mac80211: 802.11p OCB mode support

This patch adds 802.11p OCB (Outside the Context of a BSS) mode
support.

When communicating in OCB mode a mandatory wildcard BSSID
(48 '1' bits) is used.

The EDCA parameters handling function was changed to support
802.11p specific values.

The insertion of a newly discovered STAs is done in the similar way
as in the IBSS mode -- through the deferred insertion.

The OCB mode uses a periodic 'housekeeping task' for expiration of
disconnected STAs (in the similar manner as in the MESH mode).

New Kconfig option for verbose OCB debugging outputs is added.

Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

include/net/mac80211.h

@@ -263,6 +263,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
  *	note that this is only called when it changes after the channel
  *	context had been assigned.
+ * @BSS_CHANGED_OCB: OCB join status changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -287,6 +288,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_P2P_PS		= 1<<19,
 	BSS_CHANGED_BEACON_INFO		= 1<<20,
 	BSS_CHANGED_BANDWIDTH		= 1<<21,
+	BSS_CHANGED_OCB                 = 1<<22,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };

net/mac80211/Kconfig

@@ -176,6 +176,17 @@ config MAC80211_HT_DEBUG
 
 	  Do not select this option.
 
+config MAC80211_OCB_DEBUG
+	bool "Verbose OCB debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out
+	  very verbose OCB debugging messages. It should not
+	  be selected on production systems as those messages
+	  are remotely triggerable.
+
+	  Do not select this option.
+
 config MAC80211_IBSS_DEBUG
 	bool "Verbose IBSS debugging"
 	depends on MAC80211_DEBUG_MENU

net/mac80211/Makefile

@@ -27,7 +27,8 @@ mac80211-y := \
 	event.o \
 	chan.o \
 	trace.o mlme.o \
-	tdls.o
+	tdls.o \
+	ocb.o
 
 mac80211-$(CONFIG_MAC80211_LEDS) += led.o
 mac80211-$(CONFIG_MAC80211_DEBUGFS) += \

net/mac80211/cfg.c

@@ -2019,6 +2019,17 @@ static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
 	return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev));
 }
 
+static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev,
+			      struct ocb_setup *setup)
+{
+	return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup);
+}
+
+static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev)
+{
+	return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev));
+}
+
 static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
 				    int rate[IEEE80211_NUM_BANDS])
 {
@@ -3693,6 +3704,8 @@ const struct cfg80211_ops mac80211_config_ops = {
 	.join_mesh = ieee80211_join_mesh,
 	.leave_mesh = ieee80211_leave_mesh,
 #endif
+	.join_ocb = ieee80211_join_ocb,
+	.leave_ocb = ieee80211_leave_ocb,
 	.change_bss = ieee80211_change_bss,
 	.set_txq_params = ieee80211_set_txq_params,
 	.set_monitor_channel = ieee80211_set_monitor_channel,

net/mac80211/chan.c

@@ -675,6 +675,7 @@ void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local,
 		case NL80211_IFTYPE_ADHOC:
 		case NL80211_IFTYPE_WDS:
 		case NL80211_IFTYPE_MESH_POINT:
+		case NL80211_IFTYPE_OCB:
 			break;
 		default:
 			WARN_ON_ONCE(1);

net/mac80211/debug.h

@@ -2,6 +2,12 @@
 #define __MAC80211_DEBUG_H
 #include <net/cfg80211.h>
 
+#ifdef CONFIG_MAC80211_OCB_DEBUG
+#define MAC80211_OCB_DEBUG 1
+#else
+#define MAC80211_OCB_DEBUG 0
+#endif
+
 #ifdef CONFIG_MAC80211_IBSS_DEBUG
 #define MAC80211_IBSS_DEBUG 1
 #else
@@ -131,6 +137,10 @@ do {									\
 	_sdata_dbg(MAC80211_HT_DEBUG && net_ratelimit(),		\
 		   sdata, fmt, ##__VA_ARGS__)
 
+#define ocb_dbg(sdata, fmt, ...)					\
+	_sdata_dbg(MAC80211_OCB_DEBUG,					\
+		   sdata, fmt, ##__VA_ARGS__)
+
 #define ibss_dbg(sdata, fmt, ...)					\
 	_sdata_dbg(MAC80211_IBSS_DEBUG,					\
 		   sdata, fmt, ##__VA_ARGS__)

net/mac80211/driver-ops.h

@@ -214,7 +214,8 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local,
 				    BSS_CHANGED_BEACON_ENABLED) &&
 			 sdata->vif.type != NL80211_IFTYPE_AP &&
 			 sdata->vif.type != NL80211_IFTYPE_ADHOC &&
-			 sdata->vif.type != NL80211_IFTYPE_MESH_POINT))
+			 sdata->vif.type != NL80211_IFTYPE_MESH_POINT &&
+			 sdata->vif.type != NL80211_IFTYPE_OCB))
 		return;
 
 	if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE ||

net/mac80211/ieee80211_i.h

@@ -576,6 +576,25 @@ struct ieee80211_if_ibss {
 	} state;
 };
 
+/**
+ * struct ieee80211_if_ocb - OCB mode state
+ *
+ * @housekeeping_timer: timer for periodic invocation of a housekeeping task
+ * @wrkq_flags: OCB deferred task action
+ * @incomplete_lock: delayed STA insertion lock
+ * @incomplete_stations: list of STAs waiting for delayed insertion
+ * @joined: indication if the interface is connected to an OCB network
+ */
+struct ieee80211_if_ocb {
+	struct timer_list housekeeping_timer;
+	unsigned long wrkq_flags;
+
+	spinlock_t incomplete_lock;
+	struct list_head incomplete_stations;
+
+	bool joined;
+};
+
 /**
  * struct ieee80211_mesh_sync_ops - Extensible synchronization framework interface
  *
@@ -869,6 +888,7 @@ struct ieee80211_sub_if_data {
 		struct ieee80211_if_managed mgd;
 		struct ieee80211_if_ibss ibss;
 		struct ieee80211_if_mesh mesh;
+		struct ieee80211_if_ocb ocb;
 		u32 mntr_flags;
 	} u;
 
@@ -1505,6 +1525,15 @@ int ieee80211_ibss_csa_beacon(struct ieee80211_sub_if_data *sdata,
 int ieee80211_ibss_finish_csa(struct ieee80211_sub_if_data *sdata);
 void ieee80211_ibss_stop(struct ieee80211_sub_if_data *sdata);
 
+/* OCB code */
+void ieee80211_ocb_work(struct ieee80211_sub_if_data *sdata);
+void ieee80211_ocb_rx_no_sta(struct ieee80211_sub_if_data *sdata,
+			     const u8 *bssid, const u8 *addr, u32 supp_rates);
+void ieee80211_ocb_setup_sdata(struct ieee80211_sub_if_data *sdata);
+int ieee80211_ocb_join(struct ieee80211_sub_if_data *sdata,
+		       struct ocb_setup *setup);
+int ieee80211_ocb_leave(struct ieee80211_sub_if_data *sdata);
+
 /* mesh code */
 void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata);
 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,

net/mac80211/iface.c

@@ -258,6 +258,15 @@ static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
 	/* we hold the RTNL here so can safely walk the list */
 	list_for_each_entry(nsdata, &local->interfaces, list) {
 		if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
+			/*
+			 * Only OCB and monitor mode may coexist
+			 */
+			if ((sdata->vif.type == NL80211_IFTYPE_OCB &&
+			     nsdata->vif.type != NL80211_IFTYPE_MONITOR) ||
+			    (sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+			     nsdata->vif.type == NL80211_IFTYPE_OCB))
+				return -EBUSY;
+
 			/*
 			 * Allow only a single IBSS interface to be up at any
 			 * time. This is restricted because beacon distribution
@@ -1283,6 +1292,9 @@ static void ieee80211_iface_work(struct work_struct *work)
 			break;
 		ieee80211_mesh_work(sdata);
 		break;
+	case NL80211_IFTYPE_OCB:
+		ieee80211_ocb_work(sdata);
+		break;
 	default:
 		break;
 	}
@@ -1302,6 +1314,9 @@ static void ieee80211_recalc_smps_work(struct work_struct *work)
 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 				  enum nl80211_iftype type)
 {
+	static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff,
+						    0xff, 0xff, 0xff};
+
 	/* clear type-dependent union */
 	memset(&sdata->u, 0, sizeof(sdata->u));
 
@@ -1354,7 +1369,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
 		ieee80211_sta_setup_sdata(sdata);
 		break;
 	case NL80211_IFTYPE_OCB:
-		/* to be implemented in the future */
+		sdata->vif.bss_conf.bssid = bssid_wildcard;
+		ieee80211_ocb_setup_sdata(sdata);
 		break;
 	case NL80211_IFTYPE_ADHOC:
 		sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
@@ -1403,6 +1419,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_OCB:
 		/*
 		 * Could maybe also all others here?
 		 * Just not sure how that interacts
@@ -1418,6 +1435,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_OCB:
 		/*
 		 * Could probably support everything
 		 * but WDS here (WDS do_open can fail