Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Documentation/accounting/psi.txt

@@ -56,12 +56,12 @@ situation from a state where some tasks are stalled but the CPU is
 still doing productive work. As such, time spent in this subset of the
 stall state is tracked separately and exported in the "full" averages.
 
-The ratios are tracked as recent trends over ten, sixty, and three
-hundred second windows, which gives insight into short term events as
-well as medium and long term trends. The total absolute stall time is
-tracked and exported as well, to allow detection of latency spikes
-which wouldn't necessarily make a dent in the time averages, or to
-average trends over custom time frames.
+The ratios (in %) are tracked as recent trends over ten, sixty, and
+three hundred second windows, which gives insight into short term events
+as well as medium and long term trends. The total absolute stall time
+(in us) is tracked and exported as well, to allow detection of latency
+spikes which wouldn't necessarily make a dent in the time averages,
+or to average trends over custom time frames.
 
 Cgroup2 interface
 =================

Documentation/devicetree/bindings/arm/cpus.yaml

@@ -228,7 +228,7 @@ patternProperties:
                 - renesas,r9a06g032-smp
                 - rockchip,rk3036-smp
                 - rockchip,rk3066-smp
-		- socionext,milbeaut-m10v-smp
+                - socionext,milbeaut-m10v-smp
                 - ste,dbx500-smp
 
       cpu-release-addr:

Documentation/lzo.txt

@@ -102,9 +102,11 @@ Byte sequences
                 dictionary which is empty, and that it will always be
                 invalid at this place.
 
-      17      : bitstream version. If the first byte is 17, the next byte
-                gives the bitstream version (version 1 only). If the first byte
-                is not 17, the bitstream version is 0.
+      17      : bitstream version. If the first byte is 17, and compressed
+                stream length is at least 5 bytes (length of shortest possible
+                versioned bitstream), the next byte gives the bitstream version
+                (version 1 only).
+                Otherwise, the bitstream version is 0.
 
       18..21  : copy 0..3 literals
                 state = (byte - 17) = 0..3  [ copy <state> literals ]

MAINTAINERS

@@ -1893,14 +1893,15 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git
 ARM/NUVOTON NPCM ARCHITECTURE
 M:	Avi Fishman <avifishman70@gmail.com>
 M:	Tomer Maimon <tmaimon77@gmail.com>
+M:	Tali Perry <tali.perry1@gmail.com>
 R:	Patrick Venture <venture@google.com>
 R:	Nancy Yuen <yuenn@google.com>
-R:	Brendan Higgins <brendanhiggins@google.com>
+R:	Benjamin Fair <benjaminfair@google.com>
 L:	openbmc@lists.ozlabs.org (moderated for non-subscribers)
 S:	Supported
 F:	arch/arm/mach-npcm/
 F:	arch/arm/boot/dts/nuvoton-npcm*
-F:	include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
+F:	include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
 F:	drivers/*/*npcm*
 F:	Documentation/devicetree/bindings/*/*npcm*
 F:	Documentation/devicetree/bindings/*/*/*npcm*
@@ -7518,7 +7519,7 @@ F:	include/net/mac802154.h
 F:	include/net/af_ieee802154.h
 F:	include/net/cfg802154.h
 F:	include/net/ieee802154_netdev.h
-F:	Documentation/networking/ieee802154.txt
+F:	Documentation/networking/ieee802154.rst
 
 IFE PROTOCOL
 M:	Yotam Gigi <yotam.gi@gmail.com>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Shy Crocodile
 
 # *DOCUMENTATION*

arch/arc/include/asm/syscall.h

@@ -55,12 +55,11 @@ syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
  */
 static inline void
 syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
-		      unsigned int i, unsigned int n, unsigned long *args)
+		      unsigned long *args)
 {
 	unsigned long *inside_ptregs = &(regs->r0);
-	inside_ptregs -= i;
-
-	BUG_ON((i + n) > 6);
+	unsigned int n = 6;
+	unsigned int i = 0;
 
 	while (n--) {
 		args[i++] = (*inside_ptregs);

arch/arm/boot/dts/am335x-evm.dts

@@ -57,6 +57,24 @@
 		enable-active-high;
 	};
 
+	/* TPS79501 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS79501 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
@@ -499,10 +517,10 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 

arch/arm/boot/dts/am335x-evmsk.dts

@@ -73,6 +73,24 @@
 		enable-active-high;
 	};
 
+	/* TPS79518 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS78633 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
@@ -501,10 +519,10 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -1762,7 +1762,7 @@
 			reg = <0xcc000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_D_CAN0_CLKCTRL 0>;
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -1785,7 +1785,7 @@
 			reg = <0xd0000 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM3_D_CAN1_CLKCTRL 0>;
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;

arch/arm/boot/dts/rk3288-tinker.dtsi

@@ -254,6 +254,7 @@
 			};
 
 			vccio_sd: LDO_REG5 {
+				regulator-boot-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-name = "vccio_sd";
@@ -430,7 +431,7 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	card-detect-delay = <200>;
+	broken-cd;
 	disable-wp;			/* wp not hooked up */
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;

arch/arm/boot/dts/rk3288-veyron.dtsi

@@ -25,8 +25,6 @@
 
 	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwr_key_l>;

arch/arm/boot/dts/rk3288.dtsi

@@ -70,7 +70,7 @@
 			compatible = "arm,cortex-a12";
 			reg = <0x501>;
 			resets = <&cru SRST_CORE1>;
-			operating-points = <&cpu_opp_table>;
+			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -80,7 +80,7 @@
 			compatible = "arm,cortex-a12";
 			reg = <0x502>;
 			resets = <&cru SRST_CORE2>;
-			operating-points = <&cpu_opp_table>;
+			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -90,7 +90,7 @@
 			compatible = "arm,cortex-a12";
 			reg = <0x503>;
 			resets = <&cru SRST_CORE3>;
-			operating-points = <&cpu_opp_table>;
+			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
@@ -1119,8 +1119,6 @@
 		clock-names = "ref", "pclk";
 		power-domains = <&power RK3288_PD_VIO>;
 		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		status = "disabled";
 
 		ports {
@@ -1282,27 +1280,27 @@
 	gpu_opp_table: gpu-opp-table {
 		compatible = "operating-points-v2";
 
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <950000>;
 		};
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <1100000>;
 		};
-		opp@500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1200000>;
 		};
-		opp@600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1250000>;
 		};

arch/arm/boot/dts/sama5d2-pinfunc.h

@@ -518,7 +518,7 @@
 #define PIN_PC9__GPIO			PINMUX_PIN(PIN_PC9, 0, 0)
 #define PIN_PC9__FIQ			PINMUX_PIN(PIN_PC9, 1, 3)
 #define PIN_PC9__GTSUCOMP		PINMUX_PIN(PIN_PC9, 2, 1)
-#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 2, 1)
+#define PIN_PC9__ISC_D0			PINMUX_PIN(PIN_PC9, 3, 1)
 #define PIN_PC9__TIOA4			PINMUX_PIN(PIN_PC9, 4, 2)
 #define PIN_PC10			74
 #define PIN_PC10__GPIO			PINMUX_PIN(PIN_PC10, 0, 0)

arch/arm/boot/dts/ste-nomadik-nhk15.dts

@@ -213,13 +213,12 @@
 		gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>;
 		gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		/*
-		 * This chipselect is active high. Just setting the flags
-		 * to GPIO_ACTIVE_HIGH is not enough for the SPI DT bindings,
-		 * it will be ignored, only the special "spi-cs-high" flag
-		 * really counts.
+		 * It's not actually active high, but the frameworks assume
+		 * the polarity of the passed-in GPIO is "normal" (active
+		 * high) then actively drives the line low to select the
+		 * chip.
 		 */
 		cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-		spi-cs-high;
 		num-chipselects = <1>;
 
 		/*

arch/arm/include/asm/syscall.h

@@ -55,53 +55,22 @@ static inline void syscall_set_return_value(struct task_struct *task,
 
 static inline void syscall_get_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
 					 unsigned long *args)
 {
-	if (n == 0)
-		return;
-
-	if (i + n > SYSCALL_MAX_ARGS) {
-		unsigned long *args_bad = args + SYSCALL_MAX_ARGS - i;
-		unsigned int n_bad = n + i - SYSCALL_MAX_ARGS;
-		pr_warn("%s called with max args %d, handling only %d\n",
-			__func__, i + n, SYSCALL_MAX_ARGS);
-		memset(args_bad, 0, n_bad * sizeof(args[0]));
-		n = SYSCALL_MAX_ARGS - i;
-	}
-
-	if (i == 0) {
-		args[0] = regs->ARM_ORIG_r0;
-		args++;
-		i++;
-		n--;
-	}
-
-	memcpy(args, &regs->ARM_r0 + i, n * sizeof(args[0]));
+	args[0] = regs->ARM_ORIG_r0;
+	args++;
+
+	memcpy(args, &regs->ARM_r0 + 1, 5 * sizeof(args[0]));
 }
 
 static inline void syscall_set_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
-					 unsigned int i, unsigned int n,
 					 const unsigned long *args)
 {
-	if (n == 0)
-		return;
-
-	if (i + n > SYSCALL_MAX_ARGS) {
-		pr_warn("%s called with max args %d, handling only %d\n",
-			__func__, i + n, SYSCALL_MAX_ARGS);
-		n = SYSCALL_MAX_ARGS - i;
-	}
-
-	if (i == 0) {
-		regs->ARM_ORIG_r0 = args[0];
-		args++;
-		i++;
-		n--;
-	}
-
-	memcpy(&regs->ARM_r0 + i, args, n * sizeof(args[0]));
+	regs->ARM_ORIG_r0 = args[0];
+	args++;
+
+	memcpy(&regs->ARM_r0 + 1, args, 5 * sizeof(args[0]));
 }
 
 static inline int syscall_get_arch(void)