Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/a…

…rm/arm-soc

Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson:
 "These changes are all specific to one board only.  We're trying to
  keep the number of board files low, but generally board level updates
  are ok on platforms that are working on moving towards DT based
  probing, which will eventually lead to removing them.

  The board-ams-delta.c board file gets a conflict between the removal
  of ams_delta_config and the addition of a lot of other data.  The
  Kconfig file has two changes in the same line, and in exynos, the
  power domain cleanup conflicts with the addition of the image sensor
  device.

  Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  [olof: Amended a fix for a mismerge to board-omap4panda.c]
  Signed-off-by: Olof Johansson <olof@lixom.net>"

Fixed up some fairly trivial conflicts manually.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits)
  i.MX35-PDK: Add Camera support
  ARM : mx35: 3ds-board: add framebuffer device
  pxa/hx4700: Remove pcmcia platform_device structure
  ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35%
  ARM: pxa/hx4700: Remove unwanted request for GPIO105
  ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board
  ARM: EXYNOS: Register JPEG on nuri
  ARM: EXYNOS: Register JPEG on universal_c210
  ARM: S5PV210: Enable JPEG on SMDKV210
  ARM: S5PV210: Add JPEG board definition
  ARM: EXYNOS: Enable JPEG on Origen
  ARM: EXYNOS: Enable JPEG on SMDKV310
  ARM: EXYNOS: Add __init attribute to universal_camera_init()
  ARM: EXYNOS: Add __init attribute to nuri_camera_init()
  ARM: S5PV210: Enable FIMC on SMDKC110
  ARM: S5PV210: Enable FIMC on SMDKV210
  ARM: S5PV210: Enable MFC on SMDKC110
  ARM: S5PV210: Enable MFC on SMDKV210
  ARM: EXYNOS: Enable G2D on SMDKV310
  ARM: tegra: update defconfig
  ...

arch/arm/Kconfig

@@ -1583,6 +1583,7 @@ config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 355 if ARCH_U8500
+	default 264 if MACH_H4700
 	default 0
 	help
 	  Maximum number of GPIOs in the system.

arch/arm/boot/dts/kirkwood-dreamplug.dts

@@ -0,0 +1,25 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+
+/ {
+	model = "Globalscale Technologies Dreamplug";
+	compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+	};
+
+	serial@f1012000 {
+		compatible = "ns16550a";
+		reg = <0xf1012000 0xff>;
+		reg-shift = <2>;
+		interrupts = <33>;
+		clock-frequency = <200000000>;
+	};
+};

arch/arm/boot/dts/kirkwood.dtsi

@@ -0,0 +1,6 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "marvell,kirkwood";
+};
+

arch/arm/boot/dts/tegra-paz00.dts

@@ -35,6 +35,11 @@
 
 	i2c@7000d000 {
 		clock-frequency = <400000>;
+
+		adt7461@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	serial@70006000 {
@@ -74,4 +79,25 @@
 	sdhci@c8000600 {
 		support-8bit;
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 79 1>; /* gpio PJ7, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		wifi {
+			label = "wifi-led";
+			gpios = <&gpio 24 0>;
+			linux,default-trigger = "rfkill0";
+		};
+	};
 };

arch/arm/configs/tegra_defconfig

@@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ELF_CORE is not set
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_EFI_PARTITION=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_TEGRA=y
@@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y
 CONFIG_MACH_TRIMSLICE=y
 CONFIG_MACH_WARIO=y
 CONFIG_MACH_VENTANA=y
-CONFIG_TEGRA_DEBUG_UARTD=y
-CONFIG_ARM_ERRATA_742230=y
+CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=2
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -68,14 +73,14 @@ CONFIG_IPV6_MULTIPLE_TABLES=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_MISC_DEVICES=y
 CONFIG_AD525X_DPOT=y
 CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
@@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
 # CONFIG_WLAN is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
 CONFIG_SPI_TEGRA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_MFD_TPS6586X=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_TPS6586X=y
 CONFIG_SOUND=y
 CONFIG_SND=y
@@ -116,11 +122,13 @@ CONFIG_SND_SOC=y
 CONFIG_SND_SOC_TEGRA=y
 CONFIG_SND_SOC_TEGRA_WM8903=y
 CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
+CONFIG_SND_SOC_TEGRA_ALC5632=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
@@ -130,6 +138,11 @@ CONFIG_STAGING=y
 CONFIG_IIO=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_AK8975=y
+CONFIG_MFD_NVEC=y
+CONFIG_KEYBOARD_NVEC=y
+CONFIG_SERIO_NVEC_PS2=y
+CONFIG_TEGRA_IOMMU_GART=y
+CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_EFI_PARTITION=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
@@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_LL=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_ARC4=y
 CONFIG_CRYPTO_TWOFISH=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TEGRA_AES=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y

arch/arm/mach-exynos/Kconfig

@@ -179,7 +179,9 @@ config MACH_SMDKV310
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
@@ -225,7 +227,9 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_G2D
 	select S5P_DEV_CSIS0
+	select S5P_DEV_JPEG
 	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
@@ -262,11 +266,14 @@ config MACH_NURI
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
+	select S3C_DEV_I2C6
 	select S5P_DEV_CSIS0
+	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_G2D
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
@@ -276,6 +283,7 @@ config MACH_NURI
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_I2C6
 	select EXYNOS4_SETUP_SDHCI
 	select EXYNOS4_SETUP_USB_PHY
 	select S5P_SETUP_MIPIPHY
@@ -296,7 +304,9 @@ config MACH_ORIGEN
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
 	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI