Merge branch 'mlxsw-selftest-fixes'

Petr Machata says:

====================
selftests: mlxsw: Fixes

This patch set carries fixes to selftest issues that we have hit in our
nightly regression run. Almost all are in mlxsw selftests, though one is in
a generic forwarding selftest.

- In patch #1, in an ERSPAN test, install an FDB entry as static instead of
  (implicitly) as local.

- In the mlxsw resource-scale test, an if statement overrides the value of
  $?, which is supposed to contain the result of the test. As a result, the
  resource scale test can spuriously pass.

  In patches #2 and #3, remove the if statements to fix the issue in,
  respectively, port_scale test and tc_flower_scale tests.

- Again in the mlxsw resource-scale test, when more then one sub-test is
  run, a successful sub-test overrides any previous failures. This causes a
  spurious pass of the overall test. This is fixed in patch #4.

- In patch #5, increase a tolerance in a mlxsw-specific RED backlog test.
  This test is very noisy, due to rounding errors and the unpredictability
  of software traffic generation. By bumping the tolerance from 5 % to 10,
  get the failure rate to zero. This shouldn't impact the accuracy,
  mistakes in backlog configuration (e.g. due to wrong cell size) are
  likely to cause a much larger discrepancy.

- In patch #6, fix mausezahn invocation in the mlxsw ERSPAN scale
  test. The test failed because of the wrong invocation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh

@@ -120,12 +120,13 @@ __mirror_gre_test()
 	sleep 5
 
 	for ((i = 0; i < count; ++i)); do
+		local sip=$(mirror_gre_ipv6_addr 1 $i)::1
 		local dip=$(mirror_gre_ipv6_addr 1 $i)::2
 		local htun=h3-gt6-$i
 		local message
 
 		icmp6_capture_install $htun
-		mirror_test v$h1 "" $dip $htun 100 10
+		mirror_test v$h1 $sip $dip $htun 100 10
 		icmp6_capture_uninstall $htun
 	done
 }

tools/testing/selftests/drivers/net/mlxsw/port_scale.sh

@@ -55,10 +55,6 @@ port_test()
 	      | jq '.[][][] | select(.name=="physical_ports") |.["occ"]')
 
 	[[ $occ -eq $max_ports ]]
-	if [[ $should_fail -eq 0 ]]; then
-		check_err $? "Mismatch ports number: Expected $max_ports, got $occ."
-	else
-		check_err_fail $should_fail $? "Reached more ports than expected"
-	fi
+	check_err_fail $should_fail $? "Attempt to create $max_ports ports (actual result $occ)"
 
 }

tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh

@@ -507,8 +507,8 @@ do_red_test()
 	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
 	local diff=$((limit - backlog))
 	pct=$((100 * diff / limit))
-	((0 <= pct && pct <= 5))
-	check_err $? "backlog $backlog / $limit expected <= 5% distance"
+	((0 <= pct && pct <= 10))
+	check_err $? "backlog $backlog / $limit expected <= 10% distance"
 	log_test "TC $((vlan - 10)): RED backlog > limit"
 
 	stop_traffic

tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh

@@ -30,6 +30,7 @@ trap cleanup EXIT
 
 ALL_TESTS="router tc_flower mirror_gre tc_police port"
 for current_test in ${TESTS:-$ALL_TESTS}; do
+	RET_FIN=0
 	source ${current_test}_scale.sh
 
 	num_netifs_var=${current_test^^}_NUM_NETIFS
@@ -48,8 +49,9 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 		else
 			log_test "'$current_test' overflow $target"
 		fi
+		RET_FIN=$(( RET_FIN || RET ))
 	done
 done
 current_test=""
 
-exit "$RET"
+exit "$RET_FIN"

tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh

@@ -24,6 +24,7 @@ trap cleanup EXIT
 
 ALL_TESTS="router tc_flower mirror_gre tc_police port"
 for current_test in ${TESTS:-$ALL_TESTS}; do
+	RET_FIN=0
 	source ${current_test}_scale.sh
 
 	num_netifs_var=${current_test^^}_NUM_NETIFS
@@ -50,8 +51,9 @@ for current_test in ${TESTS:-$ALL_TESTS}; do
 				log_test "'$current_test' [$profile] overflow $target"
 			fi
 		done
+		RET_FIN=$(( RET_FIN || RET ))
 	done
 done
 current_test=""
 
-exit "$RET"
+exit "$RET_FIN"

tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh

@@ -98,11 +98,7 @@ __tc_flower_test()
 			jq -r '[ .[] | select(.kind == "flower") |
 			.options | .in_hw ]' | jq .[] | wc -l)
 	[[ $((offload_count - 1)) -eq $count ]]
-	if [[ $should_fail -eq 0 ]]; then
-		check_err $? "Offload mismatch"
-	else
-		check_err_fail $should_fail $? "Offload more than expacted"
-	fi
+	check_err_fail $should_fail $? "Attempt to offload $count rules (actual result $((offload_count - 1)))"
 }
 
 tc_flower_test()

tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh

@@ -271,7 +271,7 @@ test_span_gre_fdb_roaming()
 
 	while ((RET == 0)); do
 		bridge fdb del dev $swp3 $h3mac vlan 555 master 2>/dev/null
-		bridge fdb add dev $swp2 $h3mac vlan 555 master
+		bridge fdb add dev $swp2 $h3mac vlan 555 master static
 		sleep 1
 		fail_test_span_gre_dir $tundev ingress
 

tools/testing/selftests/net/forwarding/mirror_lib.sh

@@ -20,6 +20,13 @@ mirror_uninstall()
 	tc filter del dev $swp1 $direction pref 1000
 }
 
+is_ipv6()
+{
+	local addr=$1; shift
+
+	[[ -z ${addr//[0-9a-fA-F:]/} ]]
+}
+
 mirror_test()
 {
 	local vrf_name=$1; shift
@@ -29,9 +36,17 @@ mirror_test()
 	local pref=$1; shift
 	local expect=$1; shift
 
+	if is_ipv6 $dip; then
+		local proto=-6
+		local type="icmp6 type=128" # Echo request.
+	else
+		local proto=
+		local type="icmp echoreq"
+	fi
+
 	local t0=$(tc_rule_stats_get $dev $pref)
-	$MZ $vrf_name ${sip:+-A $sip} -B $dip -a own -b bc -q \
-	    -c 10 -d 100msec -t icmp type=8
+	$MZ $proto $vrf_name ${sip:+-A $sip} -B $dip -a own -b bc -q \
+	    -c 10 -d 100msec -t $type
 	sleep 0.5
 	local t1=$(tc_rule_stats_get $dev $pref)
 	local delta=$((t1 - t0))