to select, available functions:
+      aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4, fpga-gpio5,
+      fpga-gpio6, codec-gpio1, codec-gpio2, codec-gpio3, codec-gpio4,
+      codec-gpio5, codec-gpio6, codec-gpio7, codec-gpio8, dsp-gpio1,
+      dsp-gpio2, dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6, gf-gpio2,
+      gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5, dsp-gpio20, codec-clkout,
+      dsp-clkout, pmic-32k, spdif-clkout, clk-12m288, clk-11m2986,
+      clk-24m576, clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+      gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1, codec-mclk2,
+      dsp-clkin, psia1-mclk, psia2-mclk, spdif-mclk, codec-irq,
+      codec-reset, dsp-reset, dsp-irq, dsp-standby, codec-pdmclk1,
+      codec-pdmdat1, codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+      codec-dmicdat1, codec-dmicclk2, codec-dmicdat2, codec-dmicclk3,
+      codec-dmicdat3, codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+      dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+      dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx, gf-uart2-rx,
+      gf-uart2-tx, usb-uart-rx, usb-uart-tx, i2c2-scl, i2c2-sda,
+      i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda, spdif-aif, psia1,
+      psia1-bclk, psia1-lrclk, psia1-rxdat, psia1-txdat, psia2,
+      psia2-bclk, psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+      codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+      codec-aif1-txdat, codec-aif2, codec-aif2-bclk, codec-aif2-lrclk,
+      codec-aif2-rxdat, codec-aif2-txdat, codec-aif3, codec-aif3-bclk,
+      codec-aif3-lrclk, codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+      dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat, dsp-aif1-txdat,
+      dsp-aif2, dsp-aif2-bclk, dsp-aif2-lrclk, dsp-aif2-rxdat,
+      dsp-aif2-txdat, gf-aif3, gf-aif3-bclk, gf-aif3-lrclk,
+      gf-aif3-rxdat, gf-aif3-txdat, gf-aif4, gf-aif4-bclk,
+      gf-aif4-lrclk, gf-aif4-rxdat, gf-aif4-txdat, gf-aif1,
+      gf-aif1-bclk, gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat,
+      gf-aif2, gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+      gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif, soundcard-aif,
+
+  - output-enable : Specifies that an AIF group will be used as a master
+    interface (either this or input-enable is required if a group is
+    being muxed to an AIF)
+  - input-enable : Specifies that an AIF group will be used as a slave
+    interface (either this or output-enable is required if a group is
+    being muxed to an AIF)
+
+Example:
+
+lochnagar-pinctrl {
+	compatible = "cirrus,lochnagar-pinctrl";
+
+	gpio-controller;
+	#gpio-cells = <2>;
+	gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pin-settings>;
+
+	pin-settings: pin-settings {
+		ap-aif {
+			input-enable;
+			groups = "gf-aif1";
+			function = "codec-aif3";
+		};
+		codec-aif {
+			output-enable;
+			groups = "codec-aif3";
+			function = "gf-aif1";
+		};
+	};
+};

Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt

@@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
 PAD_CTL_SRE_SLOW                (1 << 2)
 PAD_CTL_SRE_FAST                (0 << 2)
 PAD_CTL_DSE_X1                  (0 << 0)
-PAD_CTL_DSE_X2                  (1 << 0)
-PAD_CTL_DSE_X3                  (2 << 0)
-PAD_CTL_DSE_X4                  (3 << 0)
+PAD_CTL_DSE_X4                  (1 << 0)
+PAD_CTL_DSE_X2                  (2 << 0)
+PAD_CTL_DSE_X6                  (3 << 0)
 
 Examples:
 While iomuxc-lpsr is intended to be used by dedicated peripherals to take

Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt

@@ -11,6 +11,7 @@ Required properties:
 	"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
 	"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
 	"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
+	"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
 - pins-are-numbered: Specify the subnodes are using numbered pinmux to
   specify pins.
 - gpio-controller : Marks the device node as a gpio controller.

Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt

@@ -0,0 +1,132 @@
+* Mediatek MT8183 Pin Controller
+
+The Mediatek's Pin controller is used to control SoC pins.
+
+Required properties:
+- compatible: value should be one of the following.
+	"mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl.
+- gpio-controller : Marks the device node as a gpio controller.
+- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
+  binding is used, the amount of cells must be specified as 2. See the below
+  mentioned gpio binding representation for description of particular cells.
+- gpio-ranges : gpio valid number range.
+- reg: physical address base for gpio base registers. There are 10 GPIO
+  physical address base in mt8183.
+
+Optional properties:
+- reg-names: gpio base register names. There are 10 gpio base register
+  names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4",
+  "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint".
+- interrupt-controller: Marks the device node as an interrupt controller
+- #interrupt-cells: Should be two.
+- interrupts : The interrupt outputs to sysirq.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+A pinctrl node should contain at least one subnodes representing the
+pinctrl groups available on the machine. Each subnode will list the
+pins it needs, and how they should be configured, with regard to muxer
+configuration, pullups, drive strength, input enable/disable and input schmitt.
+
+    node {
+	pinmux = <PIN_NUMBER_PINMUX>;
+	GENERIC_PINCONFIG;
+    };
+
+Required properties:
+- pinmux: integer array, represents gpio pin number and mux setting.
+    Supported pin number and mux varies for different SoCs, and are defined
+    as macros in boot/dts/<soc>-pinfunc.h directly.
+
+Optional properties:
+- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
+    bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
+    output-high, input-schmitt-enable, input-schmitt-disable
+    and drive-strength are valid.
+
+    Some special pins have extra pull up strength, there are R0 and R1 pull-up
+    resistors available, but for user, it's only need to set R1R0 as 00, 01,
+    10 or 11. So It needs config "mediatek,pull-up-adv" or
+    "mediatek,pull-down-adv" to support arguments for those special pins.
+    Valid arguments are from 0 to 3.
+
+    mediatek,tdsel: An integer describing the steps for output level shifter
+      duty cycle when asserted (high pulse width adjustment). Valid arguments
+      are from 0 to 15.
+    mediatek,rdsel: An integer describing the steps for input level shifter
+      duty cycle when asserted (high pulse width adjustment). Valid arguments
+      are from 0 to 63.
+
+    When config drive-strength, it can support some arguments, such as
+    MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
+    It can only support 2/4/6/8/10/12/14/16mA in mt8183.
+    For I2C pins, there are existing generic driving setup and the specific
+    driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving
+    adjustment in generic driving setup. But in specific driving setup,
+    they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+    driving setup for I2C pins, the existing generic driving setup will be
+    disabled. For some special features, we need the I2C pins specific
+    driving setup. The specific driving setup is controlled by E1E0EN.
+    So we need add extra vendor driving preperty instead of
+    the generic driving property.
+    We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific
+    driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1.
+    It is used to enable or disable the specific driving setup.
+    E1E0 is used to describe the detail strength specification of the I2C pin.
+    When E1=0/E0=0, the strength is 0.125mA.
+    When E1=0/E0=1, the strength is 0.25mA.
+    When E1=1/E0=0, the strength is 0.5mA.
+    When E1=1/E0=1, the strength is 1mA.
+    So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7.
+
+Examples:
+
+#include "mt8183-pinfunc.h"
+
+...
+{
+	pio: pinctrl@10005000 {
+		compatible = "mediatek,mt8183-pinctrl";
+		reg = <0 0x10005000 0 0x1000>,
+		      <0 0x11f20000 0 0x1000>,
+		      <0 0x11e80000 0 0x1000>,
+		      <0 0x11e70000 0 0x1000>,
+		      <0 0x11e90000 0 0x1000>,
+		      <0 0x11d30000 0 0x1000>,
+		      <0 0x11d20000 0 0x1000>,
+		      <0 0x11c50000 0 0x1000>,
+		      <0 0x11f30000 0 0x1000>,
+		      <0 0x1000b000 0 0x1000>;
+		reg-names = "iocfg0", "iocfg1", "iocfg2",
+			    "iocfg3", "iocfg4", "iocfg5",
+			    "iocfg6", "iocfg7", "iocfg8",
+			    "eint";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pio 0 0 192>;
+		interrupt-controller;
+		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+
+		i2c0_pins_a: i2c0 {
+			pins1 {
+				pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+					 <PINMUX_GPIO49__FUNC_SDA5>;
+				mediatek,pull-up-adv = <3>;
+				mediatek,drive-strength-adv = <7>;
+			};
+		};
+
+		i2c1_pins_a: i2c1 {
+			pins {
+				pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+					 <PINMUX_GPIO51__FUNC_SDA3>;
+				mediatek,pull-down-adv = <2>;
+				mediatek,drive-strength-adv = <4>;
+			};
+		};
+		...
+	};
+};