---

yaml
---
r: 265217
b: refs/heads/master
c: 9aa3283
h: refs/heads/master
i:
  265215: cc8580b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 86387e1ac4fcaa45ff5578013a78593d1a0ba279
+refs/heads/master: 9aa3283595451ca093500ff0977b106e1f465586

trunk/MAINTAINERS

@@ -2465,7 +2465,7 @@ EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
 M:	Breno Leitao <leitao@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ehea/
+F:	drivers/net/ethernet/ibm/ehea/
 
 EMBEDDED LINUX
 M:	Paul Gortmaker <paul.gortmaker@windriver.com>
@@ -3163,7 +3163,7 @@ IBM Power Virtual Ethernet Device Driver
 M:	Santiago Leon <santil@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/ibmveth.*
+F:	drivers/net/ethernet/ibm/ibmveth.*
 
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer

trunk/drivers/net/Kconfig

@@ -627,18 +627,6 @@ config IBMLANA
 	  boards with this driver should be possible, but has not been tested
 	  up to now due to lack of hardware.
 
-config IBMVETH
-	tristate "IBM LAN Virtual Ethernet support"
-	depends on PPC_PSERIES
-	---help---
-	  This driver supports virtual ethernet adapters on newer IBM iSeries
-	  and pSeries systems.
-
-	  To compile this driver as a module, choose M here. The module will
-	  be called ibmveth.
-
-source "drivers/net/ibm_newemac/Kconfig"
-
 config NET_PCI
 	bool "EISA, VLB, PCI and on board controllers"
 	depends on ISA || EISA || PCI
@@ -1469,16 +1457,6 @@ if NETDEV_10000
 config MDIO
 	tristate
 
-config EHEA
-	tristate "eHEA Ethernet support"
-	depends on IBMEBUS && INET && SPARSEMEM
-	select INET_LRO
-	---help---
-	  This driver supports the IBM pSeries eHEA ethernet adapter.
-
-	  To compile the driver as a module, choose M here. The module
-	  will be called ehea.
-
 config ENIC
 	tristate "Cisco VIC Ethernet NIC Support"
 	depends on PCI && INET
@@ -1573,10 +1551,6 @@ config XEN_NETDEV_BACKEND
 	  compile this driver as a module, chose M here: the module
 	  will be called xen-netback.
 
-config ISERIES_VETH
-	tristate "iSeries Virtual Ethernet driver support"
-	depends on PPC_ISERIES
-
 config RIONET
 	tristate "RapidIO Ethernet over messaging driver support"
 	depends on RAPIDIO

trunk/drivers/net/Makefile

@@ -10,9 +10,7 @@ obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
 obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
 obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
 
-obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
 obj-$(CONFIG_IP1000) += ipg.o
-obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_ATL1) += atlx/
@@ -50,7 +48,6 @@ obj-$(CONFIG_SIS190) += sis190.o
 obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_R6040) += r6040.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
-obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
 obj-$(CONFIG_NATSEMI) += natsemi.o
 obj-$(CONFIG_NS83820) += ns83820.o
 obj-$(CONFIG_FEALNX) += fealnx.o
@@ -148,7 +145,6 @@ obj-$(CONFIG_VETH) += veth.o
 obj-$(CONFIG_NET_NETX) += netx-eth.o
 obj-$(CONFIG_DL2K) += dl2k.o
 obj-$(CONFIG_R8169) += r8169.o
-obj-$(CONFIG_IBMVETH) += ibmveth.o
 obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
 obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
 obj-$(CONFIG_DM9000) += dm9000.o

trunk/drivers/net/ethernet/Kconfig

@@ -19,6 +19,7 @@ source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/emulex/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
+source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"

trunk/drivers/net/ethernet/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/
 obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
+obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
 obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/

trunk/drivers/net/ethernet/ibm/Kconfig

@@ -0,0 +1,47 @@
+#
+# IBM device configuration.
+#
+
+config NET_VENDOR_IBM
+	bool "IBM devices"
+	depends on MCA || PPC_PSERIES || PPC_PSERIES || PPC_DCR || \
+		   (IBMEBUS && INET && SPARSEMEM)
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about IBM devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_IBM
+
+config IBMVETH
+	tristate "IBM LAN Virtual Ethernet support"
+	depends on PPC_PSERIES
+	---help---
+	  This driver supports virtual ethernet adapters on newer IBM iSeries
+	  and pSeries systems.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called ibmveth.
+
+config ISERIES_VETH
+	tristate "iSeries Virtual Ethernet driver support"
+	depends on PPC_ISERIES
+
+source "drivers/net/ethernet/ibm/emac/Kconfig"
+
+config EHEA
+	tristate "eHEA Ethernet support"
+	depends on IBMEBUS && INET && SPARSEMEM
+	select INET_LRO
+	---help---
+	  This driver supports the IBM pSeries eHEA ethernet adapter.
+
+	  To compile the driver as a module, choose M here. The module
+	  will be called ehea.
+
+endif # NET_VENDOR_IBM

trunk/drivers/net/ethernet/ibm/Makefile

@@ -0,0 +1,8 @@
+#
+# Makefile for th IBM network device drivers.
+#
+
+obj-$(CONFIG_IBMVETH) += ibmveth.o
+obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
+obj-$(CONFIG_IBM_EMAC) += emac/
+obj-$(CONFIG_EHEA) += ehea/

trunk/drivers/net/ibm_newemac/Kconfig → trunk/drivers/net/ethernet/ibm/emac/Kconfig

@@ -1,4 +1,4 @@
-config IBM_NEW_EMAC
+config IBM_EMAC
 	tristate "IBM EMAC Ethernet support"
 	depends on PPC_DCR
 	select CRC32
@@ -7,29 +7,29 @@ config IBM_NEW_EMAC
 	  typically found on 4xx embedded PowerPC chips, but also on the
 	  Axon southbridge for Cell.
 
-config IBM_NEW_EMAC_RXB
+config IBM_EMAC_RXB
 	int "Number of receive buffers"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "128"
 
-config IBM_NEW_EMAC_TXB
+config IBM_EMAC_TXB
 	int "Number of transmit buffers"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "64"
 
-config IBM_NEW_EMAC_POLL_WEIGHT
+config IBM_EMAC_POLL_WEIGHT
 	int "MAL NAPI polling weight"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "32"
 
-config IBM_NEW_EMAC_RX_COPY_THRESHOLD
+config IBM_EMAC_RX_COPY_THRESHOLD
 	int "RX skb copy threshold (bytes)"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "256"
 
-config IBM_NEW_EMAC_RX_SKB_HEADROOM
+config IBM_EMAC_RX_SKB_HEADROOM
 	int "Additional RX skb headroom (bytes)"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default "0"
 	help
 	  Additional receive skb headroom. Note, that driver
@@ -39,38 +39,38 @@ config IBM_NEW_EMAC_RX_SKB_HEADROOM
 
 	  If unsure, set to 0.
 
-config IBM_NEW_EMAC_DEBUG
+config IBM_EMAC_DEBUG
 	bool "Debugging"
-	depends on IBM_NEW_EMAC
+	depends on IBM_EMAC
 	default n
 
 # The options below has to be select'ed by the respective
 # processor types or platforms
 
-config IBM_NEW_EMAC_ZMII
+config IBM_EMAC_ZMII
 	bool
 	default n
 
-config IBM_NEW_EMAC_RGMII
+config IBM_EMAC_RGMII
 	bool
 	default n
 
-config IBM_NEW_EMAC_TAH
+config IBM_EMAC_TAH
 	bool
 	default n
 
-config IBM_NEW_EMAC_EMAC4
+config IBM_EMAC_EMAC4
 	bool
 	default n
 
-config IBM_NEW_EMAC_NO_FLOW_CTRL
+config IBM_EMAC_NO_FLOW_CTRL
 	bool
 	default n
 
-config IBM_NEW_EMAC_MAL_CLR_ICINTSTAT
+config IBM_EMAC_MAL_CLR_ICINTSTAT
 	bool
 	default n
 
-config IBM_NEW_EMAC_MAL_COMMON_ERR
+config IBM_EMAC_MAL_COMMON_ERR
 	bool
 	default n