Merge branch 'timers/core' into smp/hotplug to pick up dependencies

Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt

@@ -0,0 +1,17 @@
+Oxford Semiconductor OXNAS SoCs Family RPS Timer
+================================================
+
+Required properties:
+- compatible: Should be "oxsemi,ox810se-rps-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupts of the two timers
+- clocks : The phandle of the timer clock source
+
+example:
+
+timer0: timer@200 {
+	compatible = "oxsemi,ox810se-rps-timer";
+	reg = <0x200 0x40>;
+	clocks = <&rpsclk>;
+	interrupts = <4 5>;
+};

Documentation/devicetree/bindings/timer/rockchip,rk3288-timer.txt → Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt

@@ -1,7 +1,9 @@
-Rockchip rk3288 timer
+Rockchip rk timer
 
 Required properties:
-- compatible: shall be "rockchip,rk3288-timer"
+- compatible: shall be one of:
+  "rockchip,rk3288-timer" - for rk3066, rk3036, rk3188, rk322x, rk3288, rk3368
+  "rockchip,rk3399-timer" - for rk3399
 - reg: base address of the timer register starting with TIMERS CONTROL register
 - interrupts: should contain the interrupts for Timer0
 - clocks : must contain an entry for each entry in clock-names

Documentation/kernel-parameters.txt

@@ -687,6 +687,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			[SPARC64] tick
 			[X86-64] hpet,tsc
 
+	clocksource.arm_arch_timer.evtstrm=
+			[ARM,ARM64]
+			Format: <bool>
+			Enable/disable the eventstream feature of the ARM
+			architected timer so that code using WFE-based polling
+			loops can be debugged more effectively on production
+			systems.
+
 	clearcpuid=BITNUM [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit

arch/arc/kernel/time.c

@@ -116,19 +116,19 @@ static struct clocksource arc_counter_gfrc = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_gfrc(struct device_node *node)
+static int __init arc_cs_setup_gfrc(struct device_node *node)
 {
 	int exists = cpuinfo_arc700[0].extn.gfrc;
 	int ret;
 
 	if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected"))
-		return;
+		return -ENXIO;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
-	clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
 }
 CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 
@@ -172,25 +172,25 @@ static struct clocksource arc_counter_rtc = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_rtc(struct device_node *node)
+static int __init arc_cs_setup_rtc(struct device_node *node)
 {
 	int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc;
 	int ret;
 
 	if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected"))
-		return;
+		return -ENXIO;
 
 	/* Local to CPU hence not usable in SMP */
 	if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP"))
-		return;
+		return -EINVAL;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
 	write_aux_reg(AUX_RTC_CTRL, 1);
 
-	clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
 CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
 
@@ -213,23 +213,23 @@ static struct clocksource arc_counter_timer1 = {
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init arc_cs_setup_timer1(struct device_node *node)
+static int __init arc_cs_setup_timer1(struct device_node *node)
 {
 	int ret;
 
 	/* Local to CPU hence not usable in SMP */
 	if (IS_ENABLED(CONFIG_SMP))
-		return;
+		return -EINVAL;
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
-		return;
+		return ret;
 
 	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
 	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
 	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
 
-	clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
+	return clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
 }
 
 /********** Clock Event Device *********/
@@ -324,20 +324,28 @@ static struct notifier_block arc_timer_cpu_nb = {
 /*
  * clockevent setup for boot CPU
  */
-static void __init arc_clockevent_setup(struct device_node *node)
+static int __init arc_clockevent_setup(struct device_node *node)
 {
 	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
 	int ret;
 
-	register_cpu_notifier(&arc_timer_cpu_nb);
+	ret = register_cpu_notifier(&arc_timer_cpu_nb);
+	if (ret) {
+		pr_err("Failed to register cpu notifier");
+		return ret;
+	}
 
 	arc_timer_irq = irq_of_parse_and_map(node, 0);
-	if (arc_timer_irq <= 0)
-		panic("clockevent: missing irq");
+	if (arc_timer_irq <= 0) {
+		pr_err("clockevent: missing irq");
+		return -EINVAL;
+	}
 
 	ret = arc_get_timer_clk(node);
-	if (ret)
-		panic("clockevent: missing clk");
+	if (ret) {
+		pr_err("clockevent: missing clk");
+		return ret;
+	}
 
 	evt->irq = arc_timer_irq;
 	evt->cpumask = cpumask_of(smp_processor_id());
@@ -347,22 +355,29 @@ static void __init arc_clockevent_setup(struct device_node *node)
 	/* Needs apriori irq_set_percpu_devid() done in intc map function */
 	ret = request_percpu_irq(arc_timer_irq, timer_irq_handler,
 				 "Timer0 (per-cpu-tick)", evt);
-	if (ret)
-		panic("clockevent: unable to request irq\n");
+	if (ret) {
+		pr_err("clockevent: unable to request irq\n");
+		return ret;
+	}
 
 	enable_percpu_irq(arc_timer_irq, 0);
+
+	return 0;
 }
 
-static void __init arc_of_timer_init(struct device_node *np)
+static int __init arc_of_timer_init(struct device_node *np)
 {
 	static int init_count = 0;
+	int ret;
 
 	if (!init_count) {
 		init_count = 1;
-		arc_clockevent_setup(np);
+		ret = arc_clockevent_setup(np);
 	} else {
-		arc_cs_setup_timer1(np);
+		ret = arc_cs_setup_timer1(np);
 	}
+
+	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
 

arch/arm/Kconfig

@@ -358,10 +358,10 @@ config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
 	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
 	select COMMON_CLK
 	select CPU_ARM720T
 	select GENERIC_CLOCKEVENTS
+	select CLPS711X_TIMER
 	select MFD_SYSCON
 	select SOC_BUS
 	help

arch/arm/kernel/smp_twd.c

@@ -390,7 +390,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 }
 
 #ifdef CONFIG_OF
-static void __init twd_local_timer_of_register(struct device_node *np)
+static int __init twd_local_timer_of_register(struct device_node *np)
 {
 	int err;
 
@@ -410,6 +410,7 @@ static void __init twd_local_timer_of_register(struct device_node *np)
 
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
+	return err;
 }
 CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
 CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);

arch/arm/mach-bcm/Kconfig

@@ -89,6 +89,7 @@ config ARCH_BCM_MOBILE
 	select HAVE_ARM_ARCH_TIMER
 	select PINCTRL
 	select ARCH_BCM_MOBILE_SMP if SMP
+	select BCM_KONA_TIMER
 	help
 	  This enables support for systems based on Broadcom mobile SoCs.
 
@@ -143,6 +144,7 @@ config ARCH_BCM2835
 	select ARM_TIMER_SP804
 	select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7
 	select CLKSRC_OF
+	select BCM2835_TIMER
 	select PINCTRL
 	select PINCTRL_BCM2835
 	help

arch/arm/mach-integrator/Kconfig

@@ -20,7 +20,7 @@ if ARCH_INTEGRATOR
 
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select CLKSRC_MMIO
+	select INTEGRATOR_AP_TIMER
 	select MIGHT_HAVE_PCI
 	select SERIAL_AMBA_PL010 if TTY
 	select SERIAL_AMBA_PL010_CONSOLE if TTY

arch/arm/mach-keystone/Kconfig

@@ -4,7 +4,7 @@ config ARCH_KEYSTONE
 	depends on ARM_PATCH_PHYS_VIRT
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select CLKSRC_MMIO
+	select KEYSTONE_TIMER
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN

arch/arm/mach-moxart/Kconfig

@@ -3,7 +3,7 @@ menuconfig ARCH_MOXART
 	depends on ARCH_MULTI_V4
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select CLKSRC_MMIO
+	select MOXART_TIMER
 	select GENERIC_IRQ_CHIP
 	select ARCH_REQUIRE_GPIOLIB
 	select PHYLIB if NETDEVICES

arch/arm/mach-mxs/Kconfig

@@ -16,7 +16,7 @@ config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
+	select MXS_TIMER
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23

arch/arm/mach-nspire/Kconfig

@@ -7,5 +7,6 @@ config ARCH_NSPIRE
 	select ARM_AMBA
 	select ARM_VIC
 	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
 	help
 	  This enables support for systems using the TI-NSPIRE CPU

arch/arm/mach-prima2/Kconfig

@@ -28,6 +28,7 @@ config ARCH_ATLAS7
 	default y
 	select ARM_GIC
 	select CPU_V7
+	select ATLAS7_TIMER
 	select HAVE_ARM_SCU if SMP
 	select HAVE_SMP
 	help
@@ -38,6 +39,7 @@ config ARCH_PRIMA2
 	default y
 	select SIRF_IRQ
 	select ZONE_DMA
+	select PRIMA2_TIMER
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 

arch/arm/mach-u300/Kconfig

@@ -4,7 +4,7 @@ menuconfig ARCH_U300
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
-	select CLKSRC_MMIO
+	select U300_TIMER
 	select CPU_ARM926T
 	select HAVE_TCM
 	select PINCTRL

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -492,6 +492,14 @@
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	rktimer: rktimer@ff850000 {
+		compatible = "rockchip,rk3399-timer";
+		reg = <0x0 0xff850000 0x0 0x1000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
+		clock-names = "pclk", "timer";
+	};
+
 	spdif: spdif@ff870000 {
 		compatible = "rockchip,rk3399-spdif";
 		reg = <0x0 0xff870000 0x0 0x1000>;