Merge branches 'ib-mfd-gpio-i2c-3.19', 'ib-mfd-iio-3.19' and 'ib-mfd-…

…regulator-v3.19', tag 'ib-mfd-regulator-clk-v3.19' into ibs-for-mfd-merged

Immutable branch between MFD, Regulator and Clk, due for v3.19

Documentation/devicetree/bindings/mfd/s2mps11.txt

@@ -1,14 +1,14 @@
 
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
 
 The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
 interfaced to the host controller using an I2C interface. Each sub-block is
 addressed by the host system using different I2C slave addresses.
 
 Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
-              or "samsung,s2mpu02-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+	      or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
 - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
 
 Optional properties:
@@ -17,8 +17,8 @@ Optional properties:
 - interrupts: Interrupt specifiers for interrupt sources.
 
 Optional nodes:
-- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
-  outputs, so to register these as clocks with common clock framework
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+  KHz outputs, so to register these as clocks with common clock framework
   instantiate a sub-node named "clocks". It uses the common clock binding
   documented in :
   [Documentation/devicetree/bindings/clock/clock-bindings.txt]
@@ -30,12 +30,12 @@ Optional nodes:
     the clock which they consume.
     Clock               ID           Devices
     ----------------------------------------------------------
-    32KhzAP		0            S2MPS11, S2MPS14, S5M8767
-    32KhzCP		1            S2MPS11, S5M8767
-    32KhzBT		2            S2MPS11, S2MPS14, S5M8767
+    32KhzAP		0            S2MPS11, S2MPS13, S2MPS14, S5M8767
+    32KhzCP		1            S2MPS11, S2MPS13, S5M8767
+    32KhzBT		2            S2MPS11, S2MPS13, S2MPS14, S5M8767
 
-  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
-		"samsung,s5m8767-clk"
+  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+		"samsung,s2mps14-clk", "samsung,s5m8767-clk"
 
 - regulators: The regulators of s2mps11 that have to be instantiated should be
 included in a sub-node named 'regulators'. Regulator nodes included in this
@@ -81,12 +81,14 @@ as per the datasheet of s2mps11.
 	- LDOn
 		  - valid values for n are:
 			- S2MPS11: 1 to 38
+			- S2MPS13: 1 to 40
 			- S2MPS14: 1 to 25
 			- S2MPU02: 1 to 28
 		  - Example: LDO1, LDO2, LDO28
 	- BUCKn
 		  - valid values for n are:
 			- S2MPS11: 1 to 10
+			- S2MPS13: 1 to 10
 			- S2MPS14: 1 to 5
 			- S2MPU02: 1 to 7
 		  - Example: BUCK1, BUCK2, BUCK9

drivers/clk/clk-s2mps11.c

@@ -23,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/mfd/samsung/core.h>
@@ -120,6 +121,24 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
 	},
 };
 
+static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
+	[S2MPS11_CLK_AP] = {
+		.name = "s2mps13_ap",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+	[S2MPS11_CLK_CP] = {
+		.name = "s2mps13_cp",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+	[S2MPS11_CLK_BT] = {
+		.name = "s2mps13_bt",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+};
+
 static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
 	[S2MPS11_CLK_AP] = {
 		.name = "s2mps14_ap",
@@ -184,6 +203,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
 		clks_init = s2mps11_clks_init;
 		break;
+	case S2MPS13X:
+		s2mps11_reg = S2MPS13_REG_RTCCTRL;
+		clks_init = s2mps13_clks_init;
+		break;
 	case S2MPS14X:
 		s2mps11_reg = S2MPS14_REG_RTCCTRL;
 		clks_init = s2mps14_clks_init;
@@ -279,6 +302,7 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
 
 static const struct platform_device_id s2mps11_clk_id[] = {
 	{ "s2mps11-clk", S2MPS11X},
+	{ "s2mps13-clk", S2MPS13X},
 	{ "s2mps14-clk", S2MPS14X},
 	{ "s5m8767-clk", S5M8767X},
 	{ },

drivers/gpio/Kconfig

@@ -905,4 +905,16 @@ config GPIO_VIPERBOARD
           River Tech's viperboard.h for detailed meaning
           of the module parameters.
 
+config GPIO_DLN2
+	tristate "Diolan DLN2 GPIO support"
+	depends on MFD_DLN2
+	select GPIOLIB_IRQCHIP
+
+	help
+	  Select this option to enable GPIO driver for the Diolan DLN2
+	  board.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called gpio-dln2.
+
 endif

drivers/gpio/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_GPIO_CRYSTAL_COVE)	+= gpio-crystalcove.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_GPIO_DA9055)	+= gpio-da9055.o
 obj-$(CONFIG_GPIO_DAVINCI)	+= gpio-davinci.o
+obj-$(CONFIG_GPIO_DLN2)		+= gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)	+= gpio-dwapb.o
 obj-$(CONFIG_GPIO_EM)		+= gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o