---

yaml
---
r: 20203
b: refs/heads/master
c: 25bf368
h: refs/heads/master
i:
  20201: 1a9a140
  20199: 553ad97
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fd401aee6273e869e2711de498e28f5208184797
+refs/heads/master: 25bf368b3d98668c5d5f38e2201d8bca16e52680

trunk/Documentation/powerpc/booting-without-of.txt

@@ -44,7 +44,6 @@
                            compiler and the textural representation of
                            the tree that can be "compiled" by dtc.
 
-
    November 21, 2005: Rev 0.5
 			 - Additions/generalizations for 32-bit
 			 - Changed to reflect the new arch/powerpc
@@ -1307,6 +1306,65 @@ platforms are moved over to use the flattened-device-tree model.
 	};
 
 
+   f) Freescale SOC USB controllers
+
+   The device node for a USB controller that is part of a Freescale
+   SOC is as described in the document "Open Firmware Recommended
+   Practice : Universal Serial Bus" with the following modifications
+   and additions :  
+
+   Required properties :
+    - compatible : Should be "fsl-usb2-mph" for multi port host usb
+      controllers, or "fsl-usb2-dr" for dual role usb controllers
+    - phy_type : For multi port host usb controllers, should be one of
+      "ulpi", or "serial". For dual role usb controllers, should be
+      one of "ulpi", "utmi", "utmi_wide", or "serial".
+    - reg : Offset and length of the register set for the device
+    - port0 : boolean; if defined, indicates port0 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port1" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+    - port1 : boolean; if defined, indicates port1 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port0" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+
+   Recommended properties :
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+
+   Example multi port host usb controller device node : 
+	usb@22000 {
+	        device_type = "usb";
+		compatible = "fsl-usb2-mph";
+		reg = <22000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <27 1>;
+		phy_type = "ulpi";
+		port0;
+		port1;
+	};
+
+   Example dual role usb controller device node : 
+	usb@23000 {
+		device_type = "usb";
+		compatible = "fsl-usb2-dr";
+		reg = <23000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <26 1>;
+		phy = "ulpi";
+	};
+
+
    More devices will be defined as this spec matures.
 
 

trunk/arch/arm/mach-s3c2410/mach-h1940.c

@@ -46,10 +46,11 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
+
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-lcd.h>
 
+#include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
 
 #include <linux/serial_core.h>
@@ -59,7 +60,12 @@
 #include "cpu.h"
 
 static struct map_desc h1940_iodesc[] __initdata = {
-	/* nothing here yet */
+	[0] = {
+		.virtual	= (unsigned long)H1940_LATCH,
+		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	},
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = {
 	}
 };
 
+/* Board control latch control */
+
+static unsigned int latch_state = H1940_LATCH_DEFAULT;
+
+void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	latch_state &= ~clear;
+	latch_state |= set;
+
+	__raw_writel(latch_state, H1940_LATCH);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(h1940_latch_control);
 
 
 /**

trunk/arch/arm/mach-s3c2410/s3c2400.h

@@ -0,0 +1,31 @@
+/* arch/arm/mach-s3c2410/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif

trunk/arch/i386/kernel/smpboot.c

@@ -87,11 +87,7 @@ EXPORT_SYMBOL(cpu_online_map);
 cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
-#ifdef CONFIG_HOTPLUG_CPU
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
-#else
 cpumask_t cpu_possible_map;
-#endif
 EXPORT_SYMBOL(cpu_possible_map);
 static cpumask_t smp_commenced_mask;
 

trunk/arch/i386/mach-voyager/voyager_smp.c

@@ -240,7 +240,7 @@ static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
 cpumask_t cpu_callin_map = CPU_MASK_NONE;
 cpumask_t cpu_callout_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_callout_map);
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
+cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 /* The per processor IRQ masks (these are usually kept in sync) */

trunk/arch/powerpc/Kconfig

@@ -83,6 +83,12 @@ config GENERIC_TBSYNC
 	default y if PPC32 && SMP
 	default n
 
+config DEFAULT_UIMAGE
+	bool
+	help
+	  Used to allow a board to specify it wants a uImage built by default
+	default n
+
 menu "Processor support"
 choice
 	prompt "Processor Type"

trunk/arch/powerpc/Makefile

@@ -142,6 +142,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 # Default to zImage, override when needed
 defaultimage-y			:= zImage
 defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
+defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage
 KBUILD_IMAGE := $(defaultimage-y)
 all: $(KBUILD_IMAGE)
 
@@ -167,6 +168,8 @@ endef
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+
+archmrproper:
 	$(Q)rm -rf arch/$(ARCH)/include
 
 archprepare: checkbin

trunk/arch/powerpc/kernel/Makefile

@@ -12,10 +12,10 @@ endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
-				   init_task.o process.o
+				   init_task.o process.o systbl.o
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
-				   signal_64.o ptrace32.o systbl.o \
+				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_power4.o \
 				   firmware.o sysfs.o idle_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
@@ -46,7 +46,7 @@ extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= time.o prom.o traps.o setup-common.o udbg.o
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o systbl.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o

trunk/arch/powerpc/kernel/systbl.S

@@ -36,8 +36,6 @@
 #ifdef CONFIG_PPC64
 #define sys_sigpending	sys_ni_syscall
 #define sys_old_getrlimit sys_ni_syscall
-#else
-#define ppc_rtas	sys_ni_syscall
 #endif
 
 _GLOBAL(sys_call_table)
@@ -323,3 +321,4 @@ SYSCALL(spu_run)
 SYSCALL(spu_create)
 COMPAT_SYS(pselect6)
 COMPAT_SYS(ppoll)
+SYSCALL(unshare)