Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/lin…

…ux into drm-next

1) includes all the drm/msm side of things for upstream kernel working
on dragonboard 410c (still some pending work on adv7533 bridge chip)
2) initial support for msm8x94 (snapdragon 810)
3) support for msm8x74v1 (in addition to existing v2 support)
4) support for dma planes on mdp5 (additional planes that cannot scale/csc)
5) more yuv format support for mdp5 (single plane vyuy/uyvy/yuyv/yvyu,
two plane nv16/nv61, and three plane yuv420/yvu420)
6) rotation support for mdp5
7) initial hdcp support
8) fixes, etc

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (46 commits)
  drm/msm/dsi: Introduce DSI configuration module
  drm/msm/dsi: Make each PHY type compilation independent
  drm/msm/dsi: Split PHY drivers to separate files
  drm/msm/dsi: Return void from msm_dsi_phy_disable()
  drm/msm/dsi: Specify bitmask to set source PLL
  drm/msm/mdp: Clear pending interrupt status before enable interrupt
  drm/msm/mdp5: Add rotation (hflip/vflip) support to MDP5 planes (v2)
  drm/msm: add calls to prepare and unprepare panel
  drm/msm/dsi: Modify dsi manager bridge ops to work with external bridges
  drm/msm/dsi: Allow dsi to connect to an external bridge
  drm/msm/dsi: Create a helper to check if there is a connected device
  drm/msm/dsi: Refer to connected device as 'device' instead of 'panel'
  drm/msm/dsi: Make TE gpio optional
  drm/msm: mdp4 lvds: get panel node via of graph parsing
  drm/msm: dsi host: Use device graph parsing to parse connected panel
  drm/msm: dsi host: add missing of_node_put()
  drm/msm: Enable clocks during enable/disable_vblank() callbacks
  drm/msm/mdp5: Add support for msm8x74v1
  drm/msm/mdp5: Add DMA pipe planes for MDP5
  drm/msm/mdp: Add capabilities to MDP planes (v2)
  ...

Documentation/devicetree/bindings/drm/msm/dsi.txt

@@ -30,20 +30,27 @@ Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
   See files in Documentation/devicetree/bindings/panel/ for each supported
   panel.
-- qcom,dual-panel-mode: Boolean value indicating if the DSI controller is
+- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
   driving a panel which needs 2 DSI links.
-- qcom,master-panel: Boolean value indicating if the DSI controller is driving
+- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
   the master link of the 2-DSI panel.
-- qcom,sync-dual-panel: Boolean value indicating if the DSI controller is
+- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
   driving a 2-DSI panel whose 2 links need receive command simultaneously.
 - interrupt-parent: phandle to the MDP block if the interrupt signal is routed
   through MDP block
+- pinctrl-names: the pin control state names; should contain "default"
+- pinctrl-0: the default pinctrl state (active)
+- pinctrl-n: the "sleep" pinctrl state
+- port: DSI controller output port. This contains one endpoint subnode, with its
+  remote-endpoint set to the phandle of the connected panel's endpoint.
+  See Documentation/devicetree/bindings/graph.txt for device graph info.
 
 DSI PHY:
 Required properties:
 - compatible: Could be the following
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
+  * "qcom,dsi-phy-20nm"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
@@ -59,6 +66,10 @@ Required properties:
   * "iface_clk"
 - vddio-supply: phandle to vdd-io regulator device node
 
+Optional properties:
+- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
+  regulator is wanted.
+
 Example:
 	mdss_dsi0: qcom,mdss_dsi@fd922800 {
 		compatible = "qcom,mdss-dsi-ctrl";
@@ -90,9 +101,13 @@ Example:
 
 		qcom,dsi-phy = <&mdss_dsi_phy0>;
 
-		qcom,dual-panel-mode;
-		qcom,master-panel;
-		qcom,sync-dual-panel;
+		qcom,dual-dsi-mode;
+		qcom,master-dsi;
+		qcom,sync-dual-dsi;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&mdss_dsi_active>;
+		pinctrl-1 = <&mdss_dsi_suspend>;
 
 		panel: panel@0 {
 			compatible = "sharp,lq101r1sx01";
@@ -101,6 +116,18 @@ Example:
 
 			power-supply = <...>;
 			backlight = <...>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+		};
+
+		port {
+			dsi0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
 		};
 	};
 
@@ -117,4 +144,6 @@ Example:
 		clock-names = "iface_clk";
 		clocks = <&mmcc MDSS_AHB_CLK>;
 		vddio-supply = <&pma8084_l12>;
+
+		qcom,dsi-phy-regulator-ldo-mode;
 	};

Documentation/devicetree/bindings/drm/msm/hdmi.txt

@@ -2,8 +2,9 @@ Qualcomm adreno/snapdragon hdmi output
 
 Required properties:
 - compatible: one of the following
+   * "qcom,hdmi-tx-8994"
    * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8074"
+   * "qcom,hdmi-tx-8974"
    * "qcom,hdmi-tx-8660"
    * "qcom,hdmi-tx-8960"
 - reg: Physical base address and length of the controller's registers

drivers/gpu/drm/msm/Kconfig

@@ -9,6 +9,7 @@ config DRM_MSM
 	select DRM_PANEL
 	select SHMEM
 	select TMPFS
+	select QCOM_SCM
 	default y
 	help
 	  DRM/KMS driver for MSM/snapdragon.
@@ -53,3 +54,17 @@ config DRM_MSM_DSI_PLL
 	help
 	  Choose this option to enable DSI PLL driver which provides DSI
 	  source clocks under common clock framework.
+
+config DRM_MSM_DSI_28NM_PHY
+	bool "Enable DSI 28nm PHY driver in MSM DRM"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if the 28nm DSI PHY is used on the platform.
+
+config DRM_MSM_DSI_20NM_PHY
+	bool "Enable DSI 20nm PHY driver in MSM DRM"
+	depends on DRM_MSM_DSI
+	default y
+	help
+	  Choose this option if the 20nm DSI PHY is used on the platform.

drivers/gpu/drm/msm/Makefile

@@ -1,5 +1,5 @@
 ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
-ccflags-$(CONFIG_DRM_MSM_DSI_PLL) += -Idrivers/gpu/drm/msm/dsi
+ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -10,6 +10,7 @@ msm-y := \
 	hdmi/hdmi_audio.o \
 	hdmi/hdmi_bridge.o \
 	hdmi/hdmi_connector.o \
+	hdmi/hdmi_hdcp.o \
 	hdmi/hdmi_i2c.o \
 	hdmi/hdmi_phy_8960.o \
 	hdmi/hdmi_phy_8x60.o \
@@ -53,12 +54,18 @@ msm-$(CONFIG_DRM_MSM_FBDEV) += msm_fbdev.o
 msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
 
 msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
+			dsi/dsi_cfg.o \
 			dsi/dsi_host.o \
 			dsi/dsi_manager.o \
-			dsi/dsi_phy.o \
+			dsi/phy/dsi_phy.o \
 			mdp/mdp5/mdp5_cmd_encoder.o
 
-msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \
-				dsi/pll/dsi_pll_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/phy/dsi_phy_28nm.o
+msm-$(CONFIG_DRM_MSM_DSI_20NM_PHY) += dsi/phy/dsi_phy_20nm.o
+
+ifeq ($(CONFIG_DRM_MSM_DSI_PLL),y)
+msm-y += dsi/pll/dsi_pll.o
+msm-$(CONFIG_DRM_MSM_DSI_28NM_PHY) += dsi/pll/dsi_pll_28nm.o
+endif
 
 obj-$(CONFIG_DRM_MSM)	+= msm.o

drivers/gpu/drm/msm/adreno/a2xx.xml.h

@@ -8,15 +8,15 @@ This file was generated by the rules-ng-ng headergen tool in this git repository
 git clone https://github.com/freedreno/envytools.git
 
 The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/adreno.xml               (    364 bytes, from 2013-11-30 14:47:15)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2014-06-02 15:21:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2014-11-13 22:44:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14895 bytes, from 2015-04-19 15:23:28)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  66709 bytes, from 2015-04-12 18:16:35)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  60633 bytes, from 2015-05-20 14:48:19)
-
-Copyright (C) 2013-2014 by the following authors:
+- /home/robclark/src/freedreno/envytools/rnndb/adreno.xml               (    364 bytes, from 2015-05-20 20:03:07)
+- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2015-05-20 20:03:07)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2015-05-20 20:03:14)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2015-05-20 20:03:14)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14968 bytes, from 2015-05-20 20:12:27)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  67120 bytes, from 2015-08-14 23:22:03)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  63785 bytes, from 2015-08-14 18:27:06)
+
+Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
 
 Permission is hereby granted, free of charge, to any person obtaining

drivers/gpu/drm/msm/adreno/a3xx.xml.h

@@ -8,13 +8,13 @@ This file was generated by the rules-ng-ng headergen tool in this git repository
 git clone https://github.com/freedreno/envytools.git
 
 The rules-ng-ng source files this header was generated from are:
-- /home/robclark/src/freedreno/envytools/rnndb/adreno.xml               (    364 bytes, from 2013-11-30 14:47:15)
-- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2013-03-31 16:51:27)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2014-06-02 15:21:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2014-11-13 22:44:30)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14895 bytes, from 2015-04-19 15:23:28)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  66709 bytes, from 2015-04-12 18:16:35)
-- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  60633 bytes, from 2015-05-20 14:48:19)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno.xml               (    364 bytes, from 2015-05-20 20:03:07)
+- /home/robclark/src/freedreno/envytools/rnndb/freedreno_copyright.xml  (   1453 bytes, from 2015-05-20 20:03:07)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a2xx.xml          (  32901 bytes, from 2015-05-20 20:03:14)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_common.xml (  10551 bytes, from 2015-05-20 20:03:14)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/adreno_pm4.xml    (  14968 bytes, from 2015-05-20 20:12:27)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a3xx.xml          (  67120 bytes, from 2015-08-14 23:22:03)
+- /home/robclark/src/freedreno/envytools/rnndb/adreno/a4xx.xml          (  63785 bytes, from 2015-08-14 18:27:06)
 
 Copyright (C) 2013-2015 by the following authors:
 - Rob Clark <robdclark@gmail.com> (robclark)
@@ -326,6 +326,13 @@ enum a3xx_tex_type {
 	A3XX_TEX_3D = 3,
 };
 
+enum a3xx_tex_msaa {
+	A3XX_TPL1_MSAA1X = 0,
+	A3XX_TPL1_MSAA2X = 1,
+	A3XX_TPL1_MSAA4X = 2,
+	A3XX_TPL1_MSAA8X = 3,
+};
+
 #define A3XX_INT0_RBBM_GPU_IDLE					0x00000001
 #define A3XX_INT0_RBBM_AHB_ERROR				0x00000002
 #define A3XX_INT0_RBBM_REG_TIMEOUT				0x00000004
@@ -2652,6 +2659,7 @@ static inline uint32_t A3XX_VGT_DRAW_INITIATOR_NUM_INSTANCES(uint32_t val)
 #define REG_A3XX_VGT_IMMED_DATA					0x000021fd
 
 #define REG_A3XX_TEX_SAMP_0					0x00000000
+#define A3XX_TEX_SAMP_0_CLAMPENABLE				0x00000001
 #define A3XX_TEX_SAMP_0_MIPFILTER_LINEAR			0x00000002
 #define A3XX_TEX_SAMP_0_XY_MAG__MASK				0x0000000c
 #define A3XX_TEX_SAMP_0_XY_MAG__SHIFT				2
@@ -2695,6 +2703,7 @@ static inline uint32_t A3XX_TEX_SAMP_0_COMPARE_FUNC(enum adreno_compare_func val
 {
 	return ((val) << A3XX_TEX_SAMP_0_COMPARE_FUNC__SHIFT) & A3XX_TEX_SAMP_0_COMPARE_FUNC__MASK;
 }
+#define A3XX_TEX_SAMP_0_CUBEMAPSEAMLESSFILTOFF			0x01000000
 #define A3XX_TEX_SAMP_0_UNNORM_COORDS				0x80000000
 
 #define REG_A3XX_TEX_SAMP_1					0x00000001
@@ -2750,6 +2759,12 @@ static inline uint32_t A3XX_TEX_CONST_0_MIPLVLS(uint32_t val)
 {
 	return ((val) << A3XX_TEX_CONST_0_MIPLVLS__SHIFT) & A3XX_TEX_CONST_0_MIPLVLS__MASK;
 }
+#define A3XX_TEX_CONST_0_MSAATEX__MASK				0x00300000
+#define A3XX_TEX_CONST_0_MSAATEX__SHIFT				20
+static inline uint32_t A3XX_TEX_CONST_0_MSAATEX(enum a3xx_tex_msaa val)
+{
+	return ((val) << A3XX_TEX_CONST_0_MSAATEX__SHIFT) & A3XX_TEX_CONST_0_MSAATEX__MASK;
+}
 #define A3XX_TEX_CONST_0_FMT__MASK				0x1fc00000
 #define A3XX_TEX_CONST_0_FMT__SHIFT				22
 static inline uint32_t A3XX_TEX_CONST_0_FMT(enum a3xx_tex_fmt val)
@@ -2785,7 +2800,7 @@ static inline uint32_t A3XX_TEX_CONST_1_FETCHSIZE(enum a3xx_tex_fetchsize val)
 }
 
 #define REG_A3XX_TEX_CONST_2					0x00000002
-#define A3XX_TEX_CONST_2_INDX__MASK				0x000000ff
+#define A3XX_TEX_CONST_2_INDX__MASK				0x000001ff
 #define A3XX_TEX_CONST_2_INDX__SHIFT				0
 static inline uint32_t A3XX_TEX_CONST_2_INDX(uint32_t val)
 {
@@ -2805,7 +2820,7 @@ static inline uint32_t A3XX_TEX_CONST_2_SWAP(enum a3xx_color_swap val)
 }
 
 #define REG_A3XX_TEX_CONST_3					0x00000003
-#define A3XX_TEX_CONST_3_LAYERSZ1__MASK				0x00007fff
+#define A3XX_TEX_CONST_3_LAYERSZ1__MASK				0x0001ffff
 #define A3XX_TEX_CONST_3_LAYERSZ1__SHIFT			0
 static inline uint32_t A3XX_TEX_CONST_3_LAYERSZ1(uint32_t val)
 {