Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (67 commits)
  ide: remove redundant DMA blacklist check from __ide_dma_on()
  ide: cleanup ide_set_dma()
  ide: remove redundant ->ide_dma_on call from set_using_dma()
  sc1200: move DMA timings to timing tables
  ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag
  sis5513: factor out UDMA programming code
  pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()
  ide: make 'extra' field in struct ide_port_info u8
  ide: kill duplicate code in ide_dump_{ata,atapi}_status()
  ide-disk: use ide_get_lba_addr()
  ide: printk fix
  ide: add ide_tf_read() helper
  ide: fix registers loading order in ide_dump_ata_status()
  ide-disk: use do_rw_taskfile() (take 2)
  ide-disk: add ide_tf_set_cmd() helper
  ide-disk: extend timeout for PIO-in commands
  ide: remove 'handler' field from ide_task_t (take 2)
  ide: use ->data_phase to set ->handler in do_rw_taskfile()
  ide: convert do_rw_taskfile() to use ->data_phase
  ide: merge flagged_taskfile() into do_rw_taskfile()
  ...

drivers/ide/Kconfig

@@ -374,17 +374,6 @@ comment "PCI IDE chipsets support"
 config BLK_DEV_IDEPCI
 	bool
 
-config IDEPCI_SHARE_IRQ
-	bool "Sharing PCI IDE interrupts support"
-	depends on BLK_DEV_IDEPCI
-	help
-	  Some ATA/IDE chipsets have hardware support which allows for
-	  sharing a single IRQ with other cards. To enable support for
-	  this in the ATA/IDE driver, say Y here.
-
-	  It is safe to say Y to this question, in most cases.
-	  If unsure, say N.
-
 config IDEPCI_PCIBUS_ORDER
 	def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI
 
@@ -707,7 +696,6 @@ config BLK_DEV_SVWKS
 config BLK_DEV_SGIIOC4
 	tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
 	depends on (IA64_SGI_SN2 || IA64_GENERIC) && SGI_IOC4
-	select IDEPCI_SHARE_IRQ
 	select BLK_DEV_IDEDMA_PCI
 	help
 	  This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4

drivers/ide/arm/icside.c

@@ -272,8 +272,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
 	case XFER_SW_DMA_0:
 		cycle_time = 480;
 		break;
-	default:
-		return;
 	}
 
 	/*

drivers/ide/cris/ide-cris.c

@@ -747,8 +747,6 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
 			strobe = ATA_DMA2_STROBE;
 			hold = ATA_DMA2_HOLD;
 			break;
-		default:
-			return;
 	}
 
 	if (speed >= XFER_UDMA_0)

drivers/ide/ide-acpi.c

@@ -383,27 +383,19 @@ static int taskfile_load_raw(ide_drive_t *drive,
 	       gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
 
 	memset(&args, 0, sizeof(ide_task_t));
-	args.command_type = IDE_DRIVE_TASK_NO_DATA;
-	args.data_phase   = TASKFILE_NO_DATA;
-	args.handler      = &task_no_data_intr;
 
 	/* convert gtf to IDE Taskfile */
-	args.tfRegister[1] = gtf->tfa[0];	/* 0x1f1 */
-	args.tfRegister[2] = gtf->tfa[1];	/* 0x1f2 */
-	args.tfRegister[3] = gtf->tfa[2];	/* 0x1f3 */
-	args.tfRegister[4] = gtf->tfa[3];	/* 0x1f4 */
-	args.tfRegister[5] = gtf->tfa[4];	/* 0x1f5 */
-	args.tfRegister[6] = gtf->tfa[5];	/* 0x1f6 */
-	args.tfRegister[7] = gtf->tfa[6];	/* 0x1f7 */
+	memcpy(&args.tf_array[7], &gtf->tfa, 7);
+	args.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE;
 
 	if (ide_noacpitfs) {
 		DEBPRINT("_GTF execution disabled\n");
 		return err;
 	}
 
-	err = ide_raw_taskfile(drive, &args, NULL);
+	err = ide_no_data_taskfile(drive, &args);
 	if (err)
-		printk(KERN_ERR "%s: ide_raw_taskfile failed: %u\n",
+		printk(KERN_ERR "%s: ide_no_data_taskfile failed: %u\n",
 		       __FUNCTION__, err);
 
 	return err;

drivers/ide/ide-cd.c

@@ -917,19 +917,13 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
 	if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY))
 		return startstop;
 
+	/* FIXME: for Virtual DMA we must check harder */
 	if (info->dma)
 		info->dma = !hwif->dma_setup(drive);
 
 	/* Set up the controller registers. */
-	/* FIXME: for Virtual DMA we must check harder */
-	HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG);
-	HWIF(drive)->OUTB(0, IDE_IREASON_REG);
-	HWIF(drive)->OUTB(0, IDE_SECTOR_REG);
-
-	HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG);
-	HWIF(drive)->OUTB(xferlen >> 8  , IDE_BCOUNTH_REG);
-	if (IDE_CONTROL_REG)
-		HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
+	ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL |
+			   IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma);
 
 	if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
 		/* waiting for CDB interrupt, not DMA yet. */