---

yaml --- r: 293507 b: refs/heads/master c: cb3f2ad h: refs/heads/master i: 293505: 1fb7bcd 293503: f9b1b15 v: v3
git-mirror · Mar 18, 2012 · 506a378 · 506a378
1 parent 9fedd9c
commit 506a378
Show file tree

Hide file tree

Showing 68 changed files with 2,506 additions and 5,202 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 828006de1bddf83b6ecf03ec459c15f7c7c22db7
+refs/heads/master: cb3f2adc03ab055b19c677a6283523861fafebdd
diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -860,7 +860,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     [Multiple options for each card instance]
     model	- force the model name
-    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
+    position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF,
+    		   3 = VIACOMBO, 4 = COMBO)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
     		  When the bit 8 (0x100) is set, the lower 8 bits are used
 		  as the "fixed" codec slots; i.e. the driver probes the
@@ -925,6 +926,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	    (Usually SD_LPIB register is more accurate than the
 	    position buffer.)
 
+	    position_fix=3 is specific to VIA devices.  The position
+	    of the capture stream is checked from both LPIB and POSBUF
+	    values.  position_fix=4 is a combination mode, using LPIB
+	    for playback and POSBUF for capture.
+
     NB: If you get many "azx_get_response timeout" messages at
     loading, it's likely a problem of interrupts (e.g. ACPI irq
     routing).  Try to boot with options like "pci=noacpi".  Also, you

diff --git a/trunk/Documentation/sound/alsa/HD-Audio-Models.txt b/trunk/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -8,37 +8,10 @@ ALC880
   5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
   6stack	6-jack in back, 2-jack in front
   6stack-digout	6-jack with a SPDIF out
-  w810		3-jack
-  z71v		3-jack (HP shared SPDIF)
-  asus		3-jack (ASUS Mobo)
-  asus-w1v	ASUS W1V
-  asus-dig	ASUS with SPDIF out
-  asus-dig2	ASUS with SPDIF out (using GPIO2)
-  uniwill	3-jack
-  fujitsu	Fujitsu Laptops (Pi1536)
-  F1734		2-jack
-  lg		LG laptop (m1 express dual)
-  lg-lw		LG LW20/LW25 laptop
-  tcl		TCL S700
-  clevo		Clevo laptops (m520G, m665n)
-  medion	Medion Rim 2150
-  test		for testing/debugging purpose, almost all controls can be
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
 
 ALC260
 ======
-  fujitsu	Fujitsu S7020
-  acer		Acer TravelMate
-  will		Will laptops (PB V7900)
-  replacer	Replacer 672V
-  favorit100	Maxdata Favorit 100XS
-  basic		fixed pin assignment (old default model)
-  test		for testing/debugging purpose, almost all controls can
-		adjusted.  Appearing only when compiled with
-		$CONFIG_SND_DEBUG=y
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC262
 ======
@@ -70,55 +43,7 @@ ALC680
 
 ALC882/883/885/888/889
 ======================
-  3stack-dig	3-jack with SPDIF I/O
-  6stack-dig	6-jack digital with SPDIF I/O
-  arima		Arima W820Di1
-  targa		Targa T8, MSI-1049 T8
-  asus-a7j	ASUS A7J
-  asus-a7m	ASUS A7M
-  macpro	MacPro support
-  mb5		Macbook 5,1
-  macmini3	Macmini 3,1
-  mba21		Macbook Air 2,1
-  mbp3		Macbook Pro rev3
-  imac24	iMac 24'' with jack detection
-  imac91	iMac 9,1
-  w2jc		ASUS W2JC
-  3stack-2ch-dig	3-jack with SPDIF I/O (ALC883)
-  alc883-6stack-dig	6-jack digital with SPDIF I/O (ALC883)
-  3stack-6ch    3-jack 6-channel
-  3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
-  6stack-dig-demo  6-jack digital for Intel demo board
-  acer		Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
-  acer-aspire	Acer Aspire 9810
-  acer-aspire-4930g Acer Aspire 4930G
-  acer-aspire-6530g Acer Aspire 6530G
-  acer-aspire-7730g Acer Aspire 7730G
-  acer-aspire-8930g Acer Aspire 8930G
-  medion	Medion Laptops
-  targa-dig	Targa/MSI
-  targa-2ch-dig	Targa/MSI with 2-channel
-  targa-8ch-dig Targa/MSI with 8-channel (MSI GX620)
-  laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
-  lenovo-101e	Lenovo 101E
-  lenovo-nb0763	Lenovo NB0763
-  lenovo-ms7195-dig Lenovo MS7195
-  lenovo-sky	Lenovo Sky
-  haier-w66	Haier W66
-  3stack-hp	HP machines with 3stack (Lucknow, Samba boards)
-  6stack-dell	Dell machines with 6stack (Inspiron 530)
-  mitac		Mitac 8252D
-  clevo-m540r	Clevo M540R (6ch + digital)
-  clevo-m720	Clevo M720 laptop series
-  fujitsu-pi2515 Fujitsu AMILO Pi2515
-  fujitsu-xa3530 Fujitsu AMILO XA3530
-  3stack-6ch-intel Intel DG33* boards
-  intel-alc889a	Intel IbexPeak with ALC889A
-  intel-x58	Intel DX58 with ALC889
-  asus-p5q	ASUS P5Q-EM boards
-  mb31		MacBook 3,1
-  sony-vaio-tt  Sony VAIO TT
-  auto		auto-config reading BIOS (default)
+  N/A
 
 ALC861/660
 ==========

diff --git a/trunk/Documentation/sound/alsa/HD-Audio.txt b/trunk/Documentation/sound/alsa/HD-Audio.txt
@@ -59,7 +59,12 @@ a case, you can change the default method via `position_fix` option.
 `position_fix=1` means to use LPIB method explicitly.
 `position_fix=2` means to use the position-buffer.
 `position_fix=3` means to use a combination of both methods, needed
-for some VIA and ATI controllers.  0 is the default value for all other
+for some VIA controllers.  The capture stream position is corrected
+by comparing both LPIB and position-buffer values.
+`position_fix=4` is another combination available for all controllers,
+and uses LPIB for the playback and the position-buffer for the capture
+streams.
+0 is the default value for all other
 controllers, the automatic check and fallback to LPIB as described in
 the above.  If you get a problem of repeated sounds, this option might
 help.

diff --git a/trunk/include/sound/control.h b/trunk/include/sound/control.h
@@ -227,6 +227,11 @@ snd_ctl_add_slave_uncached(struct snd_kcontrol *master,
 	return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE);
 }
 
+int snd_ctl_add_vmaster_hook(struct snd_kcontrol *kctl,
+			     void (*hook)(void *private_data, int),
+			     void *private_data);
+void snd_ctl_sync_vmaster_hook(struct snd_kcontrol *kctl);
+
 /*
  * Helper functions for jack-detection controls
  */

diff --git a/trunk/include/sound/pcm.h b/trunk/include/sound/pcm.h
@@ -264,7 +264,7 @@ struct snd_pcm_hw_constraint_ratdens {
 
 struct snd_pcm_hw_constraint_list {
 	unsigned int count;
-	unsigned int *list;
+	const unsigned int *list;
 	unsigned int mask;
 };
 
@@ -785,7 +785,8 @@ void snd_interval_muldivk(const struct snd_interval *a, const struct snd_interva
 			  unsigned int k, struct snd_interval *c);
 void snd_interval_mulkdiv(const struct snd_interval *a, unsigned int k,
 			  const struct snd_interval *b, struct snd_interval *c);
-int snd_interval_list(struct snd_interval *i, unsigned int count, unsigned int *list, unsigned int mask);
+int snd_interval_list(struct snd_interval *i, unsigned int count,
+		      const unsigned int *list, unsigned int mask);
 int snd_interval_ratnum(struct snd_interval *i,
 			unsigned int rats_count, struct snd_ratnum *rats,
 			unsigned int *nump, unsigned int *denp);

diff --git a/trunk/include/sound/version.h b/trunk/include/sound/version.h
@@ -1,3 +1,3 @@
 /* include/version.h */
-#define CONFIG_SND_VERSION "1.0.24"
+#define CONFIG_SND_VERSION "1.0.25"
 #define CONFIG_SND_DATE ""
diff --git a/trunk/include/sound/ymfpci.h b/trunk/include/sound/ymfpci.h
@@ -366,6 +366,8 @@ struct snd_ymfpci {
 #ifdef CONFIG_PM
 	u32 *saved_regs;
 	u32 saved_ydsxgr_mode;
+	u16 saved_dsxg_legacy;
+	u16 saved_dsxg_elegacy;
 #endif
 };
 

diff --git a/trunk/sound/aoa/codecs/onyx.c b/trunk/sound/aoa/codecs/onyx.c
@@ -1132,15 +1132,4 @@ static struct i2c_driver onyx_driver = {
 	.id_table = onyx_i2c_id,
 };
 
-static int __init onyx_init(void)
-{
-	return i2c_add_driver(&onyx_driver);
-}
-
-static void __exit onyx_exit(void)
-{
-	i2c_del_driver(&onyx_driver);
-}
-
-module_init(onyx_init);
-module_exit(onyx_exit);
+module_i2c_driver(onyx_driver);
diff --git a/trunk/sound/aoa/codecs/tas.c b/trunk/sound/aoa/codecs/tas.c
@@ -1026,15 +1026,4 @@ static struct i2c_driver tas_driver = {
 	.id_table = tas_i2c_id,
 };
 
-static int __init tas_init(void)
-{
-	return i2c_add_driver(&tas_driver);
-}
-
-static void __exit tas_exit(void)
-{
-	i2c_del_driver(&tas_driver);
-}
-
-module_init(tas_init);
-module_exit(tas_exit);
+module_i2c_driver(tas_driver);
diff --git a/trunk/sound/core/control.c b/trunk/sound/core/control.c
@@ -1313,7 +1313,7 @@ static int snd_ctl_tlv_ioctl(struct snd_ctl_file *file,
 			err = -EPERM;
 			goto __kctl_end;
 		}
-		err = kctl->tlv.c(kctl, op_flag, tlv.length, _tlv->tlv); 
+		err = kctl->tlv.c(kctl, op_flag, tlv.length, _tlv->tlv);
 		if (err > 0) {
 			up_read(&card->controls_rwsem);
 			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_TLV, &kctl->id);