Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "A lot of movement in the EDAC tree this time around, coarse summary
  below:

   - Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
     buffers (Thor Thayer)

   - split the memory controller part out of mpc85xx and share it with a
     new Freescale ARM Layerscape driver (York Sun)

   - amd64_edac fixes (Yazen Ghannam)

   - misc cleanups, refactoring and fixes all over the place"

* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
  EDAC, altera: Add IRQ Flags to disable IRQ while handling
  EDAC, altera: Correct EDAC IRQ error message
  EDAC, amd64: Autoload module using x86_cpu_id
  EDAC, sb_edac: Remove NULL pointer check on array pci_tad
  EDAC: Remove NO_IRQ from powerpc-only drivers
  EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
  EDAC, fsl_ddr: Add entry to MAINTAINERS
  EDAC: Move Doug Thompson to CREDITS
  EDAC, I3000: Orphan driver
  EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
  EDAC, layerscape: Add Layerscape EDAC support
  EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
  EDAC, fsl_ddr: Add support for little endian
  EDAC, fsl_ddr: Add missing DDR DRAM types
  EDAC, fsl_ddr: Rename macros and names
  EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
  EDAC, mpc85xx: Replace printk() with pr_* format
  EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
  EDAC, altera: Rename MC trigger to common name
  EDAC, altera: Rename device trigger to common name
  ...

CREDITS

@@ -3523,6 +3523,10 @@ S: 145 Howard St.
 S: Northborough, MA 01532
 S: USA
 
+N: Doug Thompson
+E: dougthompson@xmission.com
+D: EDAC
+
 N: Tommy Thorn
 E: Tommy.Thorn@irisa.fr
 W: http://www.irisa.fr/prive/thorn/index.html
@@ -3659,6 +3663,10 @@ S: Obere Heerbergstrasse 17
 S: 97078 Wuerzburg
 S: Germany
 
+N: Jason Uhlenkott
+E: juhlenko@akamai.com
+D: I3000 EDAC driver
+
 N: Greg Ungerer
 E: gerg@snapgear.com
 D: uClinux kernel hacker

Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt

@@ -90,6 +90,47 @@ Required Properties:
 - interrupts      : Should be single bit error interrupt, then double bit error
 	interrupt, in this order.
 
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+QSPI FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-qspi-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order for port A, and then single bit error interrupt,
+	then double bit error interrupt in this order for port B.
+
 Example:
 
 	eccmgr: eccmgr@ffd06000 {
@@ -132,4 +173,61 @@ Example:
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
 				     <37 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		nand-buf-ecc@ff8c2000 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2000 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
+				     <43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c2400 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2400 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
+				     <45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c2800 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2800 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+				     <44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c8000 {
+			compatible = "altr,socfpga-dma-ecc";
+			reg = <0xff8c8000 0x400>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+				     <42 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c8800 {
+			compatible = "altr,socfpga-usb-ecc";
+			reg = <0xff8c8800 0x400>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+				     <34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi-ecc@ff8c8400 {
+			compatible = "altr,socfpga-qspi-ecc";
+			reg = <0xff8c8400 0x400>;
+			altr,ecc-parent = <&qspi>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c2c00 {
+			compatible = "altr,socfpga-sdmmc-ecc";
+			reg = <0xff8c2c00 0x400>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+				     <47 IRQ_TYPE_LEVEL_HIGH>,
+				     <16 IRQ_TYPE_LEVEL_HIGH>,
+				     <48 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};

Documentation/devicetree/bindings/powerpc/fsl/mem-ctrlr.txt → Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt

@@ -7,6 +7,8 @@ Properties:
 		  "fsl,qoriq-memory-controller".
 - reg		: Address and size of DDR controller registers
 - interrupts	: Error interrupt of DDR controller
+- little-endian	: Specifies little-endian access to registers
+		  If omitted, big-endian will be used.
 
 Example 1:
 

MAINTAINERS

@@ -4410,7 +4410,6 @@ F:	Documentation/filesystems/ecryptfs.txt
 F:	fs/ecryptfs/
 
 EDAC-CORE
-M:	Doug Thompson <dougthompson@xmission.com>
 M:	Borislav Petkov <bp@alien8.de>
 M:	Mauro Carvalho Chehab <mchehab@s-opensource.com>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -4423,14 +4422,12 @@ F:	drivers/edac/
 F:	include/linux/edac.h
 
 EDAC-AMD64
-M:	Doug Thompson <dougthompson@xmission.com>
 M:	Borislav Petkov <bp@alien8.de>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
 EDAC-CALXEDA
-M:	Doug Thompson <dougthompson@xmission.com>
 M:	Robert Richter <rric@kernel.org>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
@@ -4446,17 +4443,21 @@ F:	drivers/edac/octeon_edac*
 
 EDAC-E752X
 M:	Mark Gross <mark.gross@intel.com>
-M:	Doug Thompson <dougthompson@xmission.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
-M:	Doug Thompson <dougthompson@xmission.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
+EDAC-FSL_DDR
+M:	York Sun <york.sun@nxp.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/fsl_ddr_edac.*
+
 EDAC-GHES
 M:	Mauro Carvalho Chehab <mchehab@s-opensource.com>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -4471,13 +4472,11 @@ S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
-M:	Jason Uhlenkott <juhlenko@akamai.com>
 L:	linux-edac@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
-M:	Doug Thompson <dougthompson@xmission.com>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/i5000_edac.c

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -639,6 +639,22 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
 					     <37 IRQ_TYPE_LEVEL_HIGH>;
 			};
+
+			dma-ecc@ff8c8000 {
+				compatible = "altr,socfpga-dma-ecc";
+				reg = <0xff8c8000 0x400>;
+				altr,ecc-parent = <&pdma>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+					     <42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			usb0-ecc@ff8c8800 {
+				compatible = "altr,socfpga-usb-ecc";
+				reg = <0xff8c8800 0x400>;
+				altr,ecc-parent = <&usb0>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <34 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {

arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts

@@ -25,3 +25,15 @@
 	broken-cd;
 	bus-width = <4>;
 };
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};

arch/arm64/Kconfig.platforms

@@ -55,6 +55,7 @@ config ARCH_EXYNOS
 
 config ARCH_LAYERSCAPE
 	bool "ARMv8 based Freescale Layerscape SoC family"
+	select EDAC_SUPPORT
 	help
 	  This enables support for the Freescale Layerscape SoC family.
 

drivers/edac/Kconfig

@@ -266,6 +266,13 @@ config EDAC_MPC85XX
 	  Support for error detection and correction on the Freescale
 	  MPC8349, MPC8560, MPC8540, MPC8548, T4240
 
+config EDAC_LAYERSCAPE
+	tristate "Freescale Layerscape DDR"
+	depends on EDAC_MM_EDAC && ARCH_LAYERSCAPE
+	help
+	  Support for error detection and correction on Freescale memory
+	  controllers on Layerscape SoCs.
+
 config EDAC_MV64X60
 	tristate "Marvell MV64x60"
 	depends on EDAC_MM_EDAC && MV64X60
@@ -406,6 +413,41 @@ config EDAC_ALTERA_ETHERNET
 	  Support for error detection and correction on the
 	  Altera Ethernet FIFO Memory for Altera SoCs.
 
+config EDAC_ALTERA_NAND
+	bool "Altera NAND FIFO ECC"
+	depends on EDAC_ALTERA=y && MTD_NAND_DENALI
+	help
+	  Support for error detection and correction on the
+	  Altera NAND FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_DMA
+	bool "Altera DMA FIFO ECC"
+	depends on EDAC_ALTERA=y && PL330_DMA=y
+	help
+	  Support for error detection and correction on the
+	  Altera DMA FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_USB
+	bool "Altera USB FIFO ECC"
+	depends on EDAC_ALTERA=y && USB_DWC2
+	help
+	  Support for error detection and correction on the
+	  Altera USB FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_QSPI
+	bool "Altera QSPI FIFO ECC"
+	depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI
+	help
+	  Support for error detection and correction on the
+	  Altera QSPI FIFO Memory for Altera SoCs.
+
+config EDAC_ALTERA_SDMMC
+	bool "Altera SDMMC FIFO ECC"
+	depends on EDAC_ALTERA=y && MMC_DW
+	help
+	  Support for error detection and correction on the
+	  Altera SDMMC FIFO Memory for Altera SoCs.
+
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
 	depends on EDAC_MM_EDAC && ARCH_ZYNQ

drivers/edac/Makefile

@@ -51,7 +51,13 @@ amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
 obj-$(CONFIG_EDAC_AMD64)		+= amd64_edac_mod.o
 
 obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
-obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac.o
+
+mpc85xx_edac_mod-y			:= fsl_ddr_edac.o mpc85xx_edac.o
+obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac_mod.o
+
+layerscape_edac_mod-y			:= fsl_ddr_edac.o layerscape_edac.o
+obj-$(CONFIG_EDAC_LAYERSCAPE)		+= layerscape_edac_mod.o
+
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
 obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o