---

yaml --- r: 350177 b: refs/heads/master c: e3f0f36 h: refs/heads/master i: 350175: 0f5dcda v: v3
git-mirror · Jan 24, 2013 · d546846 · d546846
1 parent f389a61
commit d546846
Show file tree

Hide file tree

Showing 906 changed files with 8,534 additions and 16,565 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 266d7ad7f4fe2f44b91561f5b812115c1b3018ab
+refs/heads/master: e3f0f36ddf1b2743a0d4ea312996536a9c37e1c7
diff --git a/trunk/Documentation/ABI/testing/sysfs-bus-event_source-devices-events b/trunk/Documentation/ABI/testing/sysfs-bus-event_source-devices-events
diff --git a/trunk/Documentation/atomic_ops.txt b/trunk/Documentation/atomic_ops.txt
@@ -253,8 +253,6 @@ This performs an atomic exchange operation on the atomic variable v, setting
 the given new value.  It returns the old value that the atomic variable v had
 just before the operation.
 
-atomic_xchg requires explicit memory barriers around the operation.
-
 	int atomic_cmpxchg(atomic_t *v, int old, int new);
 
 This performs an atomic compare exchange operation on the atomic value v,

diff --git a/trunk/Documentation/device-mapper/dm-raid.txt b/trunk/Documentation/device-mapper/dm-raid.txt
@@ -141,4 +141,3 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
-1.3.2   Fix/improve redundancy checking for RAID10
diff --git a/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -81,8 +81,7 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
-  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+  The PERIPH 0 means gpio.
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -127,7 +126,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
 		};
 	};
 };

diff --git a/trunk/Documentation/hid/hid-sensor.txt b/trunk/Documentation/hid/hid-sensor.txt
diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocb_poll	[KNL,BOOT]
+	rcu_nocbs_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

diff --git a/trunk/Documentation/memory-barriers.txt b/trunk/Documentation/memory-barriers.txt
@@ -1685,7 +1685,6 @@ explicit lock operations, described later).  These include:
 
 	xchg();
 	cmpxchg();
-	atomic_xchg();
 	atomic_cmpxchg();
 	atomic_inc_return();
 	atomic_dec_return();

diff --git a/trunk/Documentation/trace/ftrace.txt b/trunk/Documentation/trace/ftrace.txt
@@ -1842,89 +1842,6 @@ an error.
  # cat buffer_size_kb
 85
 
-Snapshot
---------
-CONFIG_TRACER_SNAPSHOT makes a generic snapshot feature
-available to all non latency tracers. (Latency tracers which
-record max latency, such as "irqsoff" or "wakeup", can't use
-this feature, since those are already using the snapshot
-mechanism internally.)
-
-Snapshot preserves a current trace buffer at a particular point
-in time without stopping tracing. Ftrace swaps the current
-buffer with a spare buffer, and tracing continues in the new
-current (=previous spare) buffer.
-
-The following debugfs files in "tracing" are related to this
-feature:
-
-  snapshot:
-
-	This is used to take a snapshot and to read the output
-	of the snapshot. Echo 1 into this file to allocate a
-	spare buffer and to take a snapshot (swap), then read
-	the snapshot from this file in the same format as
-	"trace" (described above in the section "The File
-	System"). Both reads snapshot and tracing are executable
-	in parallel. When the spare buffer is allocated, echoing
-	0 frees it, and echoing else (positive) values clear the
-	snapshot contents.
-	More details are shown in the table below.
-
-	status\input  |     0      |     1      |    else    |
-	--------------+------------+------------+------------+
-	not allocated |(do nothing)| alloc+swap |   EINVAL   |
-	--------------+------------+------------+------------+
-	allocated     |    free    |    swap    |   clear    |
-	--------------+------------+------------+------------+
-
-Here is an example of using the snapshot feature.
-
- # echo 1 > events/sched/enable
- # echo 1 > snapshot
- # cat snapshot
-# tracer: nop
-#
-# entries-in-buffer/entries-written: 71/71   #P:8
-#
-#                              _-----=> irqs-off
-#                             / _----=> need-resched
-#                            | / _---=> hardirq/softirq
-#                            || / _--=> preempt-depth
-#                            ||| /     delay
-#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
-#              | |       |   ||||       |         |
-          <idle>-0     [005] d...  2440.603828: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2242 next_prio=120
-           sleep-2242  [005] d...  2440.603846: sched_switch: prev_comm=snapshot-test-2 prev_pid=2242 prev_prio=120 prev_state=R ==> next_comm=kworker/5:1 next_pid=60 next_prio=120
-[...]
-          <idle>-0     [002] d...  2440.707230: sched_switch: prev_comm=swapper/2 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2229 next_prio=120
-
- # cat trace
-# tracer: nop
-#
-# entries-in-buffer/entries-written: 77/77   #P:8
-#
-#                              _-----=> irqs-off
-#                             / _----=> need-resched
-#                            | / _---=> hardirq/softirq
-#                            || / _--=> preempt-depth
-#                            ||| /     delay
-#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
-#              | |       |   ||||       |         |
-          <idle>-0     [007] d...  2440.707395: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2243 next_prio=120
- snapshot-test-2-2229  [002] d...  2440.707438: sched_switch: prev_comm=snapshot-test-2 prev_pid=2229 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
-[...]
-
-
-If you try to use this snapshot feature when current tracer is
-one of the latency tracers, you will get the following results.
-
- # echo wakeup > current_tracer
- # echo 1 > snapshot
-bash: echo: write error: Device or resource busy
- # cat snapshot
-cat: snapshot: Device or resource busy
-
 -----------
 
 More details can be found in the source code, in the

diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt
@@ -57,10 +57,6 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
-	 	to struct boot_params for for loading bzImage and ramdisk
-		above 4G in 64bit.
-
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -186,7 +182,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	2.12+	xloadflags	Boot protocol option flags
+0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -390,7 +386,6 @@ Protocol:	2.00+
 	F  Special		(0xFF = undefined)
        10  Reserved
        11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
-       12  OVMF UEFI virtualization stack
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.
@@ -587,27 +582,6 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
-Field name:     xloadflags
-Type:           read
-Offset/size:    0x236/2
-Protocol:       2.12+
-
-  This field is a bitmask.
-
-  Bit 0 (read):	XLF_KERNEL_64
-	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
-
-  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
-        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
-
-  Bit 2 (read):	XLF_EFI_HANDOVER_32
-	- If 1, the kernel supports the 32-bit EFI handoff entry point
-          given at handover_offset.
-
-  Bit 3 (read): XLF_EFI_HANDOVER_64
-	- If 1, the kernel supports the 64-bit EFI handoff entry point
-          given at handover_offset + 0x200.
-
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

diff --git a/trunk/Documentation/x86/zero-page.txt b/trunk/Documentation/x86/zero-page.txt
@@ -19,9 +19,6 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
-0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
-0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
-0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -30,7 +27,6 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
-1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1303,7 +1303,7 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:	Wolfram Sang <wsa@the-dreams.de>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/eeprom/at24.c
@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://mirror.egtvedt.no/avr32linux.org/
+W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/
@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3757,11 +3757,12 @@ S:	Maintained
 F:	drivers/i2c/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <wsa@the-dreams.de>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
@@ -4904,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5179,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -5777,6 +5778,15 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/muxes/i2c-mux-pca9541.c
 
+PCA9564/PCA9665 I2C BUS DRIVER
+M:	Wolfram Sang <w.sang@pengutronix.de>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/algos/i2c-algo-pca.c
+F:	drivers/i2c/busses/i2c-pca-*
+F:	include/linux/i2c-algo-pca.h
+F:	include/linux/i2c-pca-platform.h
+
 PCDP - PRIMARY CONSOLE AND DEBUG PORT
 M:	Khalid Aziz <khalid@gonehiking.org>
 S:	Maintained
@@ -6588,7 +6598,7 @@ F:	drivers/dma/dw_dmac_regs.h
 F:	drivers/dma/dw_dmac.c
 
 TIMEKEEPING, NTP
-M:	John Stultz <john.stultz@linaro.org>
+M:	John Stultz <johnstul@us.ibm.com>
 M:	Thomas Gleixner <tglx@linutronix.de>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
@@ -7078,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lgirdwood@gmail.com>
+M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION =
-NAME = Unicycling Gorilla
+EXTRAVERSION = -rc4
+NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"