ARM: OMAP: move OMAP USB platform data to <linux/platform_data/omap-u…

…sb.h>

In order to make single zImage work for ARM architecture,
we need to make sure we don't depend on private headers.

Move USB platform_data to <linux/platform_data/omap-usb.h>
and add a minimal drivers/mfd/usb-omap.h.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Partha Basak <parthab@india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated for local mfd/usb-omap.h]
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-4430sdp.c

@@ -27,6 +27,7 @@
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
+#include <linux/usb/musb.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>

arch/arm/mach-omap2/board-am3517evm.c

@@ -25,6 +25,7 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/musb.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include "am35xx.h"

arch/arm/mach-omap2/board-omap3evm.c

@@ -32,6 +32,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/smsc911x.h>
 

arch/arm/mach-omap2/board-omap4panda.c

@@ -29,6 +29,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
+#include <linux/usb/musb.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 

arch/arm/mach-omap2/board-rx51.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/usb/musb.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-omap2/board-ti8168evm.c

@@ -14,6 +14,8 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap2/usb-tusb6010.c

@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/export.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include <linux/usb/musb.h>
 

arch/arm/mach-omap2/usb.h

@@ -1,4 +1,4 @@
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 /* AM35x */
 /* USB 2.0 PHY Control */

drivers/mfd/omap-usb-host.c

@@ -26,9 +26,12 @@
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
 
+#include "omap-usb.h"
+
 #define USBHS_DRIVER_NAME	"usbhs_omap"
 #define OMAP_EHCI_DEVICE	"ehci-omap"
 #define OMAP_OHCI_DEVICE	"ohci-omap3"

drivers/mfd/omap-usb-tll.c

@@ -25,8 +25,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/err.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/usb-omap.h>
 
 #define USBTLL_DRIVER_NAME	"usbhs_tll"
 

drivers/mfd/omap-usb.h

@@ -0,0 +1,2 @@
+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);

drivers/usb/host/ehci-omap.c

@@ -39,12 +39,13 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
-#include <plat/usb.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 
+#include <linux/platform_data/usb-omap.h>
+
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
 #define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)

drivers/usb/host/ohci-omap3.c

@@ -30,7 +30,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
 
 /*-------------------------------------------------------------------------*/

drivers/usb/musb/am35x.c

@@ -34,8 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include "musb_core.h"
 

drivers/usb/musb/musb_dsps.c

@@ -38,13 +38,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 
-#include <plat/usb.h>
-
 #include "musb_core.h"
 
 #ifdef CONFIG_OF

drivers/usb/musb/omap2430.h

@@ -10,7 +10,7 @@
 #ifndef __MUSB_OMAP243X_H__
 #define __MUSB_OMAP243X_H__
 
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 /*
  * OMAP2430-specific definitions

arch/arm/plat-omap/include/plat/usb.h → include/linux/platform_data/usb-omap.h

@@ -1,11 +1,23 @@
-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
+/*
+ * usb-omap.h - Platform data for the various OMAP USB IPs
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
 
 #define OMAP3_HS_USB_PORTS	3
 
@@ -26,7 +38,9 @@ enum usbhs_omap_port_mode {
 	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
 };
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
+struct usbtll_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+};
 
 struct ehci_hcd_omap_platform_data {
 	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
@@ -47,9 +61,6 @@ struct usbhs_omap_platform_data {
 	struct ohci_hcd_omap_platform_data	*ohci_data;
 };
 
-struct usbtll_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
-};
 /*-------------------------------------------------------------------------*/
 
 struct omap_musb_board_data {
@@ -63,11 +74,7 @@ struct omap_musb_board_data {
 	void	(*reset)(void);
 };
 
-enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
-
-#endif
-
-#endif	/* __ASM_ARCH_OMAP_USB_H */
+enum musb_interface {
+	MUSB_INTERFACE_ULPI,
+	MUSB_INTERFACE_UTMI
+};