Merge branches 'iommu/fixes', 'arm/mediatek', 'arm/smmu', 'arm/exynos…

…', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next

Documentation/admin-guide/kernel-parameters.txt

@@ -1869,13 +1869,6 @@
 			bypassed by not enabling DMAR with this option. In
 			this case, gfx device will use physical address for
 			DMA.
-		forcedac [X86-64]
-			With this option iommu will not optimize to look
-			for io virtual address below 32-bit forcing dual
-			address cycle on pci bus for cards supporting greater
-			than 32-bit addressing. The default is to look
-			for translation below 32-bit and if not available
-			then look in the higher range.
 		strict [Default Off]
 			With this option on every unmap_single operation will
 			result in a hardware IOTLB flush operation as opposed
@@ -1964,6 +1957,14 @@
 		nobypass	[PPC/POWERNV]
 			Disable IOMMU bypass, using IOMMU for PCI devices.
 
+	iommu.forcedac=	[ARM64, X86] Control IOVA allocation for PCI devices.
+			Format: { "0" | "1" }
+			0 - Try to allocate a 32-bit DMA address first, before
+			  falling back to the full range if needed.
+			1 - Allocate directly from the full usable range,
+			  forcing Dual Address Cycle for PCI cards supporting
+			  greater than 32-bit addressing.
+
 	iommu.strict=	[ARM64] Configure TLB invalidation behaviour
 			Format: { "0" | "1" }
 			0 - Lazy mode.

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

@@ -34,6 +34,7 @@ properties:
         items:
           - enum:
               - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
               - qcom,sc8180x-smmu-500
               - qcom,sdm845-smmu-500
               - qcom,sm8150-smmu-500

Documentation/devicetree/bindings/iommu/sprd,iommu.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc IOMMU and Multi-media MMU
+
+maintainers:
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,iommu-v1
+
+  "#iommu-cells":
+    const: 0
+    description:
+      Unisoc IOMMUs are all single-master IOMMU devices, therefore no
+      additional information needs to associate with its master device.
+      Please refer to the generic bindings document for more details,
+      Documentation/devicetree/bindings/iommu/iommu.txt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Reference to a gate clock phandle, since access to some of IOMMUs are
+      controlled by gate clock, but this is not required.
+
+required:
+  - compatible
+  - reg
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu_disp: iommu@63000800 {
+      compatible = "sprd,iommu-v1";
+      reg = <0x63000800 0x80>;
+      #iommu-cells = <0>;
+    };
+
+  - |
+    iommu_jpg: iommu@62300300 {
+      compatible = "sprd,iommu-v1";
+      reg = <0x62300300 0x80>;
+      #iommu-cells = <0>;
+      clocks = <&mm_gate 1>;
+    };
+
+...

arch/powerpc/include/asm/fsl_pamu_stash.h

@@ -7,21 +7,15 @@
 #ifndef __FSL_PAMU_STASH_H
 #define __FSL_PAMU_STASH_H
 
+struct iommu_domain;
+
 /* cache stash targets */
 enum pamu_stash_target {
 	PAMU_ATTR_CACHE_L1 = 1,
 	PAMU_ATTR_CACHE_L2,
 	PAMU_ATTR_CACHE_L3,
 };
 
-/*
- * This attribute allows configuring stashig specific parameters
- * in the PAMU hardware.
- */
-
-struct pamu_stash_attribute {
-	u32	cpu;	/* cpu number */
-	u32	cache;	/* cache to stash to: L1,L2,L3 */
-};
+int fsl_pamu_configure_l1_stash(struct iommu_domain *domain, u32 cpu);
 
 #endif  /* __FSL_PAMU_STASH_H */

arch/x86/events/amd/iommu.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/cpumask.h>
 #include <linux/slab.h>
+#include <linux/amd-iommu.h>
 
 #include "../perf_event.h"
 #include "iommu.h"

arch/x86/events/amd/iommu.h

@@ -21,23 +21,4 @@
 #define PC_MAX_SPEC_BNKS			64
 #define PC_MAX_SPEC_CNTRS			16
 
-struct amd_iommu;
-
-/* amd_iommu_init.c external support functions */
-extern int amd_iommu_get_num_iommus(void);
-
-extern bool amd_iommu_pc_supported(void);
-
-extern u8 amd_iommu_pc_get_max_banks(unsigned int idx);
-
-extern u8 amd_iommu_pc_get_max_counters(unsigned int idx);
-
-extern int amd_iommu_pc_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
-				u8 fxn, u64 *value);
-
-extern int amd_iommu_pc_get_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
-				u8 fxn, u64 *value);
-
-extern struct amd_iommu *get_amd_iommu(int idx);
-
 #endif /*_PERF_EVENT_AMD_IOMMU_H_*/

drivers/acpi/arm64/iort.c

@@ -968,15 +968,16 @@ static int iort_pci_iommu_init(struct pci_dev *pdev, u16 alias, void *data)
 static void iort_named_component_init(struct device *dev,
 				      struct acpi_iort_node *node)
 {
+	struct property_entry props[2] = {};
 	struct acpi_iort_named_component *nc;
-	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
-
-	if (!fwspec)
-		return;
 
 	nc = (struct acpi_iort_named_component *)node->node_data;
-	fwspec->num_pasid_bits = FIELD_GET(ACPI_IORT_NC_PASID_BITS,
-					   nc->node_flags);
+	props[0] = PROPERTY_ENTRY_U32("pasid-num-bits",
+				      FIELD_GET(ACPI_IORT_NC_PASID_BITS,
+						nc->node_flags));
+
+	if (device_add_properties(dev, props))
+		dev_warn(dev, "Could not add device properties\n");
 }
 
 static int iort_nc_iommu_map(struct device *dev, struct acpi_iort_node *node)

drivers/gpu/drm/amd/amdkfd/kfd_iommu.c

@@ -329,10 +329,6 @@ int kfd_iommu_resume(struct kfd_dev *kfd)
 	return 0;
 }
 
-extern bool amd_iommu_pc_supported(void);
-extern u8 amd_iommu_pc_get_max_banks(u16 devid);
-extern u8 amd_iommu_pc_get_max_counters(u16 devid);
-
 /** kfd_iommu_add_perf_counters - Add IOMMU performance counters to topology
  */
 int kfd_iommu_add_perf_counters(struct kfd_topology_device *kdev)

drivers/gpu/drm/msm/adreno/adreno_gpu.c

@@ -188,10 +188,7 @@ int adreno_zap_shader_load(struct msm_gpu *gpu, u32 pasid)
 
 void adreno_set_llc_attributes(struct iommu_domain *iommu)
 {
-	struct io_pgtable_domain_attr pgtbl_cfg;
-
-	pgtbl_cfg.quirks = IO_PGTABLE_QUIRK_ARM_OUTER_WBWA;
-	iommu_domain_set_attr(iommu, DOMAIN_ATTR_IO_PGTABLE_CFG, &pgtbl_cfg);
+	iommu_set_pgtable_quirks(iommu, IO_PGTABLE_QUIRK_ARM_OUTER_WBWA);
 }
 
 struct msm_gem_address_space *

drivers/iommu/Kconfig

@@ -349,7 +349,7 @@ config S390_AP_IOMMU
 	  is not implemented as it is not necessary for VFIO.
 
 config MTK_IOMMU
-	bool "MTK IOMMU Support"
+	tristate "MediaTek IOMMU Support"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select ARM_DMA_USE_IOMMU
 	select IOMMU_API
@@ -364,7 +364,7 @@ config MTK_IOMMU
 	  If unsure, say N here.
 
 config MTK_IOMMU_V1
-	bool "MTK IOMMU Version 1 (M4U gen1) Support"
+	tristate "MediaTek IOMMU Version 1 (M4U gen1) Support"
 	depends on ARM
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select ARM_DMA_USE_IOMMU
@@ -408,4 +408,16 @@ config VIRTIO_IOMMU
 
 	  Say Y here if you intend to run this kernel as a guest.
 
+config SPRD_IOMMU
+	tristate "Unisoc IOMMU Support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	select IOMMU_API
+	help
+	  Support for IOMMU on Unisoc's SoCs, this IOMMU can be used by
+	  Unisoc's multimedia devices, such as display, Image codec(jpeg)
+	  and a few signal processors, including VSP(video), GSP(graphic),
+	  ISP(image), and CPP(camera pixel processor), etc.
+
+	  Say Y here if you want to use the multimedia devices listed above.
+
 endif # IOMMU_SUPPORT

drivers/iommu/Makefile

@@ -27,4 +27,5 @@ obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o
 obj-$(CONFIG_S390_IOMMU) += s390-iommu.o
 obj-$(CONFIG_HYPERV_IOMMU) += hyperv-iommu.o
 obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu.o
-obj-$(CONFIG_IOMMU_SVA_LIB) += iommu-sva-lib.o
+obj-$(CONFIG_IOMMU_SVA_LIB) += iommu-sva-lib.o io-pgfault.o
+obj-$(CONFIG_SPRD_IOMMU) += sprd-iommu.o

drivers/iommu/amd/amd_iommu.h

@@ -11,7 +11,6 @@
 
 #include "amd_iommu_types.h"
 
-extern int amd_iommu_get_num_iommus(void);
 extern int amd_iommu_init_dma_ops(void);
 extern int amd_iommu_init_passthrough(void);
 extern irqreturn_t amd_iommu_int_thread(int irq, void *data);
@@ -65,7 +64,6 @@ extern int amd_iommu_flush_tlb(struct iommu_domain *dom, u32 pasid);
 extern int amd_iommu_domain_set_gcr3(struct iommu_domain *dom, u32 pasid,
 				     unsigned long cr3);
 extern int amd_iommu_domain_clear_gcr3(struct iommu_domain *dom, u32 pasid);
-extern struct iommu_domain *amd_iommu_get_v2_domain(struct pci_dev *pdev);
 
 #ifdef CONFIG_IRQ_REMAP
 extern int amd_iommu_create_irq_domain(struct amd_iommu *iommu);

drivers/iommu/amd/amd_iommu_types.h

@@ -693,7 +693,6 @@ struct iommu_dev_data {
 	} ats;				  /* ATS state */
 	bool pri_tlp;			  /* PASID TLB required for
 					     PPR completions */
-	u32 errata;			  /* Bitmap for errata to apply */
 	bool use_vapic;			  /* Enable device to use vapic mode */
 	bool defer_attach;
 

drivers/iommu/amd/init.c

@@ -12,7 +12,6 @@
 #include <linux/acpi.h>
 #include <linux/list.h>
 #include <linux/bitmap.h>
-#include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/syscore_ops.h>
 #include <linux/interrupt.h>
@@ -208,7 +207,6 @@ u16 *amd_iommu_alias_table;
  * for a specific device. It is also indexed by the PCI device id.
  */
 struct amd_iommu **amd_iommu_rlookup_table;
-EXPORT_SYMBOL(amd_iommu_rlookup_table);
 
 /*
  * This table is used to find the irq remapping table for a given device id
@@ -257,8 +255,6 @@ static enum iommu_init_state init_state = IOMMU_START_STATE;
 static int amd_iommu_enable_interrupts(void);
 static int __init iommu_go_to_state(enum iommu_init_state state);
 static void init_device_table_dma(void);
-static int iommu_pc_get_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr,
-				u8 fxn, u64 *value, bool is_write);
 
 static bool amd_iommu_pre_enabled = true;
 
@@ -268,7 +264,6 @@ bool translation_pre_enabled(struct amd_iommu *iommu)
 {
 	return (iommu->flags & AMD_IOMMU_FLAG_TRANS_PRE_ENABLED);
 }
-EXPORT_SYMBOL(translation_pre_enabled);
 
 static void clear_translation_pre_enabled(struct amd_iommu *iommu)
 {
@@ -1717,65 +1712,23 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	return 0;
 }
 
-static void __init init_iommu_perf_ctr(struct amd_iommu *iommu)
+static void init_iommu_perf_ctr(struct amd_iommu *iommu)
 {
-	int retry;
+	u64 val;
 	struct pci_dev *pdev = iommu->dev;
-	u64 val = 0xabcd, val2 = 0, save_reg, save_src;
 
 	if (!iommu_feature(iommu, FEATURE_PC))
 		return;
 
 	amd_iommu_pc_present = true;
 
-	/* save the value to restore, if writable */
-	if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, false) ||
-	    iommu_pc_get_set_reg(iommu, 0, 0, 8, &save_src, false))
-		goto pc_false;
-
-	/*
-	 * Disable power gating by programing the performance counter
-	 * source to 20 (i.e. counts the reads and writes from/to IOMMU
-	 * Reserved Register [MMIO Offset 1FF8h] that are ignored.),
-	 * which never get incremented during this init phase.
-	 * (Note: The event is also deprecated.)
-	 */
-	val = 20;
-	if (iommu_pc_get_set_reg(iommu, 0, 0, 8, &val, true))
-		goto pc_false;
-
-	/* Check if the performance counters can be written to */
-	val = 0xabcd;
-	for (retry = 5; retry; retry--) {
-		if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &val, true) ||
-		    iommu_pc_get_set_reg(iommu, 0, 0, 0, &val2, false) ||
-		    val2)
-			break;
-
-		/* Wait about 20 msec for power gating to disable and retry. */
-		msleep(20);
-	}
-
-	/* restore */
-	if (iommu_pc_get_set_reg(iommu, 0, 0, 0, &save_reg, true) ||
-	    iommu_pc_get_set_reg(iommu, 0, 0, 8, &save_src, true))
-		goto pc_false;
-
-	if (val != val2)
-		goto pc_false;
-
 	pci_info(pdev, "IOMMU performance counters supported\n");
 
 	val = readl(iommu->mmio_base + MMIO_CNTR_CONF_OFFSET);
 	iommu->max_banks = (u8) ((val >> 12) & 0x3f);
 	iommu->max_counters = (u8) ((val >> 7) & 0xf);
 
 	return;
-
-pc_false:
-	pci_err(pdev, "Unable to read/write to IOMMU perf counter.\n");
-	amd_iommu_pc_present = false;
-	return;
 }
 
 static ssize_t amd_iommu_show_cap(struct device *dev,
@@ -1837,7 +1790,7 @@ static void __init late_iommu_features_init(struct amd_iommu *iommu)
 	 * IVHD and MMIO conflict.
 	 */
 	if (features != iommu->features)
-		pr_warn(FW_WARN "EFR mismatch. Use IVHD EFR (%#llx : %#llx\n).",
+		pr_warn(FW_WARN "EFR mismatch. Use IVHD EFR (%#llx : %#llx).\n",
 			features, iommu->features);
 }
 
@@ -3277,7 +3230,6 @@ struct amd_iommu *get_amd_iommu(unsigned int idx)
 			return iommu;
 	return NULL;
 }
-EXPORT_SYMBOL(get_amd_iommu);
 
 /****************************************************************************
  *
@@ -3359,7 +3311,6 @@ int amd_iommu_pc_get_reg(struct amd_iommu *iommu, u8 bank, u8 cntr, u8 fxn, u64
 
 	return iommu_pc_get_set_reg(iommu, bank, cntr, fxn, value, false);
 }
-EXPORT_SYMBOL(amd_iommu_pc_get_reg);
 
 int amd_iommu_pc_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr, u8 fxn, u64 *value)
 {
@@ -3368,4 +3319,3 @@ int amd_iommu_pc_set_reg(struct amd_iommu *iommu, u8 bank, u8 cntr, u8 fxn, u64
 
 	return iommu_pc_get_set_reg(iommu, bank, cntr, fxn, value, true);
 }
-EXPORT_SYMBOL(amd_iommu_pc_set_reg);