Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/ke…

…rnel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
    of Intel Thunderbolt support on systems that use ACPI for signalling
    Thunderbolt hotplug events.  This also should make ACPIPHP work in
    some cases in which it was known to have problems.  From
    Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.

 2) ACPI core code cleanups and dock station support cleanups from
    Jiang Liu and Rafael J Wysocki.

 3) Fixes for locking problems related to ACPI device hotplug from
    Rafael J Wysocki.

 4) ACPICA update to version 20130725 includig fixes, cleanups, support
    for more than 256 GPEs per GPE block and a change to make the ACPI
    PM Timer optional (we've seen systems without the PM Timer in the
    field already).  One of the fixes, related to the DeRefOf operator,
    is necessary to prevent some Windows 8 oriented AML from causing
    problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.

 5) Removal of the old and long deprecated /proc/acpi/event interface
    and related driver changes from Thomas Renninger.

 6) ACPI and Xen changes to make the reduced hardware sleep work with
    the latter from Ben Guthro.

 7) ACPI video driver cleanups and a blacklist of systems that should
    not tell the BIOS that they are compatible with Windows 8 (or ACPI
    backlight and possibly other things will not work on them).  From
    Felipe Contreras.

 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
    Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
    Toshi Kani, and Wei Yongjun.

 9) cpufreq ondemand governor target frequency selection change to
    reduce oscillations between min and max frequencies (essentially,
    it causes the governor to choose target frequencies proportional
    to load) from Stratos Karafotis.

10) cpufreq fixes allowing sysfs attributes file permissions to be
    preserved over suspend/resume cycles Srivatsa S Bhat.

11) Removal of Device Tree parsing for CPU device nodes from multiple
    cpufreq drivers that required some changes related to
    of_get_cpu_node() to be made in a few architectures and in the
    driver core.  From Sudeep KarkadaNagesha.

12) cpufreq core fixes and cleanups related to mutual exclusion and
    driver module references from Viresh Kumar, Lukasz Majewski and
    Rafael J Wysocki.

13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
    Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
    Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
    Stratos Karafotis, and Viresh Kumar.

14) Fixes to prevent race conditions in coupled cpuidle from happening
    from Colin Cross.

15) cpuidle core fixes and cleanups from Daniel Lezcano and
    Tuukka Tikkanen.

16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
    Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
    and Sahara.

17) System sleep tracing changes from Todd E Brandt and Shuah Khan.

18) PNP subsystem conversion to using struct dev_pm_ops for power
    management from Shuah Khan.

* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpuidle: coupled: fix race condition between pokes and safe state
  cpuidle: coupled: abort idle if pokes are pending
  cpuidle: coupled: disable interrupts after entering safe state
  ACPI / hotplug: Remove containers synchronously
  driver core / ACPI: Avoid device hot remove locking issues
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
  ACPI / thermal: Add check of "_TZD" availability and evaluating result
  cpufreq: imx6q: Fix clock enable balance
  ACPI: blacklist win8 OSI for buggy laptops
  cpufreq: tegra: fix the wrong clock name
  cpuidle: Change struct menu_device field types
  cpuidle: Add a comment warning about possible overflow
  cpuidle: Fix variable domains in get_typical_interval()
  cpuidle: Fix menu_device->intervals type
  cpuidle: CodingStyle: Break up multiple assignments on single line
  cpuidle: Check called function parameter in get_typical_interval()
  ...

Documentation/cpu-freq/cpu-drivers.txt

@@ -50,8 +50,6 @@ What shall this struct cpufreq_driver contain?
 
 cpufreq_driver.name -		The name of this driver.
 
-cpufreq_driver.owner -		THIS_MODULE;
-
 cpufreq_driver.init -		A pointer to the per-CPU initialization 
 				function.
 

Documentation/kernel-parameters.txt

@@ -235,10 +235,61 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: To spoof as Windows 98: ="Microsoft Windows"
 
 	acpi_osi=	[HW,ACPI] Modify list of supported OS interface strings
-			acpi_osi="string1"	# add string1 -- only one string
-			acpi_osi="!string2"	# remove built-in string2
+			acpi_osi="string1"	# add string1
+			acpi_osi="!string2"	# remove string2
+			acpi_osi=!*		# remove all strings
+			acpi_osi=!		# disable all built-in OS vendor
+						  strings
 			acpi_osi=		# disable all strings
 
+			'acpi_osi=!' can be used in combination with single or
+			multiple 'acpi_osi="string1"' to support specific OS
+			vendor string(s).  Note that such command can only
+			affect the default state of the OS vendor strings, thus
+			it cannot affect the default state of the feature group
+			strings and the current state of the OS vendor strings,
+			specifying it multiple times through kernel command line
+			is meaningless.  This command is useful when one do not
+			care about the state of the feature group strings which
+			should be controlled by the OSPM.
+			Examples:
+			  1. 'acpi_osi=! acpi_osi="Windows 2000"' is equivalent
+			     to 'acpi_osi="Windows 2000" acpi_osi=!', they all
+			     can make '_OSI("Windows 2000")' TRUE.
+
+			'acpi_osi=' cannot be used in combination with other
+			'acpi_osi=' command lines, the _OSI method will not
+			exist in the ACPI namespace.  NOTE that such command can
+			only affect the _OSI support state, thus specifying it
+			multiple times through kernel command line is also
+			meaningless.
+			Examples:
+			  1. 'acpi_osi=' can make 'CondRefOf(_OSI, Local1)'
+			     FALSE.
+
+			'acpi_osi=!*' can be used in combination with single or
+			multiple 'acpi_osi="string1"' to support specific
+			string(s).  Note that such command can affect the
+			current state of both the OS vendor strings and the
+			feature group strings, thus specifying it multiple times
+			through kernel command line is meaningful.  But it may
+			still not able to affect the final state of a string if
+			there are quirks related to this string.  This command
+			is useful when one want to control the state of the
+			feature group strings to debug BIOS issues related to
+			the OSPM features.
+			Examples:
+			  1. 'acpi_osi="Module Device" acpi_osi=!*' can make
+			     '_OSI("Module Device")' FALSE.
+			  2. 'acpi_osi=!* acpi_osi="Module Device"' can make
+			     '_OSI("Module Device")' TRUE.
+			  3. 'acpi_osi=! acpi_osi=!* acpi_osi="Windows 2000"' is
+			     equivalent to
+			     'acpi_osi=!* acpi_osi=! acpi_osi="Windows 2000"'
+			     and
+			     'acpi_osi=!* acpi_osi="Windows 2000" acpi_osi=!',
+			     they all will make '_OSI("Windows 2000")' TRUE.
+
 	acpi_pm_good	[X86]
 			Override the pmtimer bug detection: force the kernel
 			to assume that this machine's pmtimer latches its value

Documentation/laptops/asus-laptop.txt

@@ -8,8 +8,8 @@ http://acpi4asus.sf.net/
 
  This driver provides support for extra features of ACPI-compatible ASUS laptops.
  It may also support some MEDION, JVC or VICTOR laptops (such as MEDION 9675 or
- VICTOR XP7210 for example). It makes all the extra buttons generate standard
- ACPI events that go through /proc/acpi/events and input events (like keyboards).
+ VICTOR XP7210 for example). It makes all the extra buttons generate input
+ events (like keyboards).
  On some models adds support for changing the display brightness and output,
  switching the LCD backlight on and off, and most importantly, allows you to
  blink those fancy LEDs intended for reporting mail and wireless status.
@@ -55,8 +55,8 @@ Usage
   DSDT) to me.
 
   That's all, now, all the events generated by the hotkeys of your laptop
-  should be reported in your /proc/acpi/event entry. You can check with
-  "acpi_listen".
+  should be reported via netlink events. You can check with
+  "acpi_genl monitor" (part of the acpica project).
 
   Hotkeys are also reported as input keys (like keyboards) you can check
   which key are supported using "xev" under X11.

Documentation/laptops/sony-laptop.txt

@@ -12,10 +12,10 @@ Fn keys (hotkeys):
 ------------------
 Some models report hotkeys through the SNC or SPIC devices, such events are
 reported both through the ACPI subsystem as acpi events and through the INPUT
-subsystem. See the logs of acpid or /proc/acpi/event and
-/proc/bus/input/devices to find out what those events are and which input
-devices are created by the driver. Additionally, loading the driver with the
-debug option will report all events in the kernel log.
+subsystem. See the logs of /proc/bus/input/devices to find out what those
+events are and which input devices are created by the driver.
+Additionally, loading the driver with the debug option will report all events
+in the kernel log.
 
 The "scancodes" passed to the input system (that can be remapped with udev)
 are indexes to the table "sony_laptop_input_keycode_map" in the sony-laptop.c

Documentation/laptops/thinkpad-acpi.txt

@@ -329,20 +329,6 @@ sysfs notes:
 
 		This attribute has poll()/select() support.
 
-	hotkey_report_mode:
-		Returns the state of the procfs ACPI event report mode
-		filter for hot keys.  If it is set to 1 (the default),
-		all hot key presses are reported both through the input
-		layer and also as ACPI events through procfs (but not
-		through netlink).  If it is set to 2, hot key presses
-		are reported only through the input layer.
-
-		This attribute is read-only in kernels 2.6.23 or later,
-		and read-write on earlier kernels.
-
-		May return -EPERM (write access locked out by module
-		parameter) or -EACCES (read-only).
-
 	wakeup_reason:
 		Set to 1 if the system is waking up because the user
 		requested a bay ejection.  Set to 2 if the system is
@@ -518,24 +504,21 @@ SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 Non hotkey ACPI HKEY event map:
 -------------------------------
 
-Events that are not propagated by the driver, except for legacy
-compatibility purposes when hotkey_report_mode is set to 1:
-
-0x5001		Lid closed
-0x5002		Lid opened
-0x5009		Tablet swivel: switched to tablet mode
-0x500A		Tablet swivel: switched to normal mode
-0x7000		Radio Switch may have changed state
-
 Events that are never propagated by the driver:
 
 0x2304		System is waking up from suspend to undock
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
+0x5001		Lid closed
+0x5002		Lid opened
+0x5009		Tablet swivel: switched to tablet mode
+0x500A		Tablet swivel: switched to normal mode
 0x5010		Brightness level changed/control event
 0x6000		KEYBOARD: Numlock key pressed
 0x6005		KEYBOARD: Fn key pressed (TO BE VERIFIED)
+0x7000		Radio Switch may have changed state
+
 
 Events that are propagated by the driver to userspace:
 
@@ -574,50 +557,6 @@ operating system is to force either an immediate suspend or hibernate
 cycle, or a system shutdown.  Obviously, something is very wrong if this
 happens.
 
-Compatibility notes:
-
-ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
-supported the input layer, and sent events over the procfs ACPI event
-interface.
-
-To avoid sending duplicate events over the input layer and the ACPI
-event interface, thinkpad-acpi 0.16 implements a module parameter
-(hotkey_report_mode), and also a sysfs device attribute with the same
-name.
-
-Make no mistake here: userspace is expected to switch to using the input
-layer interface of thinkpad-acpi, together with the ACPI netlink event
-interface in kernels 2.6.23 and later, or with the ACPI procfs event
-interface in kernels 2.6.22 and earlier.
-
-If no hotkey_report_mode module parameter is specified (or it is set to
-zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22
-and earlier, also allows one to change the hotkey_report_mode through
-sysfs.  In kernels 2.6.23 and later, where the netlink ACPI event
-interface is available, hotkey_report_mode cannot be changed through
-sysfs (it is read-only).
-
-If the hotkey_report_mode module parameter is set to 1 or 2, it cannot
-be changed later through sysfs (any writes will return -EPERM to signal
-that hotkey_report_mode was locked.  On 2.6.23 and later, where
-hotkey_report_mode cannot be changed at all, writes will return -EACCES).
-
-hotkey_report_mode set to 1 makes the driver export through the procfs
-ACPI event interface all hot key presses (which are *also* sent to the
-input layer).  This is a legacy compatibility behaviour, and it is also
-the default mode of operation for the driver.
-
-hotkey_report_mode set to 2 makes the driver filter out the hot key
-presses from the procfs ACPI event interface, so these events will only
-be sent through the input layer.  Userspace that has been updated to use
-the thinkpad-acpi input layer interface should set hotkey_report_mode to
-2.
-
-Hot key press events are never sent to the ACPI netlink event interface.
-Really up-to-date userspace under kernel 2.6.23 and later is to use the
-netlink interface and the input layer interface, and don't bother at all
-with hotkey_report_mode.
-
 
 Brightness hotkey notes:
 

arch/arm/kernel/devtree.c

@@ -169,6 +169,11 @@ void __init arm_dt_init_cpu_maps(void)
 	}
 }
 
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
+{
+	return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu);
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt_phys: physical address of dt blob

arch/arm/kernel/topology.c

@@ -74,12 +74,8 @@ struct cpu_efficiency table_efficiency[] = {
 	{NULL, },
 };
 
-struct cpu_capacity {
-	unsigned long hwid;
-	unsigned long capacity;
-};
-
-struct cpu_capacity *cpu_capacity;
+unsigned long *__cpu_capacity;
+#define cpu_capacity(cpu)	__cpu_capacity[cpu]
 
 unsigned long middle_capacity = 1;
 
@@ -100,15 +96,19 @@ static void __init parse_dt_topology(void)
 	unsigned long capacity = 0;
 	int alloc_size, cpu = 0;
 
-	alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity);
-	cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
+	alloc_size = nr_cpu_ids * sizeof(*__cpu_capacity);
+	__cpu_capacity = kzalloc(alloc_size, GFP_NOWAIT);
 
-	while ((cn = of_find_node_by_type(cn, "cpu"))) {
-		const u32 *rate, *reg;
+	for_each_possible_cpu(cpu) {
+		const u32 *rate;
 		int len;
 
-		if (cpu >= num_possible_cpus())
-			break;
+		/* too early to use cpu->of_node */
+		cn = of_get_cpu_node(cpu, NULL);
+		if (!cn) {
+			pr_err("missing device node for CPU %d\n", cpu);
+			continue;
+		}
 
 		for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++)
 			if (of_device_is_compatible(cn, cpu_eff->compatible))
@@ -124,12 +124,6 @@ static void __init parse_dt_topology(void)
 			continue;
 		}
 
-		reg = of_get_property(cn, "reg", &len);
-		if (!reg || len != 4) {
-			pr_err("%s missing reg property\n", cn->full_name);
-			continue;
-		}
-
 		capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
 
 		/* Save min capacity of the system */
@@ -140,23 +134,17 @@ static void __init parse_dt_topology(void)
 		if (capacity > max_capacity)
 			max_capacity = capacity;
 
-		cpu_capacity[cpu].capacity = capacity;
-		cpu_capacity[cpu++].hwid = be32_to_cpup(reg);
+		cpu_capacity(cpu) = capacity;
 	}
 
-	if (cpu < num_possible_cpus())
-		cpu_capacity[cpu].hwid = (unsigned long)(-1);
-
 	/* If min and max capacities are equals, we bypass the update of the
 	 * cpu_scale because all CPUs have the same capacity. Otherwise, we
 	 * compute a middle_capacity factor that will ensure that the capacity
 	 * of an 'average' CPU of the system will be as close as possible to
 	 * SCHED_POWER_SCALE, which is the default value, but with the
 	 * constraint explained near table_efficiency[].
 	 */
-	if (min_capacity == max_capacity)
-		cpu_capacity[0].hwid = (unsigned long)(-1);
-	else if (4*max_capacity < (3*(max_capacity + min_capacity)))
+	if (4*max_capacity < (3*(max_capacity + min_capacity)))
 		middle_capacity = (min_capacity + max_capacity)
 				>> (SCHED_POWER_SHIFT+1);
 	else
@@ -170,31 +158,20 @@ static void __init parse_dt_topology(void)
  * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
  * function returns directly for SMP system.
  */
-void update_cpu_power(unsigned int cpu, unsigned long hwid)
+void update_cpu_power(unsigned int cpu)
 {
-	unsigned int idx = 0;
-
-	/* look for the cpu's hwid in the cpu capacity table */
-	for (idx = 0; idx < num_possible_cpus(); idx++) {
-		if (cpu_capacity[idx].hwid == hwid)
-			break;
-
-		if (cpu_capacity[idx].hwid == -1)
-			return;
-	}
-
-	if (idx == num_possible_cpus())
+	if (!cpu_capacity(cpu))
 		return;
 
-	set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity);
+	set_power_scale(cpu, cpu_capacity(cpu) / middle_capacity);
 
 	printk(KERN_INFO "CPU%u: update cpu_power %lu\n",
 		cpu, arch_scale_freq_power(NULL, cpu));
 }
 
 #else
 static inline void parse_dt_topology(void) {}
-static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
+static inline void update_cpu_power(unsigned int cpuid) {}
 #endif
 
  /*
@@ -281,7 +258,7 @@ void store_cpu_topology(unsigned int cpuid)
 
 	update_siblings_masks(cpuid);
 
-	update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK);
+	update_cpu_power(cpuid);
 
 	printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
 		cpuid, cpu_topology[cpuid].thread_id,

arch/arm/mach-davinci/cpuidle.c

@@ -65,7 +65,7 @@ static struct cpuidle_driver davinci_idle_driver = {
 	.states[1]		= {
 		.enter			= davinci_enter_idle,
 		.exit_latency		= 10,
-		.target_residency	= 100000,
+		.target_residency	= 10000,
 		.flags			= CPUIDLE_FLAG_TIME_VALID,
 		.name			= "DDR SR",
 		.desc			= "WFI and DDR Self Refresh",

arch/arm/mach-imx/mach-imx6q.c

@@ -254,13 +254,12 @@ static void __init imx6q_opp_init(struct device *cpu_dev)
 {
 	struct device_node *np;
 
-	np = of_find_node_by_path("/cpus/cpu@0");
+	np = of_node_get(cpu_dev->of_node);
 	if (!np) {
 		pr_warn("failed to find cpu0 node\n");
 		return;
 	}
 
-	cpu_dev->of_node = np;
 	if (of_init_opp_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;