Merge branch 'for-6.12/goodix-spi' into for-linus

- Add support for a new Goodix HID over SPI driver (Charles Wang)

Note: this driver doesn't rely on the spefication of HID over SPI
provided by Microsoft, thus needs a separate driver, not a generic bus
transport low level driver.

Documentation/devicetree/bindings/input/goodix,gt7986u.yaml

@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7986u.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GOODIX GT7986U SPI HID Touchscreen
+
+maintainers:
+  - Charles Wang <charles.goodix@gmail.com>
+
+description: Supports the Goodix GT7986U touchscreen.
+  This touch controller reports data packaged according to the HID protocol,
+  but is incompatible with Microsoft's HID-over-SPI protocol.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt7986u
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  goodix,hid-report-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The register address for retrieving HID report data.
+      This address is related to the device firmware and may
+      change after a firmware update.
+
+  spi-max-frequency: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - goodix,hid-report-addr
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@0 {
+        compatible = "goodix,gt7986u";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        spi-max-frequency = <10000000>;
+        goodix,hid-report-addr = <0x22c8c>;
+      };
+    };
+
+...

drivers/hid/Kconfig

@@ -404,6 +404,12 @@ config HID_VIVALDI_COMMON
 	  option so that drivers can use common code to parse the HID
 	  descriptors for vivaldi function row keymap.
 
+config HID_GOODIX_SPI
+	tristate "Goodix GT7986U SPI HID touchscreen"
+	depends on SPI_MASTER
+	help
+	  Support for Goodix GT7986U SPI HID touchscreen device.
+
 config HID_GOOGLE_HAMMER
 	tristate "Google Hammer Keyboard"
 	select HID_VIVALDI_COMMON

drivers/hid/Makefile

@@ -54,6 +54,7 @@ obj-$(CONFIG_HID_GEMBIRD)	+= hid-gembird.o
 obj-$(CONFIG_HID_GFRM)		+= hid-gfrm.o
 obj-$(CONFIG_HID_GLORIOUS)  += hid-glorious.o
 obj-$(CONFIG_HID_VIVALDI_COMMON) += hid-vivaldi-common.o
+obj-$(CONFIG_HID_GOODIX_SPI)	+= hid-goodix-spi.o
 obj-$(CONFIG_HID_GOOGLE_HAMMER)	+= hid-google-hammer.o
 obj-$(CONFIG_HID_GOOGLE_STADIA_FF)	+= hid-google-stadiaff.o
 obj-$(CONFIG_HID_VIVALDI)	+= hid-vivaldi.o