---

yaml
---
r: 123825
b: refs/heads/master
c: ddbf565
h: refs/heads/master
i:
  123823: 5248f17
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c6ad115876763e4f15055982ecb9579cb7abab5f
+refs/heads/master: ddbf5654b494bfd9831ad7024c04f4ba53583a94

trunk/arch/arm/mach-s3c2410/include/mach/gpio.h

@@ -15,10 +15,4 @@
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
 
-/* some boards require extra gpio capacity to support external
- * devices that need GPIO.
- */
-
-#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
-
 #include <asm-generic/gpio.h>

trunk/arch/arm/mach-s3c2412/mach-jive.c

@@ -398,12 +398,11 @@ static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
-	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
 
 static struct platform_device jive_device_lcdspi = {
-	.name		= "spi_s3c24xx_gpio",
+	.name		= "s3c24xx-spi-gpio",
 	.id		= 1,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_lcd_spi,
@@ -420,12 +419,11 @@ static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
 	.pin_clk	= S3C2410_GPB4,
 	.pin_mosi	= S3C2410_GPB9,
-	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
 
 static struct platform_device jive_device_wm8750 = {
-	.name		= "spi_s3c24xx_gpio",
+	.name		= "s3c24xx-spi-gpio",
 	.id		= 2,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_wm8750_spi,

trunk/arch/arm/mach-s3c2440/Kconfig

@@ -32,7 +32,6 @@ config MACH_ANUBIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -42,7 +41,6 @@ config MACH_OSIRIS
 	select CPU_S3C2440
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
-	select S3C24XX_GPIO_EXTRA128
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.

trunk/arch/arm/mach-s3c2440/mach-anubis.c

@@ -366,29 +366,24 @@ static struct sm501_initdata anubis_sm501_initdata = {
 		.mask	= 0,
 	},
 
-	.devices	= SM501_USE_GPIO,
-
 	/* set the SDRAM and bus clocks */
 	.mclk		= 72 * MHZ,
 	.m1xclk		= 144 * MHZ,
 };
 
 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 	[0] = {
-		.bus_num	= 1,
 		.pin_scl	= 44,
 		.pin_sda	= 45,
 	},
 	[1] = {
-		.bus_num	= 2,
 		.pin_scl	= 40,
 		.pin_sda	= 41,
 	},
 };
 
 static struct sm501_platdata anubis_sm501_platdata = {
 	.init		= &anubis_sm501_initdata,
-	.gpio_base	= -1,
 	.gpio_i2c	= anubis_sm501_gpio_i2c,
 	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
 };

trunk/arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -28,7 +28,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
-#include <mach/fb.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -46,7 +45,6 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
-#include <asm/plat-s3c24xx/mci.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
 	/* Nothing here */
@@ -164,60 +162,19 @@ static struct platform_device at2440evb_device_eth = {
 	},
 };
 
-static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
-};
-
-/* 7" LCD panel */
-
-static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
-
-	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
-			  S3C2410_LCDCON5_INVVLINE |
-			  S3C2410_LCDCON5_INVVFRAME |
-			  S3C2410_LCDCON5_PWREN |
-			  S3C2410_LCDCON5_HWSWP,
-
-	.type		= S3C2410_LCDCON1_TFT,
-
-	.width		= 800,
-	.height		= 480,
-
-	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
-	.xres		= 800,
-	.yres		= 480,
-	.bpp		= 16,
-	.left_margin	= 88,
-	.right_margin	= 40,
-	.hsync_len	= 128,
-	.upper_margin	= 32,
-	.lower_margin	= 11,
-	.vsync_len	= 2,
-};
-
-static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
-	.displays	= &at2440evb_lcd_cfg,
-	.num_displays	= 1,
-	.default_display = 0,
-};
-
 static struct platform_device *at2440evb_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c,
 	&s3c_device_rtc,
 	&s3c_device_nand,
-	&s3c_device_sdi,
-	&s3c_device_lcd,
 	&at2440evb_device_eth,
 };
 
 static void __init at2440evb_map_io(void)
 {
 	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
-	s3c_device_sdi.name = "s3c2440-sdi";
-	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
@@ -226,7 +183,6 @@ static void __init at2440evb_map_io(void)
 
 static void __init at2440evb_init(void)
 {
-	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
 }
 

trunk/arch/arm/mach-s3c24a0/include/mach/irqs.h

@@ -0,0 +1,115 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_24A0_IRQS_H
+#define __ASM_ARCH_24A0_IRQS_H __FILE__
+
+#define IRQ_EINT0t2	S3C2410_IRQ(0)	/* 16 */
+/* for generic entry-macro.S */
+#define IRQ_EINT0	IRQ_EINT0t2
+
+#define IRQ_EINT3t6	S3C2410_IRQ(1)
+#define IRQ_EINT7t10	S3C2410_IRQ(2)
+#define IRQ_EINT11t14	S3C2410_IRQ(3)
+#define IRQ_EINT15t18	S3C2410_IRQ(4)	/* 20 */
+#define IRQ_TICK	S3C2410_IRQ(5)
+#define IRQ_DCTQ	S3C2410_IRQ(6)
+#define IRQ_MC		S3C2410_IRQ(7)
+#define IRQ_ME		S3C2410_IRQ(8)	/* 24 */
+#define IRQ_KEYPAD	S3C2410_IRQ(9)
+#define IRQ_TIMER0	S3C2410_IRQ(10)
+#define IRQ_TIMER1	S3C2410_IRQ(11)
+#define IRQ_TIMER2	S3C2410_IRQ(12)
+#define IRQ_TIMER3_4	S3C2410_IRQ(13)
+#define IRQ_OS_TIMER	IRQ_TIMER3_4
+#define IRQ_LCD		S3C2410_IRQ(14)
+#define IRQ_CAM_C	S3C2410_IRQ(15)
+#define IRQ_WDT_BATFLT	S3C2410_IRQ(16)	/* 32 */
+#define IRQ_UART0	S3C2410_IRQ(17)
+#define IRQ_CAM_P	S3C2410_IRQ(18)
+#define IRQ_MODEM	S3C2410_IRQ(19)
+#define IRQ_DMA		S3C2410_IRQ(20)
+#define IRQ_SDI		S3C2410_IRQ(21)
+#define IRQ_SPI0	S3C2410_IRQ(22)
+#define IRQ_UART1	S3C2410_IRQ(23)
+#define IRQ_AC97_NFLASH	S3C2410_IRQ(24)	/* 40 */
+#define IRQ_USBD	S3C2410_IRQ(25)
+#define IRQ_USBH	S3C2410_IRQ(26)
+#define IRQ_IIC		S3C2410_IRQ(27)
+#define IRQ_IRDA_MSTICK	S3C2410_IRQ(28)	/* 44 */
+#define IRQ_VLX_SPI1	S3C2410_IRQ(29)
+#define IRQ_RTC		S3C2410_IRQ(30)	/* 46 */
+#define IRQ_ADC_PEN     S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT00	S3C2410_IRQ(32)	/* 48 */
+#define IRQ_EINT1	S3C2410_IRQ(33)
+#define IRQ_EINT2	S3C2410_IRQ(34)
+#define IRQ_EINT3	S3C2410_IRQ(35)
+#define IRQ_EINT4	S3C2410_IRQ(36)
+#define IRQ_EINT5	S3C2410_IRQ(37)
+#define IRQ_EINT6	S3C2410_IRQ(38)
+#define IRQ_EINT7	S3C2410_IRQ(39)
+#define IRQ_EINT8	S3C2410_IRQ(40)
+#define IRQ_EINT9	S3C2410_IRQ(41)
+#define IRQ_EINT10	S3C2410_IRQ(42)
+#define IRQ_EINT11	S3C2410_IRQ(43)
+#define IRQ_EINT12	S3C2410_IRQ(44)
+#define IRQ_EINT13	S3C2410_IRQ(45)
+#define IRQ_EINT14	S3C2410_IRQ(46)
+#define IRQ_EINT15	S3C2410_IRQ(47)
+#define IRQ_EINT16	S3C2410_IRQ(48)
+#define IRQ_EINT17	S3C2410_IRQ(49)
+#define IRQ_EINT18	S3C2410_IRQ(50)
+
+/* SUB IRQS */
+#define IRQ_S3CUART_RX0		S3C2410_IRQ(51)	/* 67 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQ(52)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQ(53)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQ(54)
+#define IRQ_S3CUART_TX1		S3C2410_IRQ(55)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQ(56)
+
+#define IRQ_S3CUART_RX2		(0x0)
+#define IRQ_S3CUART_TX2		(0x0)
+#define IRQ_S3CUART_ERR2	(0x0)
+
+
+#define IRQ_IRDA	S3C2410_IRQ(57)
+#define IRQ_MSTICK	S3C2410_IRQ(58)
+#define IRQ_RESERVED0	S3C2410_IRQ(59)
+#define IRQ_RESERVED1	S3C2410_IRQ(60)
+#define IRQ_RESERVED2	S3C2410_IRQ(61)
+#define IRQ_TIMER3	S3C2410_IRQ(62)
+#define IRQ_TIMER4	S3C2410_IRQ(63)
+#define IRQ_WDT		S3C2410_IRQ(64)
+#define IRQ_BATFLT	S3C2410_IRQ(65)
+#define IRQ_POST	S3C2410_IRQ(66)
+#define IRQ_DISP_FIFO	S3C2410_IRQ(67)
+#define IRQ_PENUP	S3C2410_IRQ(68)
+#define IRQ_PENDN	S3C2410_IRQ(69)
+#define IRQ_ADC		S3C2410_IRQ(70)
+#define IRQ_DISP_FRAME	S3C2410_IRQ(71)
+#define IRQ_NFLASH	S3C2410_IRQ(72)
+#define IRQ_AC97	S3C2410_IRQ(73)
+#define IRQ_SPI1	S3C2410_IRQ(74)
+#define IRQ_VLX		S3C2410_IRQ(75)
+#define IRQ_DMA0	S3C2410_IRQ(76)
+#define IRQ_DMA1	S3C2410_IRQ(77)
+#define IRQ_DMA2	S3C2410_IRQ(78)
+#define IRQ_DMA3	S3C2410_IRQ(79)
+
+#define IRQ_TC		(0x0)
+
+#define NR_IRQS		(IRQ_DMA3+1)
+
+#endif /* __ASM_ARCH_24A0_IRQS_H */

trunk/arch/arm/mach-s3c24a0/include/mach/map.h

@@ -0,0 +1,78 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24A0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MAP_H
+#define __ASM_ARCH_24A0_MAP_H __FILE__
+
+#define S3C24A0_PA_IO_BASE	(0x40000000)
+#define S3C24A0_PA_CLKPWR	(0x40000000)
+#define S3C24A0_PA_IRQ		(0x40200000)
+#define S3C24A0_PA_DMA		(0x40400000)
+#define S3C24A0_PA_MEMCTRL	(0x40C00000)
+#define S3C24A0_PA_NAND		(0x40C00000)
+#define S3C24A0_PA_SROM		(0x40C20000)
+#define S3C24A0_PA_SDRAM	(0x40C40000)
+#define S3C24A0_PA_BUSM		(0x40CE0000)
+#define S3C24A0_PA_USBHOST	(0x41000000)
+#define S3C24A0_PA_MODEMIF	(0x41180000)
+#define S3C24A0_PA_IRDA		(0x41800000)
+#define S3C24A0_PA_TIMER	(0x44000000)
+#define S3C24A0_PA_WATCHDOG	(0x44100000)
+#define S3C24A0_PA_RTC		(0x44200000)
+#define S3C24A0_PA_UART		(0x44400000)
+#define S3C24A0_PA_UART0	(S3C24A0_PA_UART)
+#define S3C24A0_PA_UART1	(S3C24A0_PA_UART + 0x4000)
+#define S3C24A0_PA_SPI		(0x44500000)
+#define S3C24A0_PA_IIC		(0x44600000)
+#define S3C24A0_PA_IIS		(0x44700000)
+#define S3C24A0_PA_GPIO		(0x44800000)
+#define S3C24A0_PA_KEYIF	(0x44900000)
+#define S3C24A0_PA_USBDEV	(0x44A00000)
+#define S3C24A0_PA_AC97		(0x45000000)
+#define S3C24A0_PA_ADC		(0x45800000)
+#define S3C24A0_PA_SDI		(0x46000000)
+#define S3C24A0_PA_MS		(0x46100000)
+#define S3C24A0_PA_LCD		(0x4A000000)
+#define S3C24A0_PA_VPOST	(0x4A100000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C24A0_CS0	(0x00000000)
+#define S3C24A0_CS1	(0x04000000)
+#define S3C24A0_CS2	(0x08000000)
+#define S3C24A0_CS3	(0x0C000000)
+#define S3C24A0_CS4	(0x10000000)
+#define S3C24A0_CS5	(0x40000000)
+
+#define S3C24A0_SDRAM_PA	(S3C24A0_CS4)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C24A0_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C24A0_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C24A0_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C24A0_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C24A0_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C24A0_PA_LCD
+#define S3C24XX_PA_UART		S3C24A0_PA_UART
+#define S3C24XX_PA_TIMER	S3C24A0_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C24A0_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C24A0_PA_WATCHDOG
+#define S3C24XX_PA_IIC		S3C24A0_PA_IIC
+#define S3C24XX_PA_IIS		S3C24A0_PA_IIS
+#define S3C24XX_PA_GPIO		S3C24A0_PA_GPIO
+#define S3C24XX_PA_RTC		S3C24A0_PA_RTC
+#define S3C24XX_PA_ADC		S3C24A0_PA_ADC
+#define S3C24XX_PA_SPI		S3C24A0_PA_SPI
+
+#endif /* __ASM_ARCH_24A0_MAP_H */

trunk/arch/arm/mach-s3c24a0/include/mach/memory.h

@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h
+ *  from linux/include/asm-arm/arch-rpc/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_24A0_MEMORY_H
+#define __ASM_ARCH_24A0_MEMORY_H __FILE__
+
+#define PHYS_OFFSET UL(0x10000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif