Merge tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are some USB fixes for the 3.7 tree.

  Nothing huge here, just a number of tiny bugfixes resolving issues
  that have been found, and two reverts of patches that were found to
  have caused problems.

  All of these have been in linux-next already.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB/host: Cleanup unneccessary irq disable code"
  USB: option: add Alcatel X220/X500D USB IDs
  USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs
  USB: keyspan: fix typo causing GPF on open
  USB: fix build with XEN and EARLY_PRINTK_DBGP enabled but USB_SUPPORT disabled
  USB: usb_wwan: fix bulk-urb allocation
  usb: otg: Fix build errors if USB_MUSB_OMAP2PLUS is selected as module
  usb: musb: ux500: fix 'musbid' undeclared error in ux500_remove()
  Revert "usb: musb: use DMA mode 1 whenever possible"

drivers/usb/core/hcd.c

@@ -2151,15 +2151,23 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
 irqreturn_t usb_hcd_irq (int irq, void *__hcd)
 {
 	struct usb_hcd		*hcd = __hcd;
+	unsigned long		flags;
 	irqreturn_t		rc;
 
+	/* IRQF_DISABLED doesn't work correctly with shared IRQs
+	 * when the first handler doesn't use it.  So let's just
+	 * assume it's never used.
+	 */
+	local_irq_save(flags);
+
 	if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
 		rc = IRQ_NONE;
 	else if (hcd->driver->irq(hcd) == IRQ_NONE)
 		rc = IRQ_NONE;
 	else
 		rc = IRQ_HANDLED;
 
+	local_irq_restore(flags);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_irq);
@@ -2347,6 +2355,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd,
 	int retval;
 
 	if (hcd->driver->irq) {
+
+		/* IRQF_DISABLED doesn't work as advertised when used together
+		 * with IRQF_SHARED. As usb_hcd_irq() will always disable
+		 * interrupts we can remove it here.
+		 */
+		if (irqflags & IRQF_SHARED)
+			irqflags &= ~IRQF_DISABLED;
+
 		snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
 				hcd->driver->description, hcd->self.busnum);
 		retval = request_irq(irqnum, &usb_hcd_irq, irqflags,

drivers/usb/early/ehci-dbgp.c

@@ -20,6 +20,7 @@
 #include <linux/usb/ehci_def.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
+#include <linux/kconfig.h>
 #include <linux/kgdb.h>
 #include <linux/kthread.h>
 #include <asm/io.h>
@@ -614,12 +615,6 @@ static int _dbgp_external_startup(void)
 	return -ENODEV;
 }
 
-int dbgp_external_startup(struct usb_hcd *hcd)
-{
-	return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
-}
-EXPORT_SYMBOL_GPL(dbgp_external_startup);
-
 static int ehci_reset_port(int port)
 {
 	u32 portsc;
@@ -979,6 +974,7 @@ struct console early_dbgp_console = {
 	.index =	-1,
 };
 
+#if IS_ENABLED(CONFIG_USB_EHCI_HCD)
 int dbgp_reset_prep(struct usb_hcd *hcd)
 {
 	int ret = xen_dbgp_reset_prep(hcd);
@@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd)
 }
 EXPORT_SYMBOL_GPL(dbgp_reset_prep);
 
+int dbgp_external_startup(struct usb_hcd *hcd)
+{
+	return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup();
+}
+EXPORT_SYMBOL_GPL(dbgp_external_startup);
+#endif /* USB_EHCI_HCD */
+
 #ifdef CONFIG_KGDB
 
 static char kgdbdbgp_buf[DBGP_MAX_PACKET];

drivers/usb/host/ehci-ls1x.c

@@ -113,7 +113,7 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev)
 		goto err_put_hcd;
 	}
 
-	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret)
 		goto err_put_hcd;
 

drivers/usb/host/ohci-xls.c

@@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver,
 		goto err3;
 	}
 
-	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (retval != 0)
 		goto err4;
 	return retval;

drivers/usb/musb/musb_gadget.c

@@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 		fifo_count = musb_readw(epio, MUSB_RXCOUNT);
 
 		/*
-		 *  use mode 1 only if we expect data of at least ep packet_sz
-		 *  and have not yet received a short packet
+		 * Enable Mode 1 on RX transfers only when short_not_ok flag
+		 * is set. Currently short_not_ok flag is set only from
+		 * file_storage and f_mass_storage drivers
 		 */
-		if ((request->length - request->actual >= musb_ep->packet_sz) &&
-			(fifo_count >= musb_ep->packet_sz))
+
+		if (request->short_not_ok && fifo_count == musb_ep->packet_sz)
 			use_mode_1 = 1;
 		else
 			use_mode_1 = 0;
@@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				c = musb->dma_controller;
 				channel = musb_ep->dma;
 
+	/* We use DMA Req mode 0 in rx_csr, and DMA controller operates in
+	 * mode 0 only. So we do not get endpoint interrupts due to DMA
+	 * completion. We only get interrupts from DMA controller.
+	 *
+	 * We could operate in DMA mode 1 if we knew the size of the tranfer
+	 * in advance. For mass storage class, request->length = what the host
+	 * sends, so that'd work.  But for pretty much everything else,
+	 * request->length is routinely more than what the host sends. For
+	 * most these gadgets, end of is signified either by a short packet,
+	 * or filling the last byte of the buffer.  (Sending extra data in
+	 * that last pckate should trigger an overflow fault.)  But in mode 1,
+	 * we don't get DMA completion interrupt for short packets.
+	 *
+	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
+	 * to get endpoint interrupt on every DMA req, but that didn't seem
+	 * to work reliably.
+	 *
+	 * REVISIT an updated g_file_storage can set req->short_not_ok, which
+	 * then becomes usable as a runtime "use mode 1" hint...
+	 */
+
 				/* Experimental: Mode1 works with mass storage use cases */
 				if (use_mode_1) {
 					csr |= MUSB_RXCSR_AUTOCLEAR;

drivers/usb/musb/ux500.c

@@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev)
 	struct platform_device		*musb;
 	struct ux500_glue		*glue;
 	struct clk			*clk;
-
+	int				musbid;
 	int				ret = -ENOMEM;
 
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);

drivers/usb/otg/Kconfig

@@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT
 
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030
+	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 	select USB_OTG_UTILS
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
@@ -68,7 +68,7 @@ config TWL4030_USB
 
 config TWL6030_USB
 	tristate "TWL6030 USB Transceiver Driver"
-	depends on TWL4030_CORE && OMAP_USB2
+	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
 	select USB_OTG_UTILS
 	help
 	  Enable this to support the USB OTG transceiver on TWL6030

drivers/usb/serial/keyspan.c

@@ -2430,7 +2430,7 @@ static void keyspan_release(struct usb_serial *serial)
 static int keyspan_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	struct keyspan_port_private *s_priv;
+	struct keyspan_serial_private *s_priv;
 	struct keyspan_port_private *p_priv;
 	const struct keyspan_device_details *d_details;
 	struct callbacks *cback;
@@ -2445,7 +2445,6 @@ static int keyspan_port_probe(struct usb_serial_port *port)
 	if (!p_priv)
 		return -ENOMEM;
 
-	s_priv = usb_get_serial_data(port->serial);
 	p_priv->device_details = d_details;
 
 	/* Setup values for the various callback routines */

drivers/usb/serial/option.c

@@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb);
 #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED	0x8001
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED	0x9000
 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED	0x9001
+#define NOVATELWIRELESS_PRODUCT_E362		0x9010
 #define NOVATELWIRELESS_PRODUCT_G1		0xA001
 #define NOVATELWIRELESS_PRODUCT_G1_M		0xA002
 #define NOVATELWIRELESS_PRODUCT_G2		0xA010
@@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb);
 #define DELL_PRODUCT_5730_MINICARD_TELUS	0x8181
 #define DELL_PRODUCT_5730_MINICARD_VZW		0x8182
 
+#define DELL_PRODUCT_5800_MINICARD_VZW		0x8195  /* Novatel E362 */
+#define DELL_PRODUCT_5800_V2_MINICARD_VZW	0x8196  /* Novatel E362 */
+
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
 #define KYOCERA_PRODUCT_KPC680			0x180a
@@ -283,6 +287,7 @@ static void option_instat_callback(struct urb *urb);
 /* ALCATEL PRODUCTS */
 #define ALCATEL_VENDOR_ID			0x1bbb
 #define ALCATEL_PRODUCT_X060S_X200		0x0000
+#define ALCATEL_PRODUCT_X220_X500D		0x0017
 
 #define PIRELLI_VENDOR_ID			0x1266
 #define PIRELLI_PRODUCT_C100_1			0x1002
@@ -706,6 +711,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
 	/* Novatel Ovation MC551 a.k.a. Verizon USB551L */
 	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
 	{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
@@ -728,6 +734,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) },	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
 	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, 	/* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -1157,6 +1165,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
 	},
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),

drivers/usb/serial/usb_wwan.c

@@ -455,9 +455,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
 	struct usb_serial *serial = port->serial;
 	struct urb *urb;
 
-	if (endpoint == -1)
-		return NULL;	/* endpoint not needed */
-
 	urb = usb_alloc_urb(0, GFP_KERNEL);	/* No ISO */
 	if (urb == NULL) {
 		dev_dbg(&serial->interface->dev,
@@ -489,6 +486,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	init_usb_anchor(&portdata->delayed);
 
 	for (i = 0; i < N_IN_URB; i++) {
+		if (!port->bulk_in_size)
+			break;
+
 		buffer = (u8 *)__get_free_page(GFP_KERNEL);
 		if (!buffer)
 			goto bail_out_error;
@@ -502,8 +502,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port)
 	}
 
 	for (i = 0; i < N_OUT_URB; i++) {
-		if (port->bulk_out_endpointAddress == -1)
-			continue;
+		if (!port->bulk_out_size)
+			break;
 
 		buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 		if (!buffer)