i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset

The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.

Fixes: aafced6("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-mt65xx.c

@@ -479,6 +479,11 @@ static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
 static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
 {
 	u16 control_reg;
+	u16 intr_stat_reg;
+
+	mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_START);
+	intr_stat_reg = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
+	mtk_i2c_writew(i2c, intr_stat_reg, OFFSET_INTR_STAT);
 
 	if (i2c->dev_comp->apdma_sync) {
 		writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);