Merge tag 'omap-for-v3.11/pm-voltdomain-signed' of git://git.kernel.o…

…rg/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Tony Lindgren:

PM voltage domain clean-up via Kevin Hilman <khilman@linaro.org>:

OMAP: PM: remove requirement for voltage domain data; remove dummy data

* tag 'omap-for-v3.11/pm-voltdomain-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: AM33xx: Remove the unused voltagedomain data
  ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm

Includes an update to Linux 3.10-rc6.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/bcache.txt

@@ -319,7 +319,10 @@ cache<0..n>
   Symlink to each of the cache devices comprising this cache set. 
 
 cache_available_percent
-  Percentage of cache device free.
+  Percentage of cache device which doesn't contain dirty data, and could
+  potentially be used for writeback.  This doesn't mean this space isn't used
+  for clean cached data; the unused statistic (in priority_stats) is typically
+  much lower.
 
 clear_stats
   Clears the statistics associated with this cache
@@ -423,8 +426,11 @@ nbuckets
   Total buckets in this cache
 
 priority_stats
-  Statistics about how recently data in the cache has been accessed.  This can
-  reveal your working set size.
+  Statistics about how recently data in the cache has been accessed.
+  This can reveal your working set size.  Unused is the percentage of
+  the cache that doesn't contain any data.  Metadata is bcache's
+  metadata overhead.  Average is the average priority of cache buckets.
+  Next is a list of quantiles with the priority threshold of each.
 
 written
   Sum of all data that has been written to the cache; comparison with

Documentation/devices.txt

@@ -498,12 +498,8 @@ Your cooperation is appreciated.
 
 		Each device type has 5 bits (32 minors).
 
- 13 block	8-bit MFM/RLL/IDE controller
-		  0 = /dev/xda		First XT disk whole disk
-		 64 = /dev/xdb		Second XT disk whole disk
-
-		Partitions are handled in the same way as IDE disks
-		(see major number 3).
+ 13 block	Previously used for the XT disk (/dev/xdN)
+		Deleted in kernel v3.9.
 
  14 char	Open Sound System (OSS)
 		  0 = /dev/mixer	Mixer control

Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt

@@ -1,7 +1,7 @@
 Atmel AT91RM9200 Real Time Clock
 
 Required properties:
-- compatible: should be: "atmel,at91rm9200-rtc"
+- compatible: should be: "atmel,at91rm9200-rtc" or "atmel,at91sam9x5-rtc"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - interrupts: rtc alarm/event interrupt

Documentation/dmatest.txt

@@ -34,7 +34,7 @@ command:
 After a while you will start to get messages about current status or error like
 in the original code.
 
-Note that running a new test will stop any in progress test.
+Note that running a new test will not stop any in progress test.
 
 The following command should return actual state of the test.
 	% cat /sys/kernel/debug/dmatest/run
@@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state.
 
 The module parameters that is supplied to the kernel command line will be used
 for the first performed test. After user gets a control, the test could be
-interrupted or re-run with same or different parameters. For the details see
-the above section "Part 2 - When dmatest is built as a module..."
+re-run with the same or different parameters. For the details see the above
+section "Part 2 - When dmatest is built as a module..."
 
 In both cases the module parameters are used as initial values for the test case.
 You always could check them at run-time by running

Documentation/filesystems/xfs.txt

@@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted.
 	removing extended attributes) the on-disk superblock feature
 	bit field will be updated to reflect this format being in use.
 
+	CRC enabled filesystems always use the attr2 format, and so
+	will reject the noattr2 mount option if it is set.
+
   barrier
 	Enables the use of block layer write barriers for writes into
 	the journal and unwritten extent conversion.  This allows for

Documentation/kernel-parameters.txt

@@ -3351,9 +3351,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			plus one apbt timer for broadcast timer.
 			x86_mrst_timer=apbt_only | lapic_and_apbt
 
-	xd=		[HW,XT] Original XT pre-IDE (RLL encoded) disks.
-	xd_geo=		See header of drivers/block/xd.c.
-
 	xen_emul_unplug=		[HW,X86,XEN]
 			Unplug Xen emulated devices
 			Format: [unplug0,][unplug1]

Documentation/m68k/kernel-options.txt

@@ -80,8 +80,6 @@ Valid names are:
   /dev/sdd: -> 0x0830 (forth SCSI disk)
   /dev/sde: -> 0x0840 (fifth SCSI disk)
   /dev/fd : -> 0x0200 (floppy disk)
-  /dev/xda: -> 0x0c00 (first XT disk, unused in Linux/m68k)
-  /dev/xdb: -> 0x0c40 (second XT disk, unused in Linux/m68k)
 
   The name must be followed by a decimal number, that stands for the
 partition number. Internally, the value of the number is just

MAINTAINERS

@@ -2890,8 +2890,8 @@ F:	drivers/media/dvb-frontends/ec100*
 
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <tyhicks@canonical.com>
-M:	Dustin Kirkland <dustin.kirkland@gazzang.com>
 L:	ecryptfs@vger.kernel.org
+W:	http://ecryptfs.org
 W:	https://launchpad.net/ecryptfs
 S:	Supported
 F:	Documentation/filesystems/ecryptfs.txt
@@ -4448,6 +4448,16 @@ S:	Maintained
 F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
+ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
+M:	Or Gerlitz <ogerlitz@mellanox.com>
+M:	Roi Dayan <roid@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+S:	Supported
+W:	http://www.openfabrics.org
+W:	www.open-iscsi.org
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+F:	drivers/infiniband/ulp/iser
+
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
@@ -5756,7 +5766,7 @@ M:	Matthew Wilcox <willy@linux.intel.com>
 L:	linux-nvme@lists.infradead.org
 T:	git git://git.infradead.org/users/willy/linux-nvme.git
 S:	Supported
-F:	drivers/block/nvme.c
+F:	drivers/block/nvme*
 F:	include/linux/nvme.h
 
 OMAP SUPPORT
@@ -7614,7 +7624,7 @@ F:	drivers/clk/spear/
 SPI SUBSYSTEM
 M:	Mark Brown <broonie@kernel.org>
 M:	Grant Likely <grant.likely@linaro.org>
-L:	spi-devel-general@lists.sourceforge.net
+L:	linux-spi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
 S:	Maintained
@@ -8994,7 +9004,7 @@ S:	Maintained
 F:	drivers/net/wireless/wl3501*
 
 WM97XX TOUCHSCREEN DRIVERS
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Mark Brown <broonie@kernel.org>
 M:	Liam Girdwood <lrg@slimlogic.co.uk>
 L:	linux-input@vger.kernel.org
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
@@ -9004,7 +9014,6 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS DRIVERS
-M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 L:	patches@opensource.wolfsonmicro.com
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-asoc
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/Makefile

@@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \

arch/arm/boot/compressed/debug.S

@@ -1,6 +1,8 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
 #include CONFIG_DEBUG_LL_INCLUDE
 
 ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
 	busyuart r3, r1
 	mov	 pc, lr
 ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+	adr	r1, 1f
+	ldmia	r1, {r2, r3}
+	add	r2, r2, r1
+	ldr	r1, [r2, r3]
+	strb	r0, [r1]
+	mov	r0, #0x03		@ SYS_WRITEC
+   ARM(	svc	#0x123456	)
+ THUMB(	svc	#0xab		)
+	mov	pc, lr
+	.align	2
+1:	.word	_GLOBAL_OFFSET_TABLE_ - .
+	.word	semi_writec_buf(GOT)
+ENDPROC(putc)
+
+	.bss
+	.global	semi_writec_buf
+	.type   semi_writec_buf, %object
+semi_writec_buf:
+	.space	4
+	.size	semi_writec_buf, 4
+
+#endif

arch/arm/boot/compressed/head-sa1100.S

@@ -11,6 +11,7 @@
 #include <asm/mach-types.h>
 
 		.section        ".start", "ax"
+		.arch	armv4
 
 __SA1100_start:
 

arch/arm/boot/compressed/head-shark.S

@@ -18,6 +18,7 @@
 	
 		.section	".start", "ax"
 
+		.arch armv4
 		b	__beginning
 	
 __ofw_data:	.long	0				@ the number of memory blocks

arch/arm/boot/compressed/head.S

@@ -11,6 +11,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+	.arch	armv7-a
 /*
  * Debugging stuff
  *
@@ -805,8 +806,8 @@ call_cache_fn:	adr	r12, proc_types
 		.align	2
 		.type	proc_types,#object
 proc_types:
-		.word	0x00000000		@ old ARM ID
-		.word	0x0000f000
+		.word	0x41000000		@ old ARM ID
+		.word	0xff00f000
 		mov	pc, lr
  THUMB(		nop				)
 		mov	pc, lr

arch/arm/boot/dts/armada-xp-gp.dts

@@ -39,8 +39,9 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000
-			  0xf0000000 0 0xf0000000 0x1000000>;
+		ranges = <0          0 0xd0000000 0x100000  /* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+			  0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB  */>;
 
 		internal-regs {
 			serial@12000 {

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -27,8 +27,9 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000
-			  0xf0000000 0 0xf0000000 0x8000000>;
+		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
+			  0xf0000000 0 0xf0000000 0x8000000     /* Device Bus, NOR 128MiB   */>;
 
 		internal-regs {
 			serial@12000 {

arch/arm/boot/dts/bcm2835.dtsi

@@ -44,6 +44,7 @@
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
 			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
 		};
 
 		gpio: gpio {

arch/arm/boot/dts/imx25.dtsi

@@ -141,8 +141,8 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>;
-				clock-names = "ipg";
+				clocks = <&clks 62>, <&clks 62>;
+				clock-names = "ipg", "per";
 				interrupts = <14>;
 				status = "disabled";
 			};
@@ -182,8 +182,8 @@
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x50004000 0x4000>;
 				interrupts = <0>;
-				clocks = <&clks 80>;
-				clock-names = "ipg";
+				clocks = <&clks 80>, <&clks 80>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -210,8 +210,8 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x50010000 0x4000>;
-				clocks = <&clks 79>;
-				clock-names = "ipg";
+				clocks = <&clks 79>, <&clks 79>;
+				clock-names = "ipg", "per";
 				interrupts = <13>;
 				status = "disabled";
 			};

arch/arm/boot/dts/imx27.dtsi

@@ -131,7 +131,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 0>;
+				clocks = <&clks 53>, <&clks 53>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -142,7 +142,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 0>;
+				clocks = <&clks 52>, <&clks 52>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -223,7 +223,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 0>;
+				clocks = <&clks 51>, <&clks 51>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/imx51.dtsi

@@ -631,7 +631,7 @@
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 0>;
+				clocks = <&clks 55>, <&clks 55>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/imx53.dtsi

@@ -714,7 +714,7 @@
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 0>;
+				clocks = <&clks 55>, <&clks 55>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/include/asm/percpu.h

@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
 static inline unsigned long __my_cpu_offset(void)
 {
 	unsigned long off;
-	/* Read TPIDRPRW */
-	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+	register unsigned long *sp asm ("sp");
+
+	/*
+	 * Read TPIDRPRW.
+	 * We want to allow caching the value, so avoid using volatile and
+	 * instead use a fake stack read to hazard against barrier().
+	 */
+	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
 	return off;
 }
 #define __my_cpu_offset __my_cpu_offset()