Merge tag 'extcon-fixes-for-4.16-rc3' of git://git.kernel.org/pub/scm…

…/linux/kernel/git/chanwoo/extcon into char-misc-linus

Chanwoo writes:

Update extcon for v4.16-rc3

This patch fixes issue of X-power extcon-axp288 and Intel extcon-int3496 driver.
- For extcon-int3496 driver,
Process id-pin first so that we start with the right status in order to fix
a race where the initial work might still be running while other drivers
were already calling extcon_get_state().
- For extcon-axp288 driver,
Revert the patch[1] which were applied to v4.16-rc1 because there are better
ways with usb-role-switch and constify the axp288_pwr_up_down_info array.
[1] 60ed999 ("extcon: axp288: Redo charger type detection a couple of seconds after probe()")

drivers/extcon/extcon-axp288.c

@@ -1,7 +1,6 @@
 /*
  * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
  *
- * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
  * Copyright (C) 2015 Intel Corporation
  * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
  *
@@ -98,15 +97,13 @@ struct axp288_extcon_info {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *regmap_irqc;
-	struct delayed_work det_work;
 	int irq[EXTCON_IRQ_END];
 	struct extcon_dev *edev;
 	unsigned int previous_cable;
-	bool first_detect_done;
 };
 
 /* Power up/down reason string array */
-static char *axp288_pwr_up_down_info[] = {
+static const char * const axp288_pwr_up_down_info[] = {
 	"Last wake caused by user pressing the power button",
 	"Last wake caused by a charger insertion",
 	"Last wake caused by a battery insertion",
@@ -124,7 +121,7 @@ static char *axp288_pwr_up_down_info[] = {
  */
 static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
 {
-	char **rsi;
+	const char * const *rsi;
 	unsigned int val, i, clear_mask = 0;
 	int ret;
 
@@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
 	regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
 }
 
-static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
-{
-	/*
-	 * We depend on other drivers to do things like mux the data lines,
-	 * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
-	 * not set these things up correctly resulting in the initial charger
-	 * cable type detection giving a wrong result and we end up not charging
-	 * or charging at only 0.5A.
-	 *
-	 * So we schedule a second cable type detection after 2 seconds to
-	 * give the other drivers time to load and do their thing.
-	 */
-	if (!info->first_detect_done) {
-		queue_delayed_work(system_wq, &info->det_work,
-				   msecs_to_jiffies(2000));
-		info->first_detect_done = true;
-	}
-}
-
 static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 {
 	int ret, stat, cfg, pwr_stat;
@@ -223,8 +201,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 		info->previous_cable = cable;
 	}
 
-	axp288_chrg_detect_complete(info);
-
 	return 0;
 
 dev_det_ret:
@@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void axp288_extcon_det_work(struct work_struct *work)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
 {
-	struct axp288_extcon_info *info =
-		container_of(work, struct axp288_extcon_info, det_work.work);
-
 	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
 						BC_GLOBAL_RUN, 0);
 	/* Enable the charger detection logic */
@@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	info->regmap = axp20x->regmap;
 	info->regmap_irqc = axp20x->regmap_irqc;
 	info->previous_cable = EXTCON_NONE;
-	INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
 
 	platform_set_drvdata(pdev, info);
 
@@ -318,7 +290,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	}
 
 	/* Start charger cable type detection */
-	queue_delayed_work(system_wq, &info->det_work, 0);
+	axp288_extcon_enable(info);
 
 	return 0;
 }

drivers/extcon/extcon-intel-int3496.c

@@ -153,8 +153,9 @@ static int int3496_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* queue initial processing of id-pin */
+	/* process id-pin so that we start with the right status */
 	queue_delayed_work(system_wq, &data->work, 0);
+	flush_delayed_work(&data->work);
 
 	platform_set_drvdata(pdev, data);